K1416 Suburban part-out- Rolling Chassis
 

1965 4WD Suburban Carryall rolling chassis. $900

1968 350 4 Barrel V8. 350/255 hp, does not turn over. Block casting 3956618.
Non-original SM465 4 spd trans. Transfer case missing shifter.
Front/rear suspension and brakes all there. Axles have 3.73 gears (non-posi). Factory Optional (RPO F76) Spicer/Dana lock-out hubs. All driveshafts are there. Non-original power steering.

This was acquired as a roller and was supposedly sitting in a barn for last 20 years. Body was very rusty and is being parted or scrapped out. Frame is also rusty. Came from Michigan & Wisconsin. No evidence of any significant accidents- just many body dings. Had a trailer hitch. No evidence of a snow plow.

Re: K1416 Suburban part-out- Rolling Chassis
 

More pics

Re: K1416 Suburban part-out- Rolling Chassis
 

I can't tell by my phone but are those Gateway Gumbo Mudder tires?

Re: K1416 Suburban part-out- Rolling Chassis
 

How much for the power steering box and arm?
And if a short water pump, how much for PS pump/bracket and engine pulleys? (I may not need the pulleys)

Re: K1416 Suburban part-out- Rolling Chassis
 

I'll begin parting this out if it it won't sell as a unit. That will be a while. The mounting of the pump and box looks amateur to me, but apparently it worked.

Re: K1416 Suburban part-out- Rolling Chassis
 

More pics

Re: K1416 Suburban part-out- Rolling Chassis
 

They are what I am looking for. If you decide to sell them, please let me know what you need to get for both sides. Thanks, Mike

Re: K1416 Suburban part-out- Rolling Chassis
 

Wish it were a lwb truck chassis

Re: K1416 Suburban part-out- Rolling Chassis
 

I have a decent GMC 4x4 Suburban body in Mt Pleasant MI for sale

Re: K1416 Suburban part-out- Rolling Chassis
 

Do you still have the suburban chassis? If so where are you located?
Thanks
Posted via Mobile Device

Re: K1416 Suburban part-out- Rolling Chassis
 

I'll go with one of Captain Fab's ps box mounts then. Thanks for getting back to me.
If you part it out, I'd be interested in the riser blocks and rear U-bolts.
-Brad

Re: K1416 Suburban part-out- Rolling Chassis
 

Is this 4x4 Burb frame a GMC or Chevy?

Re: K1416 Suburban part-out- Rolling Chassis
 

Chevrolet

Re: K1416 Suburban part-out- Rolling Chassis
 

This is being parted out now. Still interested in the riser blocks? U-bolts are rusted and have been cut with a torch.

Re: K1416 Suburban part-out- Rolling Chassis
 

How much for T-case?

Re: K1416 Suburban part-out- Rolling Chassis
 

$100

Re: K1416 Suburban part-out- Rolling Chassis
 

pm sent

Re: K1416 Suburban part-out- Rolling Chassis
 

Price on locking hubs? Also sending a couple of people your way for rear frame horns and a leaf spring hanger.

Re: K1416 Suburban part-out- Rolling Chassis
 

Hub Loks are SOLD
Rear frame sections are heavily rusted
All leaf spring hangers are OK

Re: K1416 Suburban part-out- Rolling Chassis
 

I'm interested in the driver's side rear hanger if it is intact

Re: K1416 Suburban part-out- Rolling Chassis
 

Is this what you need?

Re: K1416 Suburban part-out- Rolling Chassis
 

How much for the core support mounts?

Re: K1416 Suburban part-out- Rolling Chassis
 

$25 /pr. One is OK, other has rubber de-laminated.

Re: K1416 Suburban part-out- Rolling Chassis
 

Transfer case, mounting brackets, crossmember, and all driveshafts have been SOLD locally.

Re: K1416 Suburban part-out- Rolling Chassis
 

Ok I'll take those