Re: 1950 Chevy 3600 - Bumper Punchin'
 

thanks man. that's exactly what i needed. Now i don't have to stress about it. got similar documentation for the rear?

Re: 1950 Chevy 3600 - Bumper Punchin'
 

SUBSCRIBED!!!!

Dang Levi, I had no idea you had got your mitts on a clean little 3600! Now I HAVE to make a road trip to Iowa!!

Re: 1950 Chevy 3600 - Bumper Punchin'
 

:D

http://www.heidts.com/index.cfm/page...=cat/cat95.htm

Re: 1950 Chevy 3600 - Bumper Punchin'
 

subscribed...

Re: 1950 Chevy 3600 - Bumper Punchin'
 

you, my friend, are a Rawk Star!

http://media3.guzer.com/pictures/rock_star_cat.jpg

Re: 1950 Chevy 3600 - Bumper Punchin'
 

any time man. I bet i can even find something for you to do around here :)

btw, i was going to ask you if you got your seat cover (is is just a blanket?) thing from anywhere special. I think it would look good in this old beast.

Re: 1950 Chevy 3600 - Bumper Punchin'
 

Man when we loaded it I thought it was complete !! Looks like it fell apart when you unloaded it !!!:lol::lol::lol: J/K makin' better progress than me ;) Bob

Re: 1950 Chevy 3600 - Bumper Punchin'
 

:lol:, I've got a soft spot for this year model......

Re: 1950 Chevy 3600 - Bumper Punchin'
 

Levi,
.....head on over to Ebay, type up sarape and there you go! I was able to scvore two of them for a little under $30.

I used hog rings to keep them from going anywhere.

and yes, a nice little Mexican blanket action would look right at home in there!!!!!

Re: 1950 Chevy 3600 - Bumper Punchin'
 

Those colors will look killer in that thing... :ito:

Re: 1950 Chevy 3600 - Bumper Punchin'
 

ya know..i wasn't going to say nothing but since bob did i have to...

i think this truck is trying to mock Fords, cause they are so good at falling apart!! lol sorry, had too

Re: 1950 Chevy 3600 - Bumper Punchin'
 

Better keep after it I'm starting to catch up !!! I'm sure your's will be driving long before mine though ;) Bob

Re: 1950 Chevy 3600 - Bumper Punchin'
 

i'm having some issues getting my steering column out. go check this thread for details and pics:

http://67-72chevytrucks.com/vboard/s...d.php?t=331949

Re: 1950 Chevy 3600 - Bumper Punchin'
 

I don't have a clue !!!

Re: 1950 Chevy 3600 - Bumper Punchin'
 

not sure, but i was looking at the 48 i just bought and it almost looks as if it was just pressed on there i saw no set screws or anything on mine levi.

Re: 1950 Chevy 3600 - Bumper Punchin'
 

hmmm, well this may be a bit of a problem until i get a torch then. not that big of a deal though. I have plenty to do for now.

Re: 1950 Chevy 3600 - Bumper Punchin'
 

wait?! you picked up a '48?? where's the build thread man? :)

Re: 1950 Chevy 3600 - Bumper Punchin'
 

ill be getting there. i bought it about 2 days ago from a junk yard. it was about 2 seconds away from the car crusher and i couldnt let that happen. i dont plan to do much of anything with it right now aside from trying to see if i can get hte inline 6 to run, other than that down the road i may pick up an s10 frame from the salvage yard i work at and convert it to that and bag it. s10 frames can be bagged fairly cheap.

Re: 1950 Chevy 3600 - Bumper Punchin'
 

Very cool cant wait to see another one of your build threads..

Re: 1950 Chevy 3600 - Bumper Punchin'
 

Very nice project you have there.

Re: 1950 Chevy 3600 - Bumper Punchin'
 

Awesome build. My son's '67 long-step (remember from last summer's meet) wasn't going to be started this summer due to finances, but you've got me inspired to start it anyway !! I can do the cleaning, painting, & bodywork for not much money...

He's leaning towards the new camaro color "Hugger Orange Pearl" along with the factory white or maybe white-pearl. What do you think ??

http://image.motortrend.com/f/future...ront_right.jpg

Re: 1950 Chevy 3600 - Bumper Punchin'
 

i think that color would be badass on a 67. The factory white sounds better to me, but pearl might look good too.

Re: 1950 Chevy 3600 - Bumper Punchin'
 

ok, i got a lot more done tonight than i had expected. thanks to my buddy matt who showed up around 7:30. by about 10 we had the rear end nearly out. Unfortunately my wife works tomorrow, so we had to stop hammering and grinding. But on a good note, she works, so i get all day in the garage to myself.

Here's a pic of where we ended up. The only thing holding the rear in is the drive shaft. The damn U-joint is rusted in place, but a good few whacks with the hammer should take care of that. If not, the cut off wheel is coming out and the driveshaft will get cut.

http://www.IvelDesigns.com/__Downloa..._rearend/1.jpg

Today at work i drew out some plans for the trans X member I plan to build. This is draft 1, and i already have some changes i'm going to make. it will be made form 2"x3"x.25" tube, but i'm going to lay it on its side, and am going to blot it to the side and bottom of the frame instead of the top and bottom. That way I have more room for exhaust.

Oh, and i found steel shop today. Going to get 2 bars of .125"x6"x20' for boxing the frame and then a 24' stick of 2"x3"x.25" for the X member and some other stuff I planned.

http://www.IvelDesigns.com/__Downloa..._rearend/2.jpg

Re: 1950 Chevy 3600 - Bumper Punchin'
 

and bosses wonder why our productivity is so down!!!! must be because we're all day dreaming about rusty trucks?!

Re: 1950 Chevy 3600 - Bumper Punchin'
 

mid-day break...

the rear is out, all un-needed brackets are removed and an un-needed crossmember. I think over the last 18 hours i've ground and punched out 30+ rivets. i think i'm about done with rivets now. uhg, wait, i have to do the trans xmember yet....

anyways. I also repaired one of the rear braces for the running boards. It was cracked, so i ground it down and welded it up. I only have flux core wire right now, but after a quick grind it doesn't look bad. I need to do the same on the other side too.

I'll post pics later tonight.