The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=12)
-   -   97 Tahoe body mounts (https://67-72chevytrucks.com/vboard/showthread.php?t=830326)

61_FL_Apache 01-29-2022 01:03 PM

97 Tahoe body mounts
 
Hello all, The rear driver side body mount is making noise. I tried to tighten it up, but I think the nut on the inside is spinning. Is there supposed to be a captured nut attached to the body?

Is there a way to access it from the inside of the truck?

Thanks

sntrym95 02-07-2022 12:21 PM

Re: 97 Tahoe body mounts
 
There isn't a nut that you can access, it's more like a welded nut on the mount. The weld could be broken or the bolt stripped. You should be able to see it above the fuel tank.

61_FL_Apache 02-09-2022 02:25 PM

Re: 97 Tahoe body mounts
 
Thanks for the reply Mike.
when I turn the bolt, it sounds like something spinning on the other end. There is a wire harness that goes thru a hole next to the mount. I may be able to open that a little more and see inside.

sntrym95 02-11-2022 10:12 AM

Re: 97 Tahoe body mounts
 
You should be able to get to the nut from the inside but you'll have to fold the back seat down and pull the carpet back. It looks to be right in front of the wheel well on the 4dr versions.


All times are GMT -4. The time now is 12:18 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com