The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 1 of 4 1 234
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   VA Parting out 87 GMC shortbed (https://67-72chevytrucks.com/vboard/showthread.php?t=791728)

Gargoyle 08-11-2019 09:51 PM
Parting out 87 GMC shortbed
 
2 Attachment(s)
Thus truck has some good body parts and a complete drivetrain.

Front clip (hood, outer fenders, rad support) $300

Doors SOLD

Solid tailgate with some dents SOLD

Front bumper braces $25/pair

Dash bezel, SOLD

Glove box, $15

Ashtray with lighter, $10

Gas filler door, $10 plus shipping

Tan Visors, $15\pair plus shipping

Post in thread if you want anything not listed. Will be sending the carcass to the scrap yard shortly.

Gargoyle 08-11-2019 09:55 PM
Re: Parting out 87 GMC shortbed
 
Pics

cst204x4 08-12-2019 10:30 PM
Re: Parting out 87 GMC shortbed
 
More pics? Interior?

Gargoyle 08-13-2019 07:58 AM
Re: Parting out 87 GMC shortbed
 
1 Attachment(s)
Tan bench seat in fair condition, SOLD

Tan seat belts in fair condition, $15. SOLD

Gargoyle 08-13-2019 08:00 AM
Re: Parting out 87 GMC shortbed
 
1 Attachment(s)
More pics

Gargoyle 08-13-2019 08:02 AM
Re: Parting out 87 GMC shortbed
 
1 Attachment(s)
More

Gargoyle 08-13-2019 08:18 AM
Re: Parting out 87 GMC shortbed
 
3 Attachment(s)
Pics

favor 08-13-2019 09:17 AM
Re: Parting out 87 GMC shortbed
 
I'll take seatbelts

TBohne 08-13-2019 12:41 PM
Re: Parting out 87 GMC shortbed
 
air cleaner, all pulleys and all brackets off the engine (alternator, a/c compressor, power steering pump, carburetor accelerator bracket, etc.).

Gargoyle 08-13-2019 01:54 PM
Re: Parting out 87 GMC shortbed
 
Quote:
Originally Posted by TBohne (Post 8575536)
air cleaner, all pulleys and all brackets off the engine (alternator, a/c compressor, power steering pump, carburetor accelerator bracket, etc.).
TBohne, give me a couple days to pull everything and I'll get back to you.

Thanks

85X3 08-13-2019 04:47 PM
Re: Parting out 87 GMC shortbed
 
Both lower control arms shipped to MI? $$?
Under hood wire harness any good?

DPowers 08-13-2019 06:54 PM
Re: Parting out 87 GMC shortbed
 
Interested in inner door panels, windshield washer jug if have one.

Gargoyle 08-13-2019 08:38 PM
Re: Parting out 87 GMC shortbed
 
Quote:
Originally Posted by DPowers (Post 8575756)
Interested in inner door panels, windshield washer jug if have one.
The passenger side door panel has been cut somewhat around the door handle, I'll get a pic if you're interested. Washer jug is there but need to look for condition.

Gargoyle 08-13-2019 08:42 PM
Re: Parting out 87 GMC shortbed
 
Quote:
Originally Posted by 85X3 (Post 8575669)
Both lower control arms shipped to MI? $$?
Under hood wire harness any good?
Don't know about the harness, I've never had a battery installed. Will have to check out the lower control arms.

DPowers 08-13-2019 10:09 PM
Re: Parting out 87 GMC shortbed
 
Quote:
Originally Posted by Gargoyle (Post 8575813)
The passenger side door panel has been cut somewhat around the door handle, I'll get a pic if you're interested. Washer jug is there but need to look for condition.
Yes please

favor 08-17-2019 09:25 AM
Re: Parting out 87 GMC shortbed
 
Did ya get a shipping price on seatbelts ? Thanks

csa daddy 08-18-2019 01:52 PM
Re: Parting out 87 GMC shortbed
 
How much for the frame or atelast middle of cab at trans mount back

Gargoyle 08-19-2019 08:15 AM
Re: Parting out 87 GMC shortbed
 
Quote:
Originally Posted by favor (Post 8577516)
Did ya get a shipping price on seatbelts ? Thanks
USPS priority looks like the best price, PM sent

Quote:
Originally Posted by csa daddy (Post 8578129)
How much for the frame or atelast middle of cab at trans mount back
Not quite at that point yet but might be able to work something out. Have a couple people interested in a roller with the cab and bed included.

Gargoyle 08-19-2019 08:24 AM
Re: Parting out 87 GMC shortbed
 
Quote:
Originally Posted by TBohne (Post 8575536)
air cleaner, all pulleys and all brackets off the engine (alternator, a/c compressor, power steering pump, carburetor accelerator bracket, etc.).
PM sent

csa daddy 08-19-2019 10:38 PM
Re: Parting out 87 GMC shortbed
 
Quote:
Originally Posted by Gargoyle (Post 8578495)
USPS priority looks like the best price, PM sent



Not quite at that point yet but might be able to work something out. Have a couple people interested in a roller with the cab and bed included.
Just let me know what you come up with

favor 08-21-2019 11:24 AM
Re: Parting out 87 GMC shortbed
 
Payment sent. Thanks for being honest.I really appreciate your time and efforts

Gargoyle 08-26-2019 12:47 PM
Re: Parting out 87 GMC shortbed
 
1 Attachment(s)
Quote:
Originally Posted by TBohne (Post 8575536)
air cleaner, all pulleys and all brackets off the engine (alternator, a/c compressor, power steering pump, carburetor accelerator bracket, etc.).
Here's a pic:

Quote:
Originally Posted by favor (Post 8579696)
Payment sent. Thanks for being honest.I really appreciate your time and efforts
Parts shipped, thanks!

favor 08-28-2019 07:20 AM
Re: Parting out 87 GMC shortbed
 
Received seat belts- very pleased Thanks again

Gargoyle 08-30-2019 07:42 AM
Re: Parting out 87 GMC shortbed
 
All brackets and pulleys are sold.

Solid cab that has a dent in the roof on the driver side, drip rails have been shaved. No title, $125

Short bed that needs some work but is fairly solid overall, inside of bed is straight and solid. SOLD

Gargoyle 09-02-2019 01:18 PM
Re: Parting out 87 GMC shortbed
 
Dash bezel, SOLD
Glove box, $15
Ashtray with lighter, $10


All times are GMT -4. The time now is 07:10 PM.
Page 1 of 4 1 234
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com