Refurbishing Dog Dish Hubcaps
2 Attachment(s)
I managed to paint the yellow bowtie blue for my 72 super. A few members suggested the 'Krylon True Blue' and it turned out very nice. Overall the cap is good for my needs. However, does anyone know if there is a pattern for painting the black on these? Free hand taping is out for this guy. It looks to be more of a satin black then gloss. I lucked out a pair of NOS and the black is somewhat dull on those as well. Thanks in advance.
|
Re: Refurbishing Dog Dish Hubcaps
I don't know if there is a pattern available or not....I'm sure someone could make one, but I just masked mine off. I used some 1/8th" detail tape for the outline, and the used wider tape on that with paper to cover everything else.
I used SEM Satin Black... |
Re: Refurbishing Dog Dish Hubcaps
1 Attachment(s)
I took mine to my signpainter and he painted them with a brush.
|
Re: 64-66 front k1o hubcaps
Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here
If you need any further assistance with that please contact any Admin for help. |
Re: Refurbishing Dog Dish Hubcaps
Thanks guys. Slikside - is your avatar picture one you painted? If so they look really sharp. Sicklajoie- brush work looks very nice. Cant tell from the picture it was brushed.
|
Re: Refurbishing Dog Dish Hubcaps
|
Re: Refurbishing Dog Dish Hubcaps
I ordered some scotch artist tape. I think its 1/8" - hopefully I can use that around the black edges and tape up from there. Thanks firstowner for the link. Maybe when I have some more time I will try the compound to make a form.
|
Re: Refurbishing Dog Dish Hubcaps
Quote:
|
Re: Refurbishing Dog Dish Hubcaps
Quote:
|
Re: Refurbishing Dog Dish Hubcaps
Trust me, you will be much more careful and diligent when removing and installing them!
|
Re: Refurbishing Dog Dish Hubcaps
1 Attachment(s)
I taped a hubcap up to see how it would turn out. Not near perfect, but good enough now I have to tape the other three I guess. The tape pulled a little bit around the center outer ring, but I should be able to touch it up. I used scotch 1/8" artist tape. It worked well and was flexible enough I didn't go out of my mind.
|
Re: Refurbishing Dog Dish Hubcaps
1 Attachment(s)
I use this 1/4" 3M tape, it works very well.
Available on Ebay for 11 or 12 bucks shipped. |
Re: Refurbishing Dog Dish Hubcaps
Quote:
|
Re: Refurbishing Dog Dish Hubcaps
Quote:
|
Re: Refurbishing Dog Dish Hubcaps
Quote:
|
Re: Refurbishing Dog Dish Hubcaps
The tape above is 3M 06405 1/4" vinyl tape , very nice tape to work with.
Thanks |
Re: Refurbishing Dog Dish Hubcaps
Your cap turned out nice! Do you need to paint the black on the two NOS caps? Couldn't you put both of them on the drivers side- if you're worried about the sheen matching
|
Re: Refurbishing Dog Dish Hubcaps
Is it even possible to polish out the metal part? Chrome is pretty hard. I always assumed it was either replate, live with them, or the "brushed metal" look being your only options.
So painting aside, can they be refurbished on the metal part without replating at all? |
Re: Refurbishing Dog Dish Hubcaps
If you were to have a painted set chromed, would you be able to paint over the chrome for the chevy logo etc?
|
Re: Refurbishing Dog Dish Hubcaps
Quote:
|
Re: Refurbishing Dog Dish Hubcaps
Crewcab65 - ordered some tape -thanks.
drewbert41 - i would assume you could paint over the chrome - not sure. Im not much of a painter. Davepl - Im in the live with it boat. My truck is nice, but not a show truck. The rims will probably be too clean for the truck when they come back from the powdercoat shop. I was worried about the black being too shiny so I used a satin. I thought flat would be to dull. Im pretty happy with the shades. |
Re: Refurbishing Dog Dish Hubcaps
|
Re: Refurbishing Dog Dish Hubcaps
rharris, you did a really nice job!
|
Re: Refurbishing Dog Dish Hubcaps
thanks sicklajoie. i'll probably finish the rest next week. Hoping the wheels come back tomorrow. i'll post some pictures of before and after.
|
Re: Refurbishing Dog Dish Hubcaps
4 Attachment(s)
Finished the final hubcap last night. The tape I used is listed below. I used the 1/8" around the black and bowtie and then I used the 1" frog tape to build out from that and then newspaper. I tried the 1/4" but I preferred the 1/8"; it seemed to flex better. It took some time taping them up, but it was worth it. After I pulled the tape, I used an Xacto knife to scratch off any spots that the paint bled. The paint used was Krylon Dual Superbond.
Black - Krylon Dual Superbond Black Satin $5 Blue - Krylon Dual Superbond True Blue Gloss $5 1/8" tape - Scotch Artist Tape for Curves (FA2038) $5 1/4" tape - Scotch Plastic Tape (3M 6405) $13 1" Tape - Frog Tape .94" (1358463) $10 |
All times are GMT -4. The time now is 01:00 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com