The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   projects and builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=197)
-   -   my 65 fleetside build (https://67-72chevytrucks.com/vboard/showthread.php?t=442370)

flips72 01-23-2011 09:35 PM

my 65 fleetside build
 
well here we go,my 65 is in dire need of a refresher,any tips or opinions welcome.

tommys66 01-23-2011 10:09 PM

Re: my 65 fleetside build
 
man, just look around on this site. If you've got an idea, its probably been done and documented. Use the search function on the top of the site page and bookmark your favorites...the options are endless. there are no rules to your own build, find what you like and go with it

flips72 01-24-2011 10:03 PM

Re: my 65 fleetside build
 
5 Attachment(s)
here we go

flips72 01-24-2011 10:05 PM

Re: my 65 fleetside build
 
4 Attachment(s)
and here is some more

Alan's Classic 01-24-2011 10:39 PM

Re: my 65 fleetside build
 
Man, it looks great in pics. Drive it and find another one to redo. ;) Unless there is more too it than what we can see.

Shaun1162 01-24-2011 11:06 PM

Re: my 65 fleetside build
 
I'm with Alan... From the pics that thing already looks mint!

Captainfab 01-25-2011 03:19 AM

Re: my 65 fleetside build
 
I agree......looked to me like you were done.

stealth_weapons 01-25-2011 07:18 AM

Re: my 65 fleetside build
 
i have a tip...... give me your engine and start over with a newer one.....j/k the truck looks great. i dont know what else could be done..... but seriously give me your engine

BigJoe29 01-25-2011 10:30 AM

Re: my 65 fleetside build
 
the engine looked great. the whole truck looked good, i'm with everyone else i woulda drove the **** out of that one and got another project.

flips72 01-25-2011 06:27 PM

Re: my 65 fleetside build
 
there is alot more than meets the eye, very little rust but pretty rough to my eye, just started stripping the bedsides yesterday and got a terrible surprise, the whole side looks as though it has been sideswipped hard,po must have been one heck of a body man bondo was 1/2 inch thick in places, cant have that! so now i am on the look out for a bed side. my drivers side is in great shape, oh well guess i should have polled you guys first, to late now though.

flips72 02-03-2011 09:49 PM

Re: my 65 fleetside build
 
5 Attachment(s)
ell, here is where i am at now, passenger bed side was very rough after i got it stripped(side swipped) drivers side is beautiful, repaired inner lip and applied epoxy primer, may have found a bedside for passenger side, still waiting on the guy to make up his mind. here is some pics of driver side.

flips72 02-03-2011 09:50 PM

Re: my 65 fleetside build
 
1 Attachment(s)
one more, a couple of them kinda blurry ( cell phone)

protrash64 02-03-2011 10:33 PM

Re: my 65 fleetside build
 
Nice work on the bedside, flips. I built my SB out of a '66 and a '62. Hours upon hours to get it even somewhat nice.

What size is your steering wheel? I love the look of those but dont know if I could yank around my manual steer '66.

flips72 02-04-2011 02:02 PM

Re: my 65 fleetside build
 
i believe its 14 inch cant really remember.

allaboutchevelles 02-04-2011 07:50 PM

Re: my 65 fleetside build
 
hey Flip, Very nice looking truck. I just want to get mine in the state your starting at. Cant wait to see how yours turns out.

my 64 C10 build:http://67-72chevytrucks.com/vboard/s...d.php?t=439559

flips72 02-05-2011 11:48 PM

Re: my 65 fleetside build
 
thanks , just checked out your build (allaboutchevelles) looks good to me, also looks as though you have some skills. i wish i could find a bed like the one you did, looks like i will be cutting a long bed lower skin down to fit mine, oh wellthats my luck just got back from moultrie ga swap meet there was hardly anything for our trucks, kinda disappointed in the whole meet, not many vendors, probably the weather. i hope to get back to work monday .

DPowers 02-06-2011 12:28 AM

Re: my 65 fleetside build
 
Good looking truck

Captainfab 02-06-2011 01:59 AM

Re: my 65 fleetside build
 
Just remember that the short bed wheel openings are smaller than the longbed wheel openings.

Quote:

Originally Posted by flips72 (Post 4465707)
thanks , just checked out your build (allaboutchevelles) looks good to me, also looks as though you have some skills. i wish i could find a bed like the one you did, looks like i will be cutting a long bed lower skin down to fit mine, oh wellthats my luck just got back from moultrie ga swap meet there was hardly anything for our trucks, kinda disappointed in the whole meet, not many vendors, probably the weather. i hope to get back to work monday .


flips72 02-06-2011 11:16 PM

Re: my 65 fleetside build
 
i sure didnt know that, i just took it for granted they were the same in the wheel well opening area i figured it was twelve inches longer in the front and eight in the rear, never even considered the wheel well, cant seem to catch a break when it comes to this bed side. thats what is so good about this forum, there is a whole lot of knowledge here. thanks capt.fab you probably just saved me a lot of time and work.

allaboutchevelles 02-06-2011 11:41 PM

Re: my 65 fleetside build
 
Hey Flip. The guys on spike TV show called TRUCKS cut down a 66 C10 long bed a few years ago. They did what you are talking about cutting the front and rear and it seemed to turn out fine. I dont remember them doing any work to the wheel openings. http://www.powerblocktv.com/site3/

flips72 02-08-2011 08:21 PM

Re: my 65 fleetside build
 
just checked my wheel opening against a long bed seems to be about 1 1/2 inches longer from the front of the wheel opening to the rear fo the opening, my question would be if i could cut that out of the center of the wheel opening and make it the same as a short?my brother did one like they did on trucks looks good but i am just wanting to do the lower section of my bed.

flips72 03-14-2011 08:02 PM

Re: my 65 fleetside build
 
4 Attachment(s)
well after a couple months and many miles with no luck finding a good bedside, i finally made up my mind to fix mine so i could get back to work. went to pull a part in niota tn and cut the lower side panel out of a long bed truck they had,75.00. brought it home and cut it down to shoet bed deminsions (3 inchs gone) cut my bad part out which was mainly the wheel well lip area. bought a flanging tool from northern tool(60 bucks) flanged my bed and welded in the new panel. and to my surprise it turned out pretty good for a amatuer. here is some pics now maybe i can get back to work, its killing me not being able to drive my truck, although i did get it out and drove it sat morning,man you can do some mean burnouts without a bed almost cost myself some more work,lol

flips72 03-14-2011 08:06 PM

Re: my 65 fleetside build
 
5 Attachment(s)
here is some more

Alan's Classic 03-14-2011 08:26 PM

Re: my 65 fleetside build
 
Looks really nice. Great job.:metal:

flips72 03-14-2011 09:02 PM

Re: my 65 fleetside build
 
thanks alot alan, thats one good thing about this forum, when you are about ready to throw in the towel someone is always there to encourage you to keep plugging.


All times are GMT -4. The time now is 10:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com