Re: My 64 C-10 fleetside shortbed build
 

Just a small update. pretty boring stuff, I welded up some holes someone drilled in the kickpanel, one on the back of the cab, and a few more here and there. I did try out Alans trick welding a nut on the inside of the sheetmetal to fix a threaded hole. works great, thanks

Re: My 64 C-10 fleetside shortbed build
 

progress is progress:metal:

Re: My 64 C-10 fleetside shortbed build
 

You got really good fabrication skills, are you doing all your own body work also?
Posted via Mobile Device

Re: My 64 C-10 fleetside shortbed build
 

Thanks chevy88. Yeah im doing all my own work. I cant afford to pay anyone. lol, I am doing all my own body work also. Im slow at it but just have to take my time and it should turn out good.

Thanks flips, you need a new project, :lol:

Im off work for a few days, I finally finished stripping the paint off the dash and sanded the kick panels tonight. I took a wire brush to the underside and backside of the dash the best I could. I bought some spray can eastwood rust encapsulater to paint the surface rust under there. Hope tomorrow I can push the truck out and blow it off, wipe it down and paint under the dash.

Re: My 64 C-10 fleetside shortbed build
 

nice sunny day today in the mid 50s. I got to push the truck out of the shop and blow all the dust and mess off of it. I wiped down under and behind the dash with wax and grease remover and blew it off again. Used eastwood rust encapsulator to paint over the light surface rust under and behind the dash. Pushed the truck back in the shop and started some bodywork tonight. Still not finished yet but its a start.

Re: My 64 C-10 fleetside shortbed build
 

looking good! makes you wanna get outside when the weather is nice...I know I'll be glad once Spring/Summer rolls around!

Re: My 64 C-10 fleetside shortbed build
 

I like the work your doing. Once I finish my son's truck, we are going to start working on mine again. Ill have to do some floors and rockers and lower front fenders, but that should be about it on the rust repair.

Re: My 64 C-10 fleetside shortbed build
 

Progress is always good. :metal:

Re: My 64 C-10 fleetside shortbed build
 

Been peekin in from time to time. Your movin right along.
Like that you took the time to get under the dash. Thats dedication.

Re: My 64 C-10 fleetside shortbed build
 

nice work, i too like the fact that you took the time to go under the dash,atention to details is where its at:metal:wont be long till we start smelling paint, and your right i do need another project:lol:

Re: My 64 C-10 fleetside shortbed build
 

Hey Guys, Its been a while since I posted on here. Been super busy with work and the family. I haven't worked on the truck too much all this year. I have got a few things done. Some body work and epoxy primmer and painted the firewall. Put the motor and trans in last weekend.

Re: My 64 C-10 fleetside shortbed build
 

Good to hear from you! Truck is looking good.

Re: My 64 C-10 fleetside shortbed build
 

took my power steering gearbox back off and cleaned and painted it. got it installed for the last time now. Also got some brackets and other misc things sand blasted tonight and ready for paint.

Re: My 64 C-10 fleetside shortbed build
 

looking good tony, glad to see ya back at it.i aint got any fish pictures from you lately,have you been any? its about time for the crappie to get started.holler when you can.

Re: My 64 C-10 fleetside shortbed build
 

Making fast progress! looks cool! keep up the good work!:chevy:

Re: My 64 C-10 fleetside shortbed build
 

Hey Guys! Been a while since I posted anything. I have been busy with work and family. I have been tinkering a little on the truck here and there. Got all new brakes, wheel cyl, bearings, seals, and drums done. I mounted the power steering pump and lines. I also fabbed up a top radiator mount. my truck is lowered 3 inch drop springs in the front. My question is what shocks do I need to run? someone said factory shocks will work but I remember someone on here having a part number for a shorter shock from the parts store. thanks!

Re: My 64 C-10 fleetside shortbed build
 

Very nice work on the top radiator hold down.

Re: My 64 C-10 fleetside shortbed build
 

Hey everyone. I haven’t posted anything in a long time. I’m still working on my truck in my spare time. I finally got some paint on the cab and doors. The inside is pretty much done other than carpet and putting the guts back in the doors. Hopefully I’ll get it finished by this summer or at least road worthy.

Re: My 64 C-10 fleetside shortbed build
 

Welcome back! The steering wheel really caught my eye. It looks great :chevy:

Re: My 64 C-10 fleetside shortbed build
 

truck is looking superb in paint - the white wheel looks sharp - nicely done...

Re: My 64 C-10 fleetside shortbed build
 

Thank you for the kind comments. I got both inner fenders on and heater box mounted up.

Re: My 64 C-10 fleetside shortbed build
 

Looking good!:chevy: