82 rear lower
 

I bought this truck with a rear lower kit in it and I have it as low as the kit allows , just wondering if this front lowering mount is as low as there is or is there a lower one ????? , just want the rear of this thing about an inch lower

Re: 82 rear lower
 

Has it got an axle flip kit in it? If so put a block in it. If not put a flip in it and then adjust the shackle to get it the height you want.
Jimmy

Re: 82 rear lower
 

No flip kit or that would make it easy, was trying to avoid putting one in.

Re: 82 rear lower
 

It would be your best way of getting what you want.
Jimmy

Re: 82 rear lower
 

I think he is beyond doing a flip kit.

A flip kit usually nets about 6" of drop.

His bracket lowering is usually good for 4 inches depending on manufacturers. So combine the 2, and he is on the ground.

I see only 2 options here.

1. De-arching your springs for the drop you want, and using your adjustable shackle to dial it in. First I would run the bolts down a couple of notches. That way you build in some adjustments.

2. Put the factory hangers back on, and the so a flip kit.