Might as well call it a project: Pawpaw's S10
2 Attachment(s)
Or one of the many he owned. I bought this one from him not long before he passed. Since it has been thru mine and both of my son's hands. Now it's back in mine and I am in the process of turning it into a semi-daily driver. Just learned the hard way that they don't repro flywheel bolts for this truck, had to pull a transmission in the pull a part to get the bolts. Replaced the alternator, u-joints and rear wheel bearings and seals. I rebuilt the front end about 5 years ago (got 25k miles on it) and just put a minor lift to clear 16" rims and all terrains. Plans are to redo the interior, fix the a/c and maybe vinyl rap it, although I do dig the clown show paint.
|
Re: Might as well call it a project: Pawpaw's S10
Found a couple of square body S10s at pullapart and score door panels, a bench seat (the one in it is my son's) and some miscellaneous interior stuff. Ordered the stuff to replace all the window and door seals from LMC and a vinyl floor mat from somewhere else, can't remember where.
|
Re: Might as well call it a project: Pawpaw's S10
I need to get the window seals for mine so the windows stop falling over.
|
Re: Might as well call it a project: Pawpaw's S10
Quote:
Guess I get started after work tomorrow with the floor, since the mat arrived today. I ordered it Friday and got the confirmation email yesterday. When I left the house to go to work tonight it was on the porch. |
Re: Might as well call it a project: Pawpaw's S10
BTW the mat came from Raybuck Auto Body Parts, I'll give a review on it once it's in.
|
Re: Might as well call it a project: Pawpaw's S10
I'm guessing it replaces the carpet?
|
Re: Might as well call it a project: Pawpaw's S10
Quote:
|
Re: Might as well call it a project: Pawpaw's S10
1 Attachment(s)
Hopefully your floor doesn't look like mine did.
|
Re: Might as well call it a project: Pawpaw's S10
Here's hoping.
|
Re: Might as well call it a project: Pawpaw's S10
2 Attachment(s)
Starting point for insulating the floor and installing vinyl floor mat. Little surface rust, gonna hit with rust converter and cover up.
|
Re: Might as well call it a project: Pawpaw's S10
2 Attachment(s)
Got the floor cleaned up and put down some Lowes asphalt backed aluminum tape.
|
Re: Might as well call it a project: Pawpaw's S10
Looks like progress to me.
Nice way to spend the day. |
Re: Might as well call it a project: Pawpaw's S10
I'm thrilling my wife by using her dining room to warm the vinyl floor.:D
|
Re: Might as well call it a project: Pawpaw's S10
1 Attachment(s)
New parts
|
Re: Might as well call it a project: Pawpaw's S10
2 Attachment(s)
Some of why I am doing this.
|
Re: Might as well call it a project: Pawpaw's S10
5 Attachment(s)
Progress, the shifter was a pita.
|
Re: Might as well call it a project: Pawpaw's S10
Stopping point today was a stuck roller on the driver's side regulator. Fix that tomorrow and turn some tan plastic gray.
|
Re: Might as well call it a project: Pawpaw's S10
5 Attachment(s)
Done for now. Today's pictures.
|
Re: Might as well call it a project: Pawpaw's S10
2 Attachment(s)
Junkyard score, gray dash. Standard tilt column with cruise control setup and delay wiper motor. $100
|
Re: Might as well call it a project: Pawpaw's S10
That was a steal.
|
Re: Might as well call it a project: Pawpaw's S10
1 Attachment(s)
Quote:
Old dash out in prep to install new one. Got a few wiring repairs tp do and figure out the cruise setup. Got a week to get it back together while I wait on some injectors I ordered to come in. Tuned it up because of crappy gas mileage and it started surging. Thought it might be vacuum related but it turned out to be an injector leaking through. |
Re: Might as well call it a project: Pawpaw's S10
Got it back on the streets?
|
All times are GMT -4. The time now is 05:08 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com