Parting 92 Chevy 2500 4x4 Diesel
5 Attachment(s)
Diesel motor is junk.
Transmission and front clip SOLD. Doors completer $50 each LOCAL. Grey 60/40 seat $100 LOCAL. Tilt Steering column with key $75 PLUS Shipping. Hydroboost with, ABS, $100 Plus shipping. Turbo $25 Plus shipping. Diesel starter $30 plus shipping. Reciever hitch $40 plus shipping. |
Re: Parting 92 Chevy 2500 4x4 Diesel
Hey, interested in the fender flares if their in good shape what would you want for them? and if the instrument panel trim is grey how much for it?
|
Re: Parting 92 Chevy 2500 4x4 Diesel
Sorry, the flares went with the front clip. Thanks, Ray
|
Re: Parting 92 Chevy 2500 4x4 Diesel
Will you sell the driver`s exterior door handle,if in good shape?How about the passenger side cowl vent louver?
|
Re: Parting 92 Chevy 2500 4x4 Diesel
Do you have the air box to turbo tubing, the driver side rear bumper step pad, the pair of grey visors?
Ill also jump in line on the driver door handle and cowl vent louver. I also could use the hydroboost reservoir cover. Just don't need the whole setup. |
Re: Parting 92 Chevy 2500 4x4 Diesel
i need the engine wiring harness real bad for my 93 not sure if you still have all of it please let me know and might need the puter also
|
Re: Parting 92 Chevy 2500 4x4 Diesel
I'm out of town right now so I will check on all parts ASAP. Thanks for your patience.
special K- I want to keep the doors complete right now. The p.s. cowl vent- if it is the short piece that comes off to remove the front clip, $10 plus shipping but let me double check to see if there is any damage to it. wancosc356- I want to leave the hydro boost complete, I will check on the visors, step pad, and turbo tubing. Most of the top engine parts are scattered in the bed. cnshoot- If the engine wiring harness is good $30 plus shipping. I will check ASAP. Thanks, Ray |
Re: Parting 92 Chevy 2500 4x4 Diesel
Thanks,I`ll pass.I mostly need the handle.
|
Re: Parting 92 Chevy 2500 4x4 Diesel
Quote:
I will be away until Sun. Thanks, Ray |
Re: Parting 92 Chevy 2500 4x4 Diesel
Quote:
|
Re: Parting 92 Chevy 2500 4x4 Diesel
Quote:
Also, is the gas pedal assembly a cable setup or an electronic setup? If electronic, could u get me a pic of it? Thanks. |
Re: Parting 92 Chevy 2500 4x4 Diesel
How much for the steering wheel with button and horn contact?
Smitty |
Re: Parting 92 Chevy 2500 4x4 Diesel
Quote:
|
Re: Parting 92 Chevy 2500 4x4 Diesel
Quote:
|
Re: Parting 92 Chevy 2500 4x4 Diesel
Ill take it. Send payment info.
Smitty |
Re: Parting 92 Chevy 2500 4x4 Diesel
5 Attachment(s)
Pics.
|
Re: Parting 92 Chevy 2500 4x4 Diesel
4 Attachment(s)
more pics.
|
Re: Parting 92 Chevy 2500 4x4 Diesel
Looks good, need payment info.
Smitty |
Re: Parting 92 Chevy 2500 4x4 Diesel
I'd like those tow hooks off the front end. The factory black hooks.
If you wouldnt mind PMing me a price, or something. I may forget to check this thread again, but I do want those. |
Re: Parting 92 Chevy 2500 4x4 Diesel
how much do you want for the upper and lower intake, both exhaust manifolds, exhaust cross over, turbo, injectors...pretty much everything to put the turbo on my 6.2...shipped to a business address 29150...thanks Ray
edit: also, does it have a serpentine belt system on the front of it? |
Re: Parting 92 Chevy 2500 4x4 Diesel
71meangreenc10-pm sent
HarrisonTX- $31 shipped on the tow hooks pm sent Thanks, Ray |
Re: Parting 92 Chevy 2500 4x4 Diesel
Paypal sent.
Thanks Smitty |
Re: Parting 92 Chevy 2500 4x4 Diesel
Quote:
Thanks, Ray |
Re: Parting 92 Chevy 2500 4x4 Diesel
I would love to get the setup for the turbo for that price plus the shipping...also, I need the pulleys, the tensioner, and also the high output water crossover...it should have two thermostats in it, I think...thanks again Ray...
edit: also, do you know what turbo that is GM-? edit again: looks like I need these things for the turbo swap...thanks Ray 1)turbo 2)turbo exhaust manifold 3)exhaust crossover pipe 4)exhaust downpipe 5)oil feed line 6)oil drain plate and drain tube 7)airfilter 8)CDR hookup...this looks like a tuna can on the front of the top of the motor 9)upper and lower 6.5 intake 10)injectors 11)injector lines from the injection pump if you don't have all of this, that's cool...I'd like to have everything that you have on the list though...thanks |
Re: Parting 92 Chevy 2500 4x4 Diesel
The turbo tube looks good. It doesn't have any rips/tears/holes anywhere does it?
Were you able to get a pic of the passenger side cowl piece? Also, is the gas pedal assembly a cable setup or an electronic setup? If electronic, could u get me a pic of it? My truck is throwing a Throttle Position Sensor code. Im gonna pass on the visors and the K&N filter. |
All times are GMT -4. The time now is 11:43 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com