The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=37)
-   -   76 Blazer LS swap (https://67-72chevytrucks.com/vboard/showthread.php?t=780181)

lukeembry 01-25-2019 10:35 AM

76 Blazer LS swap
 
2 Attachment(s)
Just finished up a Blazer LS3/4L65E swap. thought I would share some pics of the build and maybe help others out if they are looking to do the same feel free to ask questions.

lukeembry 01-25-2019 10:41 AM

Re: 76 Blazer LS swap
 
5 Attachment(s)
went ahead and installed a new heater core and evaporator so hopefully they don't have to be changed again. I will be using Hooker Blackheart swap headers and engine mounts on this build

68Timber 01-25-2019 11:23 AM

Re: 76 Blazer LS swap
 
Beautiful truck!

TooTall 02-01-2019 02:22 PM

Re: 76 Blazer LS swap
 
Very nice headers
Are you going to run the A/C system?
How did you hook up the gas pedal? DBW or DBC ?
What are you doing for the engine harness?
Making your own fuel system in the tank?

lukeembry 02-01-2019 10:33 PM

Re: 76 Blazer LS swap
 
Quote:

Originally Posted by TooTall (Post 8456357)
Very nice headers
Are you going to run the A/C system?
How did you hook up the gas pedal? DBW or DBC ?
What are you doing for the engine harness?
Making your own fuel system in the tank?

yes it will have the factory air with a low mount Holley compressor set up
I will run DBW, I will post pics of the pedal soon
the engine/trans will be controlled by a Holley Terminator EFI system
in-tank 255lph pump with a corvette regulator/filter

TooTall 02-03-2019 04:06 PM

Re: 76 Blazer LS swap
 
Quote:

Originally Posted by lukeembry (Post 8456647)
yes it will have the factory air with a low mount Holley compressor set up
I will run DBW, I will post pics of the pedal soon
the engine/trans will be controlled by a Holley Terminator EFI system
in-tank 255lph pump with a corvette regulator/filter

looking forward to see how that low mount works out!

lukeembry 02-08-2019 10:23 AM

Re: 76 Blazer LS swap
 
5 Attachment(s)
Trans cooler mounted along with the A/C condenser, Earls Ultra-Pro oil cooler

Fuel system build using a Holley 12-914 fuel pump on the factory blazer EFI tank

mcnally351 02-08-2019 11:27 PM

Re: 76 Blazer LS swap
 
Nice truck

lukeembry 03-17-2020 09:37 AM

Re: 76 Blazer LS swap
 
4 Attachment(s)
Holley EFI going in, Holley will be controlling the LS3 engine and 4L75 trans. made a bracket to mount the GM DBW pedal along with a MSD solid state relay for powering the Dakota Digital dash and Holley ECU

tvblazer78 04-21-2020 03:46 PM

Re: 76 Blazer LS swap
 
Quote:

Originally Posted by lukeembry (Post 8696673)
Holley EFI going in, Holley will be controlling the LS3 engine and 4L75 trans. made a bracket to mount the GM DBW pedal along with a MSD solid state relay for powering the Dakota Digital dash and Holley ECU

Looks sweet! Nice and clean..

Hart_Rod 04-25-2020 09:26 AM

Re: 76 Blazer LS swap
 
Clean build as always, :metal:.

Ryan Hubbard 05-04-2020 07:19 PM

Re: 76 Blazer LS swap
 
Which upper radiator hose did you use?
Who's radiator did you use?

I am doing this conversion on my Suburban and I like your setup.

Great job

swissarmychainsaw 06-13-2020 07:17 PM

Re: 76 Blazer LS swap
 
And no one mentions the ridiculously clean garage? I'm jealous!

Do you have a part number for the trans cooler and mounts? Or is that the ail cooler sitting in front of the Condenser?

Is this a US Forest service truck?

I love what you are doing!

LEEVON 06-19-2020 04:25 PM

Re: 76 Blazer LS swap
 
Love it, thanks for the swap tips!

rodstored-72 06-22-2020 04:49 PM

Re: 76 Blazer LS swap
 
Quote:

Originally Posted by swissarmychainsaw (Post 8757144)
And no one mentions the ridiculously clean garage? I'm jealous!.......
...I love what you are doing!

Ditto (jealous) ...or the fact that the truck looks like it was wiped down with a container of baby wipes!... :lol:!! well... I do believe that Luke is a top 3 builder on this site... next to "N2TRUX" and "CHROMAHOLIC".... just crazy detail and a scary eye for great build parts!!
thank you Luke for sharing & letting us observe your great work!! :metal:

zellway 07-24-2020 11:13 AM

Re: 76 Blazer LS swap
 
beautiful ride! love how clean you made the install. I have been thinking my Jimmy might need the LS treatment.

Low Elco 09-30-2020 09:03 AM

Re: 76 Blazer LS swap
 
Quote:

Originally Posted by rodstored-72 (Post 8762125)
Ditto (jealous) ...or the fact that the truck looks like it was wiped down with a container of baby wipes!... :lol:!! well... I do believe that Luke is a top 3 builder on this site... next to "N2TRUX" and "CHROMAHOLIC".... just crazy detail and a scary eye for great build parts!!
thank you Luke for sharing & letting us observe your great work!! :metal:

I was gonna say, Truck, schnuck, look at that garage! But the truck is awesome too!

Mr.Rogers 01-14-2021 09:02 PM

Re: 76 Blazer LS swap
 
Love the build! Which brand of upper and lower radiator hoses are you using and what are those part numbers? Also, did you do any engine work such as a camshaft or ported heads? How are you liking the power? Is there anything you would have done differently?

Apologies for all of the questions, I just thought I would get them all out in one shot.


All times are GMT -4. The time now is 07:48 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com