The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Question on vin and spid (https://67-72chevytrucks.com/vboard/showthread.php?t=771546)

Dwyert4

09-17-2018 05:51 PM

Question on vin and spid

2 Attachment(s)

I figured out most of vin I think. 70 3/4 heavy long bed stepper. Has a 10 bolt rear end? Also 8 lugs axles. Is this considered a c20? Also what rear end is this and last but not least will the front clip fit a c10? Vin and spid pic included..

Mike C

09-17-2018 08:47 PM

Re: Question on vin and spid

The sheetmetal will work fine on a C10. Sounds like you have the Eaton HO52 rear axle in that truck. Not a whole lot of options,eh?

jocko

09-17-2018 10:24 PM

Re: Question on vin and spid

1 Attachment(s)

Yes, a 70 V8 C20 - and the sheetmetal is interchangeable. Note that, per the model #, I believe your truck was born a LB fleetside - appears the long step bed has been added at some point. Here's a flip for ya.

Dwyert4

09-18-2018 05:49 AM

Re: Question on vin and spid

Thanks for the help. I'm trying to see if I can pick it up for a parts truck and part out the rest but the guy thinks he has a rusted gold mine. The stuff I need is in driver shape but the cab and bed leave a lot to be desired. Didn't even realize it should be a fleetside.

All times are GMT -4. The time now is 10:05 AM.