The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   SC 1984 C10 parting out* (https://67-72chevytrucks.com/vboard/showthread.php?t=382817)

Stitch 01-24-2010 10:19 AM

1984 C10 parting out*
 
I'm parting my Dad's truck...it got hit in the front end and bent the frame alittle, so we're parting it out...

It's an 84 2wd lwb...I'll post some general part prices and post lots of pics...if you see anything I don't price, please ask about it...everything on this truck is for sale except the motor and transmission...there is NO RUST anywhere on the body of this truck...ALL of the panels are pretty straight except for the driver's fender and driver's door...so here's the price list...all prices do not include shipping...Big items are pickup only...I am located in Sumter, SC zip code 29040 so yall can kind of figure out what shipping would be if you'd like...

Pass Door w/ power guts and glass only...$100 pickup only
Hood...$50 pickup only
Hood hinges...$20
SBC motor stands and motor mounts…$30
Harness holder on firewall…$10
Cowl panel...$15
Cruise Control system minus switch on column...$100
Washer fluid bottle…no leaks...$15
Wiper arms...$5
Wiper rod assembly inside cowl…$20
Front suspension, spindles, rotors, and calipers…$200
Master cylinder...$25
Power brake booster…$25
Proportioning valve...$20
Inner fenders...$20 ea. pickup only
Bottle jack w/crank, lug wrench, hold down and hardware...$25
Headlight surround...$10 set
4 Headlight Core support...$35 pickup only
4 Headlight Wire Harness...$25
Grill...$35
Grill surround chrome...$30
Horns...$10 set
Pass. fender...$50 pickup only
Driver's fender...dented...see pictures$20 pickup only
Front side markers...$10 set
Bed w/o tailgate...$300 pickup only
Tailgate...$90 pickup only
Stake pocket tie downs...$10 set of 2
Gas doors...$10 each
Pass taillight...$5
Wheel opening trim...$20 set
Wagon Wheels w/o tires...$150 pickup only
Center caps...$50 set
Gas tank lwb...$50
Tank brackets...$30 set
Rear bumper...$50 pickup only
Trailer wiring...New...$10...Used...$5
Power window and power lock harness under dash...$20
Gas pedal assembly…$10
Accelerator cable…$5
Brake pedal assembly…$10
Emergency brake pedal assembly…$10
Inner door handle bezel...$5 set
Inside door handles...$10 set
Outside door handles...$20 set
Under dash harness w/ fuse box...$30
A/C Heater box w/all ducts...$100
Glove box latch...$5
under column plastic...$5
under column silver metal...$5
Factory dash speakers and mounts...$5 set
Steering wheel...$20
Horn button...$5
Extra Temperature gauge…C to H scale…$5
Cab corner speakers w/mounts...$25
Rear Cab wall panel...$15
Driver side kick panel...$10
Door sills...$20
A/C control...$25
Headlight switch w/knob and nut...$10
Brake light switches...$5 ea.
Sun visors...$20
Dome light w/harness...$20
Rear view mirror...$10
Defroster vents for dash…$10 set
1984 Owner's Manual...excellent cond...$15

NOT Available:

Power steering box
Passenger side gas tank
Complete door panels
Bench seat
Tilt column
Shift indicator
Passenger kick panel
Headliner trim
Seat belts
Factory AM/FM tape radio
Door locks
Drive shaft
Engine Harness
Silver painted gauge bezel
Gauge cluster
A/C Dash trim w/emblem
Master cylinder brake lines
Stripped A/C Cab and clean title
Rear slider window
Door vent visors

Stitch 01-24-2010 10:21 AM

Re: 1984 C10 parting out
 
5 Attachment(s)
pics...

Stitch 01-24-2010 10:23 AM

Re: 1984 C10 parting out
 
5 Attachment(s)
more pics...

Stitch 01-24-2010 10:24 AM

Re: 1984 C10 parting out
 
5 Attachment(s)
...

Stitch 01-24-2010 10:25 AM

Re: 1984 C10 parting out
 
5 Attachment(s)
pics...

Stitch 01-24-2010 10:25 AM

Re: 1984 C10 parting out
 
2 Attachment(s)
more...

joe231 01-24-2010 02:44 PM

Re: 1984 C10 parting out*
 
how much for the B-pillar trim shipped to 73071?

kenm78 01-24-2010 03:55 PM

Re: 1984 C10 parting out*
 
How much for the Tilt column with cruise and int. wipers shipped to 73020?

Stitch 01-24-2010 04:26 PM

Re: 1984 C10 parting out*
 
Quote:

Originally Posted by joe231 (Post 3753793)
how much for the B-pillar trim shipped to 73071?

$15 + shipping sound good? Let me get them out and get a qoute on shipping...

Chuck.

Stitch 01-24-2010 04:26 PM

Re: 1984 C10 parting out*
 
Quote:

Originally Posted by kenm78 (Post 3753949)
How much for the Tilt column with cruise and int. wipers shipped to 73020?

