The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   WA WTB 1970 SBC Alternator Brkts, pulleys, and... (https://67-72chevytrucks.com/vboard/showthread.php?t=512457)

wesmigletz 03-04-2012 02:52 PM

WTB 1970 SBC Alternator Brkts, pulleys, and...
 
I recently picked-up a 1970 Blazer. It has a bastardized LWP/brkt and pulley set-up.

I'm looking for the correct alternator brackets, crank and water pump pulleys, and depending on shipping may be interested in stock valve covers, dip stick and tube, air cleaner, oil fill, etc.

Once I get the parts, I'm gonna install a SWP, and get both the alternator and PS working, and hoping to clean the engine bay up a bit.

Shipping will be to 98499 in Lakewood, Wa.

Thanks,

Wes

WETOWM 03-04-2012 03:47 PM

Re: WTB 1970 SBC Alternator Brkts, pulleys, and...
 
I have the alt brackets pulleys and a good short waterpump all off a 71 same as 70 also i have the air cleaner & tube off the 71 not sure if 70 & 71 are the same on the air cleaner ?

wesmigletz 03-04-2012 03:55 PM

Re: WTB 1970 SBC Alternator Brkts, pulleys, and...
 
Quote:

Originally Posted by WETOWM (Post 5229748)
I have the alt brackets pulleys and a good short waterpump all off a 71 same as 70 also i have the air cleaner & tube off the 71 not sure if 70 & 71 are the same on the air cleaner ?

I'm interested in the brackets and pulleys. I will see what I can find out about the aircleaner being the same for 1970 and 71.

Wes

PICKMUP 03-04-2012 04:50 PM

Re: WTB 1970 SBC Alternator Brkts, pulleys, and...
 
1 Attachment(s)
Stop by, I am in Olympia and have everything you need...new & used.
I even give a military discount.
Send me an email and I will give you directions & a Parts List to look at before you stop by...frank

wesmigletz 03-04-2012 09:24 PM

Re: WTB 1970 SBC Alternator Brkts, pulleys, and...
 
I met with Frank today. was able to get the parts I needed. WETOWM, thanks for the offer, but I am all set for now.

Frank, it was great meeting you. I'll be keeping in touch.


All times are GMT -4. The time now is 09:26 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com