Re: D52 Caliper Rear Disc Brake Brackets
 

Any thing for 88-98 available??

Re: D52 Caliper Rear Disc Brake Brackets
 

Sorry no, not yet. I still can't get all these local people to leave me alone so that I can work on new products and installation instructions. Which differential and what size of original drum brakes do you have?

Re: D52 Caliper Rear Disc Brake Brackets
 

10 bolt with 10 inch drums 3.556 x 2.840 backing plate
Mounting pattern 3.078 tubing od

Re: D52 Caliper Rear Disc Brake Brackets
 

Let me see what I can do about determining the brake offset. I haven't been able to find a definitive answer online. I should have it written down at the shop. If nothing else I will have to tear apart the '90 10 bolt I have at the shop.

Re: D52 Caliper Rear Disc Brake Brackets
 

I mounted my brackets ( awesome by the way ) and I bolted on my D52 Wilwood calipers and I have a question about the Wilwood brake shoes.... the inner shoe goes on with the bolt going through the hole in the shoe and is snug....... the outer shoe just has the tabs that rest on the calipers yet they are loose fitting? Should they be?

I don't have nay brake lines or anything hooked up yet and not sure if that makes a difference or not?? Do they tighten up once there's brake lines and pressure attached???

Re: D52 Caliper Rear Disc Brake Brackets
 

It has been many years since I have had hands on with the Wilwood dual piston calipers but I do not recall the outer shoe being loose. On a stock D52 caliper they are not loose. Have you contacted Wilwood about this issue?

Re: D52 Caliper Rear Disc Brake Brackets
 

my outside pads aren’t super tight, but they work fine and don’t go anywhere while dragging slightly on the rotors

Re: D52 Caliper Rear Disc Brake Brackets
 

Will be sending over funds for my brackets today. Thanks!

Re: D52 Caliper Rear Disc Brake Brackets
 

I have not received a payment from you today. Are you sure you sent it to the correct email address?

Re: D52 Caliper Rear Disc Brake Brackets
 

Sorry Cap, got tied up with work yesterday and forgot to send. Sending it now. Thanks!

Re: D52 Caliper Rear Disc Brake Brackets
 

Should see the payment now. Thanks again Cap! Hope to actually get these on this time. LOL

Re: D52 Caliper Rear Disc Brake Brackets
 

Payment received. I will get a set over to the powder coaters on Monday.

Re: D52 Caliper Rear Disc Brake Brackets
 

I sent you a PM Captainfab

Re: D52 Caliper Rear Disc Brake Brackets
 

I replied to your PM.

Re: D52 Caliper Rear Disc Brake Brackets
 

Check your PM. I need your address!

Re: D52 Caliper Rear Disc Brake Brackets
 

Please be patient. I work 80hrs/7 days a week every week every month. I only have time to log onto this forum after I get home from my day of work. I replied to your PM.

Re: D52 Caliper Rear Disc Brake Brackets
 

I'm interested in a set of brackets for a 10 bolt out of a 87 r10. What do you need to know ?
Posted via Mobile Device

Re: D52 Caliper Rear Disc Brake Brackets
 

To place an order you just need to make the payment. I will send you a PM.

Re: D52 Caliper Rear Disc Brake Brackets
 

Received parts , they are well made & fit perfect. Thanks
Posted via Mobile Device

Re: D52 Caliper Rear Disc Brake Brackets
 

Thanks for the compliments :)

Re: D52 Caliper Rear Disc Brake Brackets
 

PM sent for some rear disc brackets

Re: D52 Caliper Rear Disc Brake Brackets
 

I replied to both of your PM's........

Back at ya for PayPal. Thank you sir!
Posted via Mobile Device

Re: D52 Caliper Rear Disc Brake Brackets
 

I'm currently working on converting my rear to disc on my '70. Can these brackets also be used when keeping the 6 lug pattern?

Planned on using 1990 K1500 w/ f44 (heavy duty) chassis 6 lug rotors (11.6 dia. and 1.29 thick) and using 71-72 front calipers in the rear. Any foreseen issues I may have? Besides some possible machining...

Re: D52 Caliper Rear Disc Brake Brackets
 

You can not just randomly change the rotor and still have the rotor and caliper line up. I have yet to find any two factory replacement rotors for different applications be exactly the same and interchangeable. I have no idea what the height is of the rotor you are wanting to use. Then there is the issue that most later model rotors do not have sufficient contact area to accommodate the D52 pads without having them hang over the outside edge.

You know that I do make 2 rear disc brackets for the 6 lug correct?

http://www.67-72chevytrucks.com/vboa...d.php?t=637489

http://www.67-72chevytrucks.com/vboa...d.php?t=494411