Need ehlp - ID this plug
 

Had my steering column out and when I put it all back together I cannot remember where this plug goes. I cannot find that color combination on my wiring diagram.

Any ideas?

https://i.imgur.com/T40Vg35b.jpg

Re: Need ehlp - ID this plug
 

I cannot see it clearly, but it looks like the brake pedal switch. plug

Re: Need ehlp - ID this plug
 

Thanks but nope - I have that one already. Wires are pink with black trace and purple on this one.

Re: Need ehlp - ID this plug
 

did you use to have cruise control ? some early units had a vac cut out switch to dump the diaphragm and also a switch on it .

Re: Need ehlp - ID this plug
 

I know pink w/black is a switched 12V lead, but like you I don't see that color combo used in my electrics diagrams either.

Only thing rining in my mind now might be for safety belts connection. What year is the truck and is it 2wd/4wd?

Re: Need ehlp - ID this plug
 

That might be it...didn't think about the old vac switch also having electrical connector. I did tear out all of the factory cruise wiring when I had the column out. Thank you!!

Re: Need ehlp - ID this plug
 

if you did this also make sure to plug the hose off . i chased down a vac leak sound under the dash of my first truck and forgot this and replaced a brake booster for nothing . . . . it was the dam hose sucking air when i hit the brakes .:lol:

Re: Need ehlp - ID this plug
 

Oh yeah. All of the underhood stuff has been gone for a while and the vac hose disconnected.

On a side note, if anyone needs a complete factory CC setup (minus the lever on the column) send me a PM.