Parting 74 Jimmy (Blazer)
 

I will be parting this Jimmy next week. I pulled this out of the mud on a farm and it has been sitting for years. The sheet metal is bad, the rear axle is junk, and the engine is tired. I will be using the buckets and the gas tank for my project. Please respond in thread to avoid confusion.
Thanks, Ray

bare rusty tub with clean CA title on non op- $250 SOLD

top some cracks at rear pillars- $100 local SOLD

back seat needs cover- $75 local

fender emblems- $26 shipped SOLD

windshield frame- $100 plus shipping

203 transfer case- $50 local

door caps- $27 shipped pair SOLD

steering column- $30 plus shipping

Re: Parting 74 Jimmy (Blazer)
 

222

Re: Parting 74 Jimmy (Blazer)
 

333

Re: Parting 74 Jimmy (Blazer)
 

Hi Ray, I need all the top hold down hardware and the passenger side hook that the tailgate latches on. I'll post a pic of the hook in a bit. Thanks, Sharpie

Re: Parting 74 Jimmy (Blazer)
 

cargo area side panels?

Re: Parting 74 Jimmy (Blazer)
 

Ray,
not trying to second guess since you have the truck but i thought 4 speed trucks in that era had 205s behind them. i could be wrong-have been many times before-but was curious. looking at the pics, it looks like it has stock spicer hubs on it. i had a 73 K10 many years ago that actually had a turbo 350/205 combo from the factory and it had the spicer hubs.

Re: Parting 74 Jimmy (Blazer)
 

it should be a 205

Re: Parting 74 Jimmy (Blazer)
 

Sharpie, $7 shipped for the pass hook...I need to think about the top hardware-It might be needed to sell the top.
glimmertwin01, Do you need inside panels? The outside is not very good.
Much to my chagrin, it is a 203...I was surprised too! By the way, the PO sold the original axles and took "rollers" in trade.

Re: Parting 74 Jimmy (Blazer)
 

Hi Ray, no problem on the top hardware. I checked and mine is present. Just the hook then. Please PM payment info. Thanks, Sharpie

Re: Parting 74 Jimmy (Blazer)
 

Hi Ray, does this one have the fuel filler neck? Also does it have the fuel filler neck cover/hump that bolts in on the interior?

Re: Parting 74 Jimmy (Blazer)
 

I have the hump for the interior, $10 plus shipping. I might be using the filler neck along with the tank on my project.
Thanks, Ray

Re: Parting 74 Jimmy (Blazer)
 

how much for the grill center support grill mount and the outer grill brackets??

Re: Parting 74 Jimmy (Blazer)
 

Ok. I will take the hump, shipping is to 80537. I am asking about filler necks because I will also be doing a blazer tank swap in my shortbed. I am hoping the stepside filler will work since the 73-77 blazer filler necks are hard to come by.

Re: Parting 74 Jimmy (Blazer)
 

$25 plus shipping.
Thanks, Ray

Re: Parting 74 Jimmy (Blazer)
 

I'll hurry up on the step side neck and if it works, we can save on shipping by putting both in same box.
Thanks, Ray

Re: Parting 74 Jimmy (Blazer)
 

I may be interested in the door caps and the manual column if available. Let me know how much for the column.

Re: Parting 74 Jimmy (Blazer)
 

The caps and the manual column are $74 shipped to VA.
Thanks, Ray

Re: Parting 74 Jimmy (Blazer)
 

Sounds good to me Ray.
Posted via Mobile Device

Re: Parting 74 Jimmy (Blazer)
 

Woops! I found my caps and just noticed your column was non-tilt. I'm looking for a tilt manual. Sorry for the mix-up.

Re: Parting 74 Jimmy (Blazer)
 

how much would you want for just the steelies (without rubber) shipped to 28310?

<eta> or any other good (non bent) 6 lug rims you may have for that matter. I'm looking for 15"rims to put on my 6 lug 66 and are compatible with disc brakes.

Re: Parting 74 Jimmy (Blazer)
 

I'll take the jimmy fender emblems if they aren't spoken for.

Re: Parting 74 Jimmy (Blazer)
 

Also, is the grill in good shape and how much? Thanks!

Re: Parting 74 Jimmy (Blazer)
 

Does it have tailgate trim ? Pics and price if you do.

Re: Parting 74 Jimmy (Blazer)
 

Hertzdaddy- no problem

k1rodeoboater- $100 for the shipping and $80 for 4 wheels= $180 shipped

centexan- sorry grille is broken above the latch... fender emblems are yours...pm sent

SS Delux- I will check Wed.

Thanks, Ray

Re: Parting 74 Jimmy (Blazer)
 

ray the inside back side panels..or are they absent or beat up?