Re: 1986 Short bed 2WD
 

Any info or pics on how you wired the windstar fan? I picked one up for my 84 today.
Posted via Mobile Device

Re: 1986 Short bed 2WD
 

Sorry I missed your post. I used the two relay circuit outlined in the GM diagram below. I was able to use the dual fan control on my TPI ecm to control them. If you are TBI or carb, you can use a 1986 2.8 V6 Camaro fan switch to control the fans in place of the ECM, it screws into a 3/8" NPT coolant port on your engine. Turns on the fans at 190.

http://i272.photobucket.com/albums/j...ps032a9ee8.jpg

Re: 1986 Short bed 2WD
 

Shortbeds are heavier than they look, but three of us managed it.

http://i1345.photobucket.com/albums/...ps7cf48ce2.jpg

One end of the broken spring, the other end is completely snapped off. Maybe from overloading? I've towed a few times at 10k+ gross weight; factory rating is 6500 gross. :D

http://i1345.photobucket.com/albums/...ps7fed3f8a.jpg

Picking up 8/1 HD springs at a local spring shop for 265 each.

Re: 1986 Short bed 2WD
 

Went down to my local spring shop today and picked up the new rear leaf springs. It was a pretty good hit to the wallet but I need them; I also got new u-bolt bent up and the eye bolts.

http://i1345.photobucket.com/albums/...ps759f3442.jpg

My new 3/4 ton springs:

http://i1345.photobucket.com/albums/...ps6c9e01fe.jpg

Re: 1986 Short bed 2WD
 

nice having the spring shop close by. Did they have to make the springs for you? i need some for my blazer. just havent given them a call yet. What did they set you back?

Re: 1986 Short bed 2WD
 

Just give them a ring, they had 4 of these springs in stock. I paid 530 out the door for the pair.

Re: 1986 Short bed 2WD
 

Part numbers and bolt sizes for a heavy half rear spring conversion.

http://i1345.photobucket.com/albums/...ps889d9d47.jpg

Re: 1986 Short bed 2WD
 

And done!

http://i1345.photobucket.com/albums/...psbe5386ae.jpg

Mostly a one man job here, got some help from my father lining up the springs to insert the eye bolts.

Got the truck back on the ground after some undercoating was applied to the frame. Measuring at the hitch, it looks like I gained about 3 inches of height. yikes! I figure the springs are going to settle some, but maybe its time to put on lowering shackles while it's easy.

Re: 1986 Short bed 2WD
 

thats a fair price. you'll pay that plus shipping threw lmc or any other mail order place.

Re: 1986 Short bed 2WD
 

looks good/beefy springs-jeff

Re: 1986 Short bed 2WD
 

Teaser pic...

http://i1345.photobucket.com/albums/...psc8ff31b0.jpg

Going to need a new air dam

Re: 1986 Short bed 2WD
 

http://i1345.photobucket.com/albums/...ps38b5acff.jpg

Done besides the exhaust.

Re: 1986 Short bed 2WD
 

good progress/looks good-jeff

Re: 1986 Short bed 2WD
 

So are you still planning on putting the supercharger on? How's the tpi running? Truck looks great, you've definitely turned it around!

Re: 1986 Short bed 2WD
 

Thanks Jeff!

TPI is great! Still starts right up, no issues if the truck sits for a few weeks. I am planning on installing the supercharger if I can design and fabricate a mount for it. That may not happen.

Re: 1986 Short bed 2WD
 

Headers coated, ready to be installed. And a cat.

http://i1345.photobucket.com/albums/...ps03f70213.jpg

Re: 1986 Short bed 2WD
 

The Road Warrior, back for more.

http://i1345.photobucket.com/albums/...ps63f9aeb2.jpg

Re: 1986 Short bed 2WD
 

Hats off to you Bro! great job, what's in the future for the Lady ;)

Re: 1986 Short bed 2WD
 

Well nothing new to report. I let her sit outside all winter with a dead battery. Pulled the battery and charged up a spare one I had, put it in today and she lit off as soon as I hit the key! Gotta love EFI.

Took her for a ride to pickup some parts for my Olds, and man it's running great. 3/4ton springs make for a rough ride on these back country roads however.

Sitting nose to nose with my Olds Custom Cruiser

http://i1345.photobucket.com/albums/...ps8d105119.jpg

http://i1345.photobucket.com/albums/...ps3a28fab0.jpg

Re: 1986 Short bed 2WD
 

Started the interior project this week..

http://i1345.photobucket.com/albums/...ps908eccd9.jpg

All surface rust on the drivers side pan. Gonna clean it all up and lay down fresh jute. Dyeing the carpet black and spraying bedliner on the kick panels to finish it off.

Re: 1986 Short bed 2WD
 

Time for a front end rebuild and other things that need attention.

https://fbcdn-sphotos-a-a.akamaihd.n...73224972_n.jpg

Half of my drop kit is here too.

Re: 1986 Short bed 2WD
 

Front end done! All new Moog wear parts, Western Chassis 2.5" drop spindles and rear hanger kit.

http://i1345.photobucket.com/albums/...ps00806ba5.jpg

Quite a difference from what I started with 5 years ago.

http://i272.photobucket.com/albums/j...y/100_0324.jpg

I did also finish the interior, came out pretty good for $25 invested. Lately I've been taking a page out of TX Firefighter's book and saving cash to buy things. In this case I got a windfall when I turned in a bunch of cores and cat convertors to the local recycler, ended up with way more cash than I was expecting.

Re: 1986 Short bed 2WD
 

sweet/getting there:)-jeff

Re: 1986 Short bed 2WD
 

Just read through your whole thread, I must say I dig the tpi and It looks way better now that you've lowered it!

Re: 1986 Short bed 2WD
 

Quick question, id assume the grill you have currently is the correct one for your year, 85-87 with a few sections painted black; am I correct? I really like it.