Rods 57
 

Ok so i have been hanging out here a while but have not posted my build yet. So here it is. I started with 3 trucks a 55 GMC big window, a 57 Chevy and a 59 Chevy. total cost 1700, drove one home. the first pic is the left over parts truck that i sold for $600.

Attachment 765193

i used the 55 cab, the 59 dash, it was perfect and i had no GMC parts and the frame and bed from the 57. I got a 78 camero for $50 and used the front clip, rear end, brake pedal cluster and trans. Shes a real looker huh...my wife would not even let it off the trailer, not kidding.

Attachment 765194

A local guy here in Idaho has a jig to do the front clip he has done like 40 of them so no credit to me for that part. I got a killer deal to get sandblasting done and was able to get the frame, cab and a ton of pieces done.

Attachment 765199

Attachment 765200

Attachment 765201

Re: Rods 57
 

Then i got a motor from a friend that had the block numbers damaged so its a 75 blaser or corvette, I am sticking with the vette story cause it sounds cooler.
Any way its a 4 bolt 350, heads with 202 valves and roller rockers, mild cam. turbo 350 from the camero, rebuilt trans twice but that's a long story and it was costly, and my fault. one and only time i have ever broken a case while bolting it in.

Attachment 765202

I made a rat rod engine stand that holds the engine and trans out of scrap in two hours, cause i wanted to..

Attachment 765203

posi in the 10 bolt that i picked up for $100

Attachment 765204

longer rear shackles, removed some springs.

Attachment 765205

all new front end components.

Attachment 765206

Re: Rods 57
 

Aluminum fuel tank in the rear.

Attachment 765207

Wide whites on all fours and red steel wheels.

Attachment 765208
Attachment 765209

Weld and grind time now. Meet Kabwe on-line and started cutting up the body shortly after that. thanks man.

Attachment 765210
Attachment 765211

Re: Rods 57
 

More cut and weld, cab was dropped on its back at some point so I needed to do a lot of welding and cutting.

Attachment 765214

Attachment 765215

Attachment 765216

Re: Rods 57
 

Great job man, everything is looking really good. I'm glad you started a build thread. Keep the pics coming.

Re: Rods 57
 

wow nice looking frame...what are your plans for a color on the truck with the red frame? Same color or a contrasting color?

Re: Rods 57
 

Thanks, O am planning on the paint being black, flat or shine is still up in the air.

Re: Rods 57
 

Love the frame! If I were to do mine over, the frame would be bight red. Welcome to the site, keep us posted. Looks like you're doing an awesome job!
Byron

Re: Rods 57
 

Thanks for the comments, not a professional so I was a bit nervous putting up pictures of my work.

Re: Rods 57
 

Man no need to be nervous about that, I come here to look at the home builders stuff. I'm not much interested in professional builder's stuff they should build nice stuff they do it for a living. I'm a home builder so I'm more impressed by the things coming out of peoples home garages (and there are some really talented home builders here). In my opinion that is what hotrodding is all about, building it yourself. I find it more impressive to look at a car that someone built themselves than to look at a high dollar shop car, but that's just me. When I go to the shows I may walk through the indoor area to look at the craftsmanship of the pro builds but I spend most my time in the parking lot looking at the rides people built and drove to the show.

Re: Rods 57
 

Looks good to me, keep us updated.

Re: Rods 57
 

Very nice looking frame.
Nice job on the cab repairs also.
Keep the pics coming.
Kim

Re: Rods 57
 

Very nice build. My camaro clip install is close to yours. How much clearance do you have from distributor to firewall? I see you used the stock motor mounts, which i plan on using if i can. Keep the pics coming.

Re: Rods 57
 

Very nice clip integration there. Very smooth. Got closer pics of the frame where the clio meet?

Re: Rods 57
 

here are the closer pics, i will try to blow them up if i can.

Attachment 765444
Attachment 765445

Re: Rods 57
 

Good job, I think when you do something to the truck for the first time you get kinda nervous but once you get into it and it starts to turn out how you want it you get more confidence, this is what I say now, if I mess it up I can always do it over.

Love the red frame paint, is it single stage of BC/CC?

Tri5

Re: Rods 57
 

Thanks a lot. I really like it now that i did it. Its actually red baron red powder coat. I agree with you, its kind a hard at first then you cut something, fit it back together and it looks better and you gain confidence.

Re: Rods 57
 

Here are some more of the cab, the steps needed to go and i had to re-build the drip rails it had 69 holes in the firewall, yes 69 I don't know why. fuel door filled in.

Attachment 765544

Attachment 765545

Attachment 765546

Attachment 765554

Re: Rods 57
 

I have like 1 1/2 inches at the firewall.

Re: Rods 57
 

Hey another local guy!! welcome to the fun!!
That is about the sharpest looking frame I have seen. Truck is really looking good.

Re: Rods 57
 

Thanks, nice to see more guy locally out here too.

Re: Rods 57
 

Yeah, I just noticed you are from Boise too. Some of us are trying to get together at Motorfest, there is a thread in the regional section.

Re: Rods 57
 

I just saw that, my daughter is getting married the Saturday of moterfest, but i am still going.

Re: Rods 57
 

It looks like you used the stock camaro trans crossmember. Do you have any pics were you mounted it to the frame? And it looks like you moved the motor mounts rearward? How much?

Re: Rods 57
 

I will blow up the pic of the mounts for the motor. The trans you have to cut the ends off of the stock mount and then flip them. Local guy named Jay Young has done 40 of these and has it done to a science.