The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - How to vent an under bed gas tank ? (https://67-72chevytrucks.com/vboard/showthread.php?t=820315)

kens65fb

04-03-2021 06:59 PM

How to vent an under bed gas tank ?

I'm getting ready to install my under bed gas tank, what is the best way to vent these tanks?

bigmoe

04-03-2021 11:48 PM

Re: How to vent an under bed gas tank ?

I mounted my vent up high, about midway up, between the inner and outer fender. My tank came with a vent top, the kind that have a ball inside that will stop gas from coming out in a roll over.

The Rocknrod

04-03-2021 11:51 PM

Re: How to vent an under bed gas tank ?

I did the same thing.

AcampoDave

04-04-2021 01:16 AM

Re: How to vent an under bed gas tank ?

I used the check ball style vent fitting at the end of a hose that I put inside the passenger's side rear stake pocket.

kens65fb

04-04-2021 07:32 AM

Re: How to vent an under bed gas tank ?

Quote:

Originally Posted by AcampoDave (Post 8903484)

I used the check ball style vent fitting at the end of a hose that I put inside the passenger's side rear stake pocket.

Have a pic of that check ball vent fitting ?

kens65fb

04-04-2021 07:55 AM

Re: How to vent an under bed gas tank ?

1 Attachment(s)

Can I just use this ?

The Rocknrod

04-04-2021 07:58 AM

Re: How to vent an under bed gas tank ?

1 Attachment(s)

Quote:

Originally Posted by kens65fb (Post 8903518)

Have a pic of that check ball vent fitting ?

Here's a pic:

The Rocknrod

04-04-2021 08:05 AM

Re: How to vent an under bed gas tank ?

Quote:

Originally Posted by kens65fb (Post 8903522)

Can I just use this ?

For an underbed gas tank?

kens65fb

04-04-2021 09:34 AM

Re: How to vent an under bed gas tank ?

2 Attachment(s)

Quote:

Originally Posted by The Rocknrod (Post 8903526)

For an underbed gas tank?

I'm going with a steel bed, I was looking to do something similar to this.

AcampoDave

04-04-2021 09:39 AM

Re: How to vent an under bed gas tank ?

Quote:

Originally Posted by kens65fb (Post 8903518)

Have a pic of that check ball vent fitting ?

This one: https://www.tanksinc.com/index.cfm/p...prod/prd98.htm

All times are GMT -4. The time now is 11:03 AM.