Newbie trying to figure seats
Hey guys. I have been here for a cpl years and have never actually needed to post due to the ground that you all have covered over years.
However my search has stalled. My burb two late model buckets and nothing else. I am looking at 2008 full suburban set up. I cannot find if anyone has attempted this with or without success. I am certain it will require fab, but i am most concerned w fitment of width and ride heights for back 2 rows. Any help/feedback is huge. The seats are good enough shape i dont need upholstered, so that is a huge plus. Thx! Have 1968 burb for reference |
Re: Newbie trying to figure seats
Quote:
Woody |
Re: Newbie trying to figure seats
Welcome aboard! You might look at FrizzleFry's Tahoe thread. I seem to remember he used some later model seats in his build.
http://67-72chevytrucks.com/vboard/s...d.php?t=239896 |
Re: Newbie trying to figure seats
Thanks guys. OmG, frizzle's build! I wouldn't be able to cut a piece of paper and put it back together that seamlessly.
Unfortunately, i have no seat frames or anything to try and reuse. |
Re: Newbie trying to figure seats
I installed front and middle buckets and 3rd row from 05 escalade in my 71 burb. Fronts bolted right in with a few shims. Middle buckets took some work due to the step in floor but came out awesome. I then made brackets for floor to mount removable 3rd row seat which is nice to be able to take in and out easily
|
Re: Newbie trying to figure seats
Quote:
Woody |
Re: Newbie trying to figure seats
1 Attachment(s)
Here is a shot from the back
|
Re: Newbie trying to figure seats
3 Attachment(s)
Quote:
Woody This is what I'm starting with: Was told the front is from an '89? 2nd and 3rd rows are original but seat bottoms are shredded from desert heat! Attachment 1895677 Attachment 1895678 Attachment 1895679 |
All times are GMT -4. The time now is 10:17 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com