The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Weird question (https://67-72chevytrucks.com/vboard/showthread.php?t=671360)

nateshrek 05-21-2015 08:14 PM

Weird question
 
Does anyone have pictures of where the wiring goes into the cab from the engine? And what's the grommet look like? If you haven't guessed, mine bad. And any tips to seal that up would be great.
Thanks guys.

pimpston65 05-21-2015 08:22 PM

Re: Weird question
 
Quote:

Originally Posted by nateshrek (Post 7181089)
Does anyone have pictures of where the wiring goes into the cab from the engine? And what's the grommet look like? If you haven't guessed, mine bad. And any tips to seal that up would be great.
Thanks guys.

are you talking about the main harness? the harness has a few exit points. I think the engine one is by the trans tunnel right behind the engine...

nateshrek 05-21-2015 08:25 PM

Re: Weird question
 
I have two that come in on the left side right above the fuse box. There's a really good chance it's not supposed to be there lol. That would be par for the course with this truck.

pimpston65 05-21-2015 08:29 PM

Re: Weird question
 
Quote:

Originally Posted by nateshrek (Post 7181102)
I have two that come in on the left side right above the fuse box. There's a really good chance it's not supposed to be there lol. That would be par for the course with this truck.

there should be 2, I got my new one from LMC I may have that one for you. i'll check in the am...

nateshrek 05-21-2015 08:30 PM

Re: Weird question
 
Ok thanks!

ray_mcavoy 05-21-2015 09:11 PM

Re: Weird question
 
Here's a pic of the engine harness where it goes through the firewall:

http://i175.photobucket.com/albums/w...psqvptc4vu.jpg

There is a similar looking (and slightly larger) bulkhead connector above the fuse box that has 2 plugs on the under-hood side for the generator/alternator/headlight and front parking/turn signal wiring harnesses.
The cab harness side of that connector (and grommet) looks like this when it's removed from the truck:

http://i175.photobucket.com/albums/w...psjuxfhzw3.jpg

Here's a firewall grommet set that includes both of the wiring harness bulkhead connector grommets along with some others --> http://www.classicparts.com/1960-66-...ctinfo/42-805/


All times are GMT -4. The time now is 07:55 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com