Morris Classic Concepts - Seat Belts
 

Seen these guys recommended several times on the board. Going to order through them but was hoping some people on here had some first hand experience with them?

I am 5'8" and just north of 290.. Pretty big around the middle. I can't seem to find measurements on their site - not sure if I need an extender or not? I fit in the stock lap belts prior to their removal, but without much room to spare

Also, for the lap belt in the middle of the bench, they said they only have the 60" belts ( that they label as Rear lap belts) - is that long enough for normal folks to use on the stock bench?

Re: Morris Classic Concepts - Seat Belts
 

. . . .

I bought my seat belts, with the GM logo, from Morris Classic Concepts a few years ago.

I'm 5' 10" and 190 pounds.

When I put on the middle lap belt and pull it tight, there is about three inches of "tail" left past the buckle.

When sitting in the driver's seat with the shoulder belt on, there is PLENTY of room left ( maybe, 8 or 9 inches out from my "middle" )

I was VERY happy with the quality of the belts I got from them - give them a call, they were very helpful to me.

. . . .

Re: Morris Classic Concepts - Seat Belts
 

I second the recommendation for Morris. Their product and service are both excellent. If you have questions about the belts give them a call, I'm sure they will help.