The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - replacing blower motor (https://67-72chevytrucks.com/vboard/showthread.php?t=820246)

69Tom

04-01-2021 03:55 PM

replacing blower motor

I'm replacing the blower motor in my 74 C20 with a NOS Delco motor. While there's actually a retaining nut, I'm pretty sure the plastic fan cage/blades is pressed on, correct? If so, how have you all removed it without damaging the plastic?

About to remove it tonight and was wondering if there's any tips.

Thanks.

Bandit130

04-01-2021 05:46 PM

Re: replacing blower motor

Should be able to remove nut and pull it off carefully.

69Tom

04-01-2021 07:12 PM

Re: replacing blower motor

OK, thanks. I'll give it a shot tonight.

Corts60

04-03-2021 08:37 AM

Re: replacing blower motor

Yep, just slide it off after nut is removed.

All times are GMT -4. The time now is 10:34 PM.