The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   KS Horn Caps F/S (https://67-72chevytrucks.com/vboard/showthread.php?t=534863)

Ironhorse 07-21-2012 12:54 PM
Horn Caps F/S
 
1 Attachment(s)
Total of 9 caps, 3 blue Chevrolet, 2 blue GMC, 2 metal '63-'66 (I think) and 1 metal '60-'61 cap (I think) Not sure on the metal caps as to the year of use. Some plastic caps may have one tab missing, some are complete. All nine caps $40 shipped lower 48, money oder only, no Paypal.

Hart_Rod 07-21-2012 01:32 PM
Re: Horn Caps F/S
 
Can you post better pics of buttons with the red Chevy emblems including a side view?
Posted via Mobile Device

Ironhorse 07-21-2012 02:17 PM
Re: Horn Caps F/S
 
2 Attachment(s)
Couple pics of the sides, both right side up and up side down. Rubbers good on both caps, no splits. One cap has some minor nics and needs a re-paint on the emblem. Other cap is really nice for it's age. Hope these help.

Hart_Rod 07-21-2012 02:48 PM
Re: Horn Caps F/S
 
Quote:
Originally Posted by Ironhorse (Post 5497913)
Couple pics of the sides, both right side up and up side down. Rubbers good on both caps, no splits. One cap has some minor nics and needs a re-paint on the emblem. Other cap is really nice for it's age. Hope these help.
Thanks for the pictures. Do you think these will fit on a 67/68 chevy truck steering wheel?

Ironhorse 07-21-2012 03:54 PM
Re: Horn Caps F/S
 
I honestly can't say on the fit to the 67-68 style wheel. My '71 truck has a newer mid-80's wheel and cap and not sure what the diameter is of the 67-68 style steering wheel. Sorry, I know that does'nt help much.

Hart_Rod 07-21-2012 04:13 PM
Re: Horn Caps F/S
 
If you'll measure the rubber ring, I'll measure my wheel.
Posted via Mobile Device

Ironhorse 07-21-2012 04:49 PM
Re: Horn Caps F/S
 
Rob, measured the rubber ring at 2 1/4" in dia., snaps tight onto a 3-hole metal retainer cup. Same type cups as pictured in previous posting "Horn & Column Parts F/S" Not sure if it is the same style cup you might have on a 67-68 wheel. May fit but just not sure. Sorry can't answer better than that.

Hart_Rod 07-26-2012 02:39 PM
Re: Horn Caps F/S
 
Quote:
Originally Posted by Ironhorse (Post 5498118)
Rob, measured the rubber ring at 2 1/4" in dia., snaps tight onto a 3-hole metal retainer cup. Same type cups as pictured in previous posting "Horn & Column Parts F/S" Not sure if it is the same style cup you might have on a 67-68 wheel. May fit but just not sure. Sorry can't answer better than that.
How much for the best one shipped to 32571?
Posted via Mobile Device

Ironhorse 07-26-2012 04:24 PM
Re: Horn Caps F/S
 
Was really hoping to sell the lot as one bunch but would do $10 shipped for the best bowtie metal cap. Figure shipping at couple bucks or so. $I'd give the cap an 8 + on a 1-10, good rubber ring with no splits. Sound fair to you?

Hart_Rod 07-26-2012 09:26 PM
Re: Horn Caps F/S
 
Quote:
Originally Posted by Ironhorse (Post 5506855)
Was really hoping to sell the lot as one bunch but would do $10 shipped for the best bowtie metal cap. Figure shipping at couple bucks or so. $I'd give the cap an 8 + on a 1-10, good rubber ring with no splits. Sound fair to you?
Sounds good send me your PayPal
Posted via Mobile Device

Ironhorse 07-27-2012 06:44 AM
Re: Horn Caps F/S
 
Rob, sorry but as I mentioned in the start of the posting I don't have a Paypal account. I only use money orders when I buy or sell over the 'net. I have also had board members send $$ in folded in couple sheets of paper for small item purchases. If still interested PM me for a mailing address for payment.


All times are GMT -4. The time now is 06:27 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com