|
49 Chevy 1/2 Ton Steering box question
4 Attachment(s)
Working on rebuilding the steering box on my 49. Not sure how to get the bottom bearing race and keeper off. Any one have any ideas? The keeper doesn't seem to have a way to remove it.
Thanks |
Re: 49 Chevy 1/2 Ton Steering box question
Any chance you have to pull the whole column so it disassembles and slides off the other end? Or it might just be a pressed sacrifical fit? Just a thought....I've never had one apart.
|
Re: 49 Chevy 1/2 Ton Steering box question
Does this help?
http://chevy.oldcarmanualproject.com...51ctsm0906.htm |
Re: 49 Chevy 1/2 Ton Steering box question
I bought the repair kit and it had the same pages included. What I can't figure out is how to get the end bearing off.
Shaft is disassembled, but the bearing won't come off over the worm gear. Only other way is to some how remove the conical shaped retainer on the bottom of the shaft. That is what I can't figure out. |
Re: 49 Chevy 1/2 Ton Steering box question
Edited by Moderator
Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. |
Re: 49 Chevy 1/2 Ton Steering box question
According to the manual for overhauling steering gears you twist off the collar. But you need a replacement. Is there one in the kit?
http://chevy.oldcarmanualproject.com...20mtsindex.htm http://chevy.oldcarmanualproject.com.../5220mts11.htm |
Re: 49 Chevy 1/2 Ton Steering box question
Quote:
|
| All times are GMT -4. The time now is 07:23 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com