More pictures of my new '67 C20
 

True to his word, the guy I bought it from delivered it to me last night. It's certainly not without it's problems, but I'm pretty happy with it.

First the bad. The cab floor and bed wood is shot:

http://i3.photobucket.com/albums/y55...psiqpzbvog.jpg

http://i3.photobucket.com/albums/y55...pscimbrrtg.jpg

But the rockers have been changed already, and he gave me a floor pan kit that he had bought:

http://i3.photobucket.com/albums/y55...pswc17mqlv.jpg

The driver's side cab corner looks solid, but the right side will need replaced, along with the cab support. Didn't get a picture of that, I guess.

Now the good. Straight and mostly rust-free:

http://i3.photobucket.com/albums/y55...pskavwzsak.jpg

Looks like a little bondo at the back of the bedside:

http://i3.photobucket.com/albums/y55...psf9gs43zj.jpg

Not sure if it's correct, but it has a tow hook on the passenger side:

http://i3.photobucket.com/albums/y55...pszuwbh5cd.jpg

Brand new aluminum radiator:

http://i3.photobucket.com/albums/y55...pspy4vztho.jpg

More to come...

Re: More pictures of my new '67 C20
 

...More. This is supposed to be a 327. I haven't ran the numbers yet, but it looks like it certainly could be. The stamped numbers are V0920YH:

http://i3.photobucket.com/albums/y55...psx0sull6y.jpg

Still has the restraint cables for a broken motor mount:

http://i3.photobucket.com/albums/y55...pspcppdmle.jpg

Both sides:

http://i3.photobucket.com/albums/y55...psji6sokgl.jpg

Not sure what kind of carb this is. Rochester, I suppose. The number on the rebuild tag is 7027125. It's allegedly the only thing keeping the engine from running. I have a good 4Bbl here to swap on and see:

http://i3.photobucket.com/albums/y55...psv0uvdlwl.jpg

I need to find out what rear end this is, too:

http://i3.photobucket.com/albums/y55...psfehot7bm.jpg

http://i3.photobucket.com/albums/y55...pslmhgrn7q.jpg

Anyway, that's pretty much it. I don't have the time or money to do anything with it this year, but long range plans are to make it safe and sound and maybe use it for either a camper (since it's a camper special) or pull a trailer. Probably dump the V8 for a six, because I like them better. Maybe some kind of O-drive. We'll just have to see what happens.:lol:

Re: More pictures of my new '67 C20
 

looks like a good start, also looks better than the one i drive!!

Re: More pictures of my new '67 C20
 

That's an Eaton HO52 rear end.

Re: More pictures of my new '67 C20
 

Looks like a good start to me. Congratulations to you and the truck. You got a new truck. Truck got his life saved. :metal:

Re: More pictures of my new '67 C20
 

nice project!! nothing like having a good ole truck to work on.keep sending pics of your progress.

Re: More pictures of my new '67 C20
 

As near as I can tell, it has the original engine. At least the YH on the stamped numbers means it's a '67 327. The carb I didn't recognize is a Rochester 4G (4 jet). The PO, who seemed to know his stuff, said that it must have been early in the production run because these carbs were leftovers from '66. I don't know if that's true, but it's a Janesville truck and the VIN would indicate that it was number 4977 off the line. The SPID is missing, so it's no help. I gave a cursory look for the build sheet, but I didn't see it anywhere. I'll have to pull the seat out and see if it's hiding somewhere.

Re: More pictures of my new '67 C20
 

That's a good truck. Probably a TH400 and the HO52 is probably 4.10. Is it a Custom model? I spy the fancy door panel

Re: More pictures of my new '67 C20
 

Very nice truck! well worth some time and money!!! Enjoy. FYI if you go to replace the 4-jet with another carb, beware the 4-jets are straight bore the intake will not accept a spread bore carb. without using an adapter !!

Re: More pictures of my new '67 C20
 

Sure enough, TH400 and Custom. I might just go ahead and rebuild the carb so I can at least see what works and what don't.

Re: More pictures of my new '67 C20
 

Nice find.

Re: More pictures of my new '67 C20
 

if you get rid of the engine id sure be interested for my 67. i had that same carb on a '65 283

Re: More pictures of my new '67 C20
 

from my understanding 67 was the last year for the 4 jet. i was looking for one till i decided to bbc mine.

looks like a great truck too work with. go over those brakes real good fire it up and go cruise

i'd say that ps side mm is a lil' off:lol:

Re: More pictures of my new '67 C20
 

Haw! I hadn't really noticed that until I looked closer at the picture. Maybe it's a good thing the cables were in place!:lol:

Re: More pictures of my new '67 C20
 

Yep, 68s had Q-jet. That 4-jet was a good carb, but I'm a fool for that spread bore, a very great idea.

Re: More pictures of my new '67 C20
 

The 4 jet is a small carb , I think 500 cfm , I have a 65 327 that has the same carb
from the looks of your bed sides there were hooks at one time on the side , aka camper special

Re: More pictures of my new '67 C20
 

Neat ol truck. Got alot of potential. Congrats!!