The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   How Can i Fit 14 Inch wide tires in the rear?? (https://67-72chevytrucks.com/vboard/showthread.php?t=407177)

MobbinINmy69 06-12-2010 01:12 AM

How Can i Fit 14 Inch wide tires in the rear??
 
I'm looking to buy some 20x14 Rims for my 1969 Chevy Stepside Pickup...Am i insane or something?! Don't answer that. i want to find a way to put them on without Tubing and without rubbing. This is my first Resto/mod so i don't know a whole lot about these things. Any help or insight or expertise i could get would be very welcomed!

cdowns 06-12-2010 06:05 AM

Re: How Can i Fit 14 Inch wide tires in the rear??
 
with a backspace of 41/2 you can do it by mearly widening your rear fenders aroud 6"i'd think
you may not fit into parking spaces
check with the motor vehicle dept as you may exceed width specs of the law and be liable for equipment tickets or maybe get by with a special liscence waiver for some tax money

prostreetC-10 06-12-2010 09:22 AM

Re: How Can i Fit 14 Inch wide tires in the rear??
 
Let me get this straight......you want all that to the outside? Won't you look like the slot cars I had when I was young? Just remember when you have tons of dish/offset to the outside.....it's really hard on the bearings!

SCOTI 06-12-2010 10:11 AM

Re: How Can i Fit 14 Inch wide tires in the rear??
 
Quote:

Originally Posted by MobbinINmy69 (Post 4026999)
I'm looking to buy some 20x14 Rims for my 1969 Chevy Stepside Pickup...Am i insane or something?! Don't answer that. i want to find a way to put them on without Tubing and without rubbing. This is my first Resto/mod so i don't know a whole lot about these things. Any help or insight or expertise i could get would be very welcomed!

Why no tubbing? It would be far easier when fabricating.... No tubs in the bed = widening the rear fenders if your plan is to stuff a 15" wheel where it's a tight fit for a 10" wide wheel.

QKENUF4U 06-12-2010 02:21 PM

Re: How Can i Fit 14 Inch wide tires in the rear??
 
no way to fit anything like that without atleast a little bit of tubbing.... my 31x18.5s fit on 14" rims with 10" backspacing...(been a long time so i could be wrong on BS-got the info from this board)
http://i147.photobucket.com/albums/r...u/000_1156.jpg

http://i147.photobucket.com/albums/r...u/000_1161.jpg

steinepstein 06-12-2010 02:47 PM

Re: How Can i Fit 14 Inch wide tires in the rear??
 
QKENUF4U,

Do you have a narrowed frame back there? I measured about 18.5-19" from the frame to the inside of the fender... Just wondering, I'd love to go that wide....very cool.

Thanks.

72freak 06-12-2010 04:53 PM

Re: How Can i Fit 14 Inch wide tires in the rear??
 
1 Attachment(s)
This is the only way I know to fit it all in there...........

QKENUF4U 06-12-2010 08:08 PM

Re: How Can i Fit 14 Inch wide tires in the rear??
 
Quote:

Originally Posted by steinepstein (Post 4027512)
QKENUF4U,

Do you have a narrowed frame back there? I measured about 18.5-19" from the frame to the inside of the fender... Just wondering, I'd love to go that wide....very cool.

Thanks.

no frame mods/no axle mods.... with the right BS and rim width it works perfect.... no longer have the truck thanks to an EX-FIANCE.... :waah:

prostreetC-10 06-13-2010 12:54 AM

Re: How Can i Fit 14 Inch wide tires in the rear??
 
Just look at my build thread in my signature line. It will show you how to get 18.5's with 14" wheels and no narrowed rear end.

steinepstein 06-13-2010 08:26 PM

Re: How Can i Fit 14 Inch wide tires in the rear??
 
Awesome, thanks!


All times are GMT -4. The time now is 06:31 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com