PTFE AN6 Fuel hose bundle deal
4 Attachment(s)
Hi Folks;
This forum has been a big help while building my 1980 C10, this build is what caused this business to be created as I was trying to find fuel line to install my FiTech fuel injection and found it to be a big PITA. I thought I can do better so I got in touch with a ton of manufacturers and got samples. Did a ton of testing and found the best one to go to market. You can check out my Build Thread here. As a thank you to this Forum as one of the groups who helped me so much through my project I have created a promo code just for you guys. CHEVYTRUCK10 We have on promo right now 20FT of PTFE stainless or Nylon braided line. As well as 8 fittings of your choice - Choose from - Straight, 45, 90, and 180 degree fittings. Default fitting choice is 2 of each fitting. 2 - straight, 2 45, 2 90, and 2 180 degree AN6 fittings Perfect for Fitech or Sniper installs. LS swaps, Carbed applications. Very good chemical resistance compared to rubber lined hose. 114.97 for the AN6 AN8 also available $139.97 Free Shipping on ALL ORDERS www.hotrodfuelhose.com :metal::metal::metal::metal::metal::metal: Thanks Justin |
Re: PTFE AN6 Fuel hose bundle deal
Are you going to get black fittings?
|
Re: PTFE AN6 Fuel hose bundle deal
Quote:
|
Re: PTFE AN6 Fuel hose bundle deal
Justin,
Do you have kits for the Holley Sniper EFI with return to tank? I am using a 69 Camaro gas tank also by Holley with fuel pump and sender. I am installing the system in a 69 C/10 SWB. If so please Quote. Thanks, Wally |
Re: PTFE AN6 Fuel hose bundle deal
1 Attachment(s)
Quote:
|
Re: PTFE AN6 Fuel hose bundle deal
Justin,
Do you have that hardline too? |
Re: PTFE AN6 Fuel hose bundle deal
Quote:
|
Re: PTFE AN6 Fuel hose bundle deal
Justine,
Thanks I will get it ordered this weekend. Thanks for your time. Wally |
Re: PTFE AN6 Fuel hose bundle deal
Quote:
|
Re: PTFE AN6 Fuel hose bundle deal
Justin,
Would you happen to know the part numbers by chance? |
Re: PTFE AN6 Fuel hose bundle deal
Quote:
Part#: EAR-165056ERL Item: ALUM TUBE ADPT -6 MALE AN TO 5 Part#: SUM-2200077 Item: -6-3/8 MALE HARDTUBE FITTING Obviously make sure your sending unit is 3/8 feed 5/16 return for these ones. |
Re: PTFE AN6 Fuel hose bundle deal
Thanks, I will be ordering the EFI system this weekend also. Appreciate you help.
|
Re: PTFE AN6 Fuel hose bundle deal
Kit on order Thanks.
|
Re: PTFE AN6 Fuel hose bundle deal
Quote:
If anyone else is looking for the Black nylon braided PTFE hose in the AN6 size I currently only have 2 bundles left. Justin |
Re: PTFE AN6 Fuel hose bundle deal
Thanks hope it wasn't too bad. It will be awhile before I get installed. I will be breaking in engine with carburetor, after that I will send you some pictutes.
Wally |
Re: PTFE AN6 Fuel hose bundle deal
Quote:
|
Re: PTFE AN6 Fuel hose bundle deal
AN6 straight fittings are currently SOLD OUT. We will be getting more but without the straight fittings the bundle is unavailable as well.
If you would like a Bundle with 45/90/180 degree fittings we can still make that work but you must message directly as the website will not process the order. AN8 is still available Thanks. |
Re: PTFE AN6 Fuel hose bundle deal
When will more straights be available?
|
Re: PTFE AN6 Fuel hose bundle deal
Shortly. I actually have 2 left as another customer chose to go with 45s instead. I can make one bundle work.
Let me know. |
Re: PTFE AN6 Fuel hose bundle deal
1 Attachment(s)
Quote:
Black hose will be restocked next week. Black fittings with stainless hose is currently available. |
Re: PTFE AN6 Fuel hose bundle deal
Pm sent
|
Re: PTFE AN6 Fuel hose bundle deal
Quote:
|
Re: PTFE AN6 Fuel hose bundle deal
1 Attachment(s)
Quote:
https://hotrodfuelhose.com/collectio...-fittings-save |
All times are GMT -4. The time now is 11:16 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com