Let me get it out of the truck and get a shipping qoute and I'll get back to ya...thanks...

Chuck.

joejbal 01-24-2010 04:31 PM

Re: 1984 C10 parting out*
 
interested in the steering box for my 68 c-10

Stitch 01-24-2010 04:38 PM

Re: 1984 C10 parting out*
 
Quote:

Originally Posted by joejbal (Post 3754001)
interested in the steering box for my 68 c-10

let me get it out...I need your zipcode and I can get a shipping quote...

$30 plus shipping...thanks

Chuck.

Acme Racer 01-24-2010 05:15 PM

Re: 1984 C10 parting out*
 
Where are ya located??? Thanks!

Big Port Jimmy 6 01-24-2010 05:53 PM

Re: 1984 C10 parting out*
 
I will take the seatbelts. Jay

Big Port Jimmy 6 01-24-2010 05:59 PM

Re: 1984 C10 parting out*
 
How are the wheel well moldings? Jay

joe231 01-24-2010 06:06 PM

Re: 1984 C10 parting out*
 
Quote:

Originally Posted by Fat Hoe (Post 3753993)
$15 + shipping sound good? Let me get them out and get a qoute on shipping...

Chuck.

cool, yeah let me know on the shipping

kenm78 01-24-2010 07:34 PM

Re: 1984 C10 parting out*
 
Quote:

Originally Posted by Fat Hoe (Post 3753995)
Let me get it out of the truck and get a shipping qoute and I'll get back to ya...thanks...

Chuck.

Sure, Just let me know.

Stitch 01-24-2010 07:48 PM

Re: 1984 C10 parting out*
 
Quote:

Originally Posted by Big Port Jimmy 6 (Post 3754150)
I will take the seatbelts. Jay

Quote:

Originally Posted by Big Port Jimmy 6 (Post 3754166)
How are the wheel well moldings? Jay

pm sent

Stitch 01-24-2010 07:52 PM

Re: 1984 C10 parting out*
 
Quote:

Originally Posted by Acme Racer (Post 3754087)
Where are ya located??? Thanks!

I'm in Sumter, SC zip code 29040

joejbal 01-25-2010 09:17 AM

Re: 1984 C10 parting out*
 
zip is 07719. need the pitman arm and rag joint. let me know what the shipping is. will it fit in a standard usps box? it might

Stitch 01-25-2010 12:33 PM

Re: 1984 C10 parting out*
 
Quote:

Originally Posted by joejbal (Post 3755629)
zip is 07719. need the pitman arm and rag joint. let me know what the shipping is. will it fit in a standard usps box? it might

I'll check out usps and see what I can do...I will be removing the big heavy parts off the truck this weekend...thanks

ocbaud 01-25-2010 01:41 PM

Re: 1984 C10 parting out*
 
i need the vent door for the passanger side and kick panel.

basically anything involving the passagner side kickpanel and the vent door.


like this:

http://i259.photobucket.com/albums/h...D/DSC00179.jpg


very interested. thanks


all the parts that are missing from this picture:
http://farm5.static.flickr.com/4029/...54b407bb_o.jpg

:-)

87Bob 01-25-2010 05:40 PM

Re: 1984 C10 parting out*
 
What kind of shape is the right fuel tank in? I have a 85LWB with the left tank only. I have a set of brackets for the right tank and the right fill door assembly but I need the following.

Right tank.
filler neck
fuel lines to the both tanks
Switch over valve
Harness for the fuel tanks
dash switch.

Oh and I sent you a PM on the radio. I'd have you ship me the radio and I have a daughter and family in Charlotte that I'd makes arangements for the balance. Let me know

dammitmitchell 01-25-2010 06:59 PM

Re: 1984 C10 parting out*
 
just a quick comment

this is by far the MOST COMPLETE listing for a "parts truck" sale ive seen so far.. i wish this was avail last summer when i was doing everything...

good luck and good job

Stitch 01-25-2010 08:00 PM

Re: 1984 C10 parting out*
 
Quote:

Originally Posted by 87Bob (Post 3756560)
What kind of shape is the right fuel tank in? I have a 85LWB with the left tank only. I have a set of brackets for the right tank and the right fill door assembly but I need the following.

Right tank.
filler neck
fuel lines to the both tanks
Switch over valve
Harness for the fuel tanks
dash switch.

Oh and I sent you a PM on the radio. I'd have you ship me the radio and I have a daughter and family in Charlotte that I'd makes arangements for the balance. Let me know

I sent you a pm back on the radio...

about the fuel tank on the pass side...basically you want everything from the fuel system except the fuel line from the carb to the switching valve, the fuel line from the switching valve to the driver's tank, and the driver's tank...am I correct in this? if so, this weekend I'm taking all the big heavy parts off and I'll get everything you want off and post some pics for you...I asked my dad and he said that both tanks held gas and both tanks worked through the switch and the fuel gauge read both tanks...so the dual tank system worked perfect...thanks man...

Chuck.


All times are GMT -4. The time now is 08:18 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com