Noob with a LWB 72 Cheyenne 396 NEED ADVICE
2 Attachment(s)
Hey all! Glad to be here. I just nabbed this beaut and I have a few pieces of the puzzle to complete.
Primarily, it needs to have some love given to the bed floor. Im really leaning toward a wood floor to replace the steel one that has some minor rust holes in it. All in all its really solid, but I love the look of wood. Im leaning toward a bedwoodandparts.com RetroLiner. Anyone have any experience here? Advice? Im really attracted to what I perceive as a super easy installation. Also, I want to replace the wheels and tires. Id love some advice. I prefer the look of a 20 wheel. Anyone have any other suggestions? I think shes pretty sexy as she is, but even the hottest go under the knife for enhancement every now and then. 😆 |
Re: Noob with a LWB 72 Cheyenne 396 NEED ADVICE
Hey! Welcome to the site. I am going to copy this over to the 67-72 message board for you. A lot of members forget about the welcome area of the site. That side has a great group that will help you out
|
Re: Noob with a LWB 72 Cheyenne 396 NEED ADVICE
Nice looking truck! Sorry, l dont have any advice for you. We love pics- welcome to the site
|
Re: Noob with a LWB 72 Cheyenne 396 NEED ADVICE
You might like to look here at this truck. http://67-72chevytrucks.com/vboard/s...=756258&page=3
|
Re: Noob with a LWB 72 Cheyenne 396 NEED ADVICE
A very nice truck you have. Love the color combo and the fact it's a big block. I myself have never been a fan of the overlay type bed kits. It would seem that it would trap water and cause rust( some cope around the bed tubs).
|
Re: Noob with a LWB 72 Cheyenne 396 NEED ADVICE
Love it! Someone already posted a link to my build thread :)
|
Re: Noob with a LWB 72 Cheyenne 396 NEED ADVICE
1 Attachment(s)
I had these 17's on mine. I sold them and I'm looking at 20's now. Of course I keep a set of whitewalls on rallies for when I'm in that mood.
|
Re: Noob with a LWB 72 Cheyenne 396 NEED ADVICE
welcome and what a beautiful truck !
|
Re: Noob with a LWB 72 Cheyenne 396 NEED ADVICE
1 Attachment(s)
20's on Shortwide
|
Re: Noob with a LWB 72 Cheyenne 396 NEED ADVICE
Thanks!
|
Re: Noob with a LWB 72 Cheyenne 396 NEED ADVICE
Quote:
|
Re: Noob with a LWB 72 Cheyenne 396 NEED ADVICE
Quote:
Is there a good resource anywhere detailing the process of doing a steel to wood conversion? I mean, how hard is it? |
Re: Noob with a LWB 72 Cheyenne 396 NEED ADVICE
Mar-K should have everything you need for the conversion. On the website look under tips and tricks. There is a how- to on steel to wood conversion.https://www.mar-k.com/
|
Re: Noob with a LWB 72 Cheyenne 396 NEED ADVICE
The whole bed needs to come apart to covert to wood. Then you need a new/different rear sill and either a weld on strip or different front panel. Those two cuzz of the different heights between steel and wood. That means paint on front panel. Almost same price ( 1k) to go back steel or go wood. Less labor to stay steel, but bed still has to come off/apart. Also think long term. Wood needs revarnished after every few yrs, even using the good stuff, like Epifanes spar varnish.
|
Re: Noob with a LWB 72 Cheyenne 396 NEED ADVICE
Truck looks great as it is.....I also considered wood but the expense and work to get it done was way off for me. You could have the rust areas repaired and use tinted bed liner. Just another 2 cents.
|
Re: Noob with a LWB 72 Cheyenne 396 NEED ADVICE
If you go the patch route, I've got a swb fleetside bed floor you can have for nothing. I'm not that far from you. PLENTY of patch material left for someone to use.
|
Re: Noob with a LWB 72 Cheyenne 396 NEED ADVICE
Btw, are there any vendors on here that sell wheel and tire packages for smoking deals to forum members?
|
All times are GMT -4. The time now is 05:44 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com