Parting a complete 1971 Blazer 4x4
 

AVAILABLE PARTS LIST -UPDATED: 02/11/12-
There is a lot of photos spread throughout this thread, I added more photos below, but I have over 200 photos in a photobucket album at this link: http://s213.photobucket.com/albums/c...arts%20Blazer/

There is A LOT of good parts on this Blazer and I have tried to document all of them. (including a lot of good patch pieces ranging from floor pans, to rear floor and even a few body pieces. Not to mention a complete windshield/firewall/windshield/dash and partial floor pan that is in good shape with only minor rust. The truck is now torn down to bare frame and everything is ready to buy. Let me know what you are looking for

Complete K5 Blazer, quarters and rockers are shot. Floor pans are decent except around the doors, Good frame from what I have seen. Original 307 engine with 3 speed on the column, 56,000 original miles from what I have been told. Runs and 4wd works, so transfer case should be good. Nice uncut dash, Windshield has a little fog around the edges but windshield frame is in good shape. But there is a lot of good parts and patches on this truck. let me know quick what you need. Good double wall top, minus the hatch.

The truck is located in WV, but I will bring any part you want back to NC if you are interested and live in the Charlotte area. I can also keep parts stored until Auto Fair or Good Guys in the Spring if you pay now.

Liftgate, sunvisors and rear seat are already spoken for.

Update: Rough price list is below, I have no clue how to price this stuff, so feel free to give me feedback. Many of the prices were taken from other threads, so I know I am close.

ALSO... now parting out the chassis!

1. Under Dash Speaker: $40.00 - SOLD
2. Painted Bumpers: $100.00 for both or $50.00 each - SOLD
3. Complete Doors w/ wing glass: $100 for the pair w/out inner door panels, $130 with panels-SOLD
5. Crossmembers-
6. 6 lug rally wheels: $75.00/set
7. Hubs: -
8. Upper radiator tube with end hoses: $20.00 - SOLD
9. Front and Rear Carpet hold downs: $20.00/ pair-SOLD
10. Inside Door panels: $40.00 / pair-SOLD
11. E-Brake Cables:
12. Front Seat Belts: $40.00 / pair-SOLD

12. Front Seats -SOLD
13. Front Seat Brackets/Tracks: $85.00 -SOLD
14. Proportioning Valve “L” Bracket $15.00 - SOLD
15. Transfer Case shifter $40.00-SOLD
16. Blazer Emblems: $20.00 pair-SOLD
17. Windshield Frame: $100.00-SOLD

19. Rolling chassis: $150.00

21. Front Clip Complete: $300.00-SOLD
22. 3 speed tranny: $100.00
23. Transfer Case: $100.00 -SOLD-Pending Payment

29. Taillights: $20.00 pair

32. Rear seat bolt down plates: $30.00
33. Fuel filler neck: 45.00
34. Front drive shaft: $40.00
35. Rear drive shaft: $40.00
36. Firewall: $150.00
37. Double Wall Top- minus hatch $200.00

39. Complete 307 SBC: Runs $250.00
40. Factory AM Radio: $30.00- SOLD
41. Non A/C Dash with un-cut radio hole $90.00
42. Complete Instrument Cluster: $40.00-SOLD
43. Ashtray $20.00
44. Glove Compartment Door: $40.00-SOLD-pending payment
45. Backup lights: $10.00
46. Rear Bumper brackets: $25.00-SOLD
47. Front Bumper brackets: $25.00-SOLD
48. Radiator: $40.00-SOLD
49. Radiator Shroud: $30.00-SOLD PENDING PAYMENT

51. Marker lights: $15.00 for all four

53. Heater box with hoses: $40.00
54. Non-tilt 3 speed column: $50.00
55. Rear view mirror: $10.00
56. Rear top hold down brackets: $25.00-SOLD
57. Clutch pedal assembly: $20.00
58. Brake pedal assembly : $25.00
59. Gas pedal assembly: $15.00
60. Transmission "High" Hump: $40.00-SOLD
60. Gas tank - SOLD-pending payment

http://i213.photobucket.com/albums/c...r/IMG_6829.jpg
http://i213.photobucket.com/albums/c...r/IMG_6821.jpg
http://i213.photobucket.com/albums/c...r/IMG_6834.jpg
http://i213.photobucket.com/albums/c...r/IMG_6831.jpg
http://i213.photobucket.com/albums/c...r/IMG_6810.jpg
http://i213.photobucket.com/albums/c...r/IMG_6804.jpg
http://i213.photobucket.com/albums/c...r/IMG_6808.jpg
http://i213.photobucket.com/albums/c...r/IMG_6811.jpg
http://i213.photobucket.com/albums/c...r/IMG_6789.jpg
http://i213.photobucket.com/albums/c...r/IMG_6795.jpg
http://i213.photobucket.com/albums/c...r/IMG_6798.jpg
http://i213.photobucket.com/albums/c...r/IMG_6797.jpg
http://i213.photobucket.com/albums/c...r/IMG_6793.jpg
http://i213.photobucket.com/albums/c...r/IMG_6777.jpg
http://i213.photobucket.com/albums/c...r/IMG_6741.jpg
http://i213.photobucket.com/albums/c...r/IMG_6732.jpg
both sides available
http://i213.photobucket.com/albums/c...r/IMG_6737.jpg
http://i213.photobucket.com/albums/c...r/IMG_6712.jpg
http://i213.photobucket.com/albums/c...r/IMG_6778.jpg
http://i213.photobucket.com/albums/c...r/IMG_6775.jpg
[IMG]
[/IMG]



http://i213.photobucket.com/albums/c...0/IMG_6262.jpg

http://i213.photobucket.com/albums/c...0/IMG_6267.jpg

http://i213.photobucket.com/albums/c...0/IMG_6266.jpg

http://i213.photobucket.com/albums/c...0/IMG_6264.jpg

http://i213.photobucket.com/albums/c...0/IMG_6265.jpg

http://i213.photobucket.com/albums/c...0/IMG_6269.jpg

http://i213.photobucket.com/albums/c...0/IMG_6270.jpg

http://i213.photobucket.com/albums/c...0/IMG_6271.jpg

http://i213.photobucket.com/albums/c...0/IMG_6272.jpg

http://i213.photobucket.com/albums/c...0/IMG_6275.jpg

http://i213.photobucket.com/albums/c...0/3fcd0bd6.jpg

Re: Parting a complete 1971 Blazer 4x4
 

Jeff,
How much for the bumpers? What are the wheels like, as far as rust and what size are they? Also what shape are the hubs in? I'm about an hour east of Mooresville so would be able to pick things up if I get them, would give me a chance to check out that Burb. Thanks

Re: Parting a complete 1971 Blazer 4x4
 

May also be interested in the doors, pending pics of the ruff areas and price. I'll take all I mentioned pending pricing and pics

Re: Parting a complete 1971 Blazer 4x4
 

Price of speaker under dash and upper radiator tube and both the little hoses on its end
Thanks Randy

Re: Parting a complete 1971 Blazer 4x4
 

I would be interested in front and rear carpet hold downs.

Re: Parting a complete 1971 Blazer 4x4
 

Interested in door panels? let me know shiped to 89060 nevada

Thanks,
Fred

Re: Parting a complete 1971 Blazer 4x4
 

Put me 2nd in line for the upper radiator hoses & tube

Re: Parting a complete 1971 Blazer 4x4
 

Put me down 2nd for the carpet strips. Thanks
Posted via Mobile Device

Re: Parting a complete 1971 Blazer 4x4
 

I'll be 2nd in line for the underdash radio speaker/brackets if it is an original one. Thanks, Rick.

Re: Parting a complete 1971 Blazer 4x4
 

Does the E-Brake still work? How are the cables? Im interested!

Re: Parting a complete 1971 Blazer 4x4
 

If the front seat belts are in useable shape how much, also would you sell the seat brackets and how much also interested in the sun visor brackets, shipping would be to 75402.
Thanks

Re: Parting a complete 1971 Blazer 4x4
 

How much for the bracket that holds the prop.valve to the booster? It's kind of an "L" shaped looking bracket.

Re: Parting a complete 1971 Blazer 4x4
 

T case knob and blazer emblems?

Re: Parting a complete 1971 Blazer 4x4
 

put me in line for the speaker under the dash

Re: Parting a complete 1971 Blazer 4x4
 

Can you sell me the 2 door screws with plastic angled grommet located under the vent windows? Thanks ,mike

Re: Parting a complete 1971 Blazer 4x4
 

inline for rear bumper and doors pending pics and price thanks jimmy

Re: Parting a complete 1971 Blazer 4x4
 

I've posted some pricing. I will not be able to start tearing into this thing until next week, so hopefully you are not in a rush.

Re: Parting a complete 1971 Blazer 4x4
 

I was thinking $100.00 for both of the bumpers and $200 for both doors complete without the interior door panels. As far as the hubs and rims, I saw a few ads for the wheels showing about $100 for the set, but I would like to try to sell the rolling chassis complete... so I will let you know about them.

How about $45 shipped. I will have to get you a better pic and confirm it's condition.

I will have to make sure they are there

How about $50 shipped?

I will check, but I would like to sell the rolling chassis complete, I will let you know.

I will get you pics of these and we will determine pricing from there.


How about $20 shipped?

How about $40 shipped?

I will see if they are there and get you a pic

Re: Parting a complete 1971 Blazer 4x4
 

I will take the bumpers, just let me know when your ready. No problem on the other stuff, just let me know. For the doors I will wait on the pictures. Would also be interested in the core support, pending pictures. If you plan to do the tear down here in NC, let me know maybe I could come help you.

Re: Parting a complete 1971 Blazer 4x4
 

Jeff, I'll take the upper radiator tube with both hoses for sure. I'll wait for pics of speaker and bracket. Thanks Randy

Re: Parting a complete 1971 Blazer 4x4
 

$20. sounds good for the prop. valve bracket.

I'll take it. Please send me your payment info.

Re: Parting a complete 1971 Blazer 4x4
 

Put me first in line for Radiator shroud pending : its original for 307, and no cracks, breaks, or repairs.

shipping to 79908. please send me pics via text if possible (253-495-0880)

thanks,
Mondo

Re: Parting a complete 1971 Blazer 4x4
 

That sounds fine on the t case knob and emblems. Let me know when they are off and overall condition. Thanks, Eric

Re: Parting a complete 1971 Blazer 4x4
 

Interested in the bolt down plates #32 pending pic. Are those prices shipped??

Re: Parting a complete 1971 Blazer 4x4
 

its a 4 core radiator? Or?