Re: Power Brake Booster Adapter Bracket
 

I saw in another thread, someone had posted a whole sheet of GM PRO numbers for brake boosters. The JM3 reads booster, brake, 240mm high flow, while the JM5 reads booster, brake, 200mm high flow. I'm not sure what difference the milometer size has to do with anything. Also, would it be better to grab one of these boosters off of a early 2000's S-10 at the junk yard, or would it be better to buy one at a local parts store like NAPA, etc??

Re: Power Brake Booster Adapter Bracket
 

I looked for an edit feature, couldn't find one. Anyway, RPO not PRO. I saw quite a few of the JM3 boosters in a local hard in early 2000's S-10 blazers. How much of a PITA are they to pull out of the truck?

Re: Power Brake Booster Adapter Bracket
 

I can't answer the other questions, but if you're asking if better to buy used or new....I'd think everyone would say New. Unless your funds don't allow. Mine is from a c1500, forget the year.

Re: Power Brake Booster Adapter Bracket
 

Which is better, new or used, depends on your preference and budget. With a rebuilt one, you will need a core or pay the core charge. Pulling a used booster can take some time as there is quite a bit that needs to be removed before you can get to the nuts on the studs and the pushrod on the brake pedal. You will need a long extension or two and a swivel socket or a universal joint.

Re: Power Brake Booster Adapter Bracket
 

The money doesn't bother me either way. I just wasn't sure if buying one from NAPA or another parts store was better or worse, based on it seems like replacement parts are sometimes pretty ****ty these days.

Re: Power Brake Booster Adapter Bracket
 

Personally I'd worry about how long the thing say and if the diagram is therefore cracked on used.

Re: Power Brake Booster Adapter Bracket
 

In my experience the original GM boosters can last a long time. Hook one up to engine vacuum and see if it holds vacuum. If so, the diaphram is good.

Re: Power Brake Booster Adapter Bracket
 

I was wondering if you ship internationally? And how much it is for the 67-72 booster bracket with hydraulic clutch conversation

Re: Power Brake Booster Adapter Bracket
 

Yes I ship worldwide. The price for the '67-'68 or '69-'72 booster bracket with the hydraulic clutch conversion is exactly the same as in post #1 of the for sale thread seen here.

http://www.67-72chevytrucks.com/vboa...d.php?t=652871

Shipping that large box to Canada is quite expensive. The shipping alone is about $64.00 USD. Many of my Canadian customers have a delivery address just this side of the border.

Re: Power Brake Booster Adapter Bracket
 

Being a fabricator I was a little hesitant to buy something I could make myself with a little effort. I received my adapter bracket (powder coated) in the mail and was very impressed with the quality of the bracket. Packaging, weld and powder coat quality was second to none. Thanks for supplying a quality product!

James McGrew
Owner
Madison Street Hot Rods

Re: Power Brake Booster Adapter Bracket
 

Thank you for the compliments and I appreciate the purchase :)

Re: Power Brake Booster Adapter Bracket
 

I'm interested in this bracket. It makes for a very clean setup. I do have a question. I have a factory tilt column that I bought from Kevsclassics. Looking at where the shift arm is in relation to the center-line of the brake push rod, an 8" dual booster might be a tight fit.

Can anyone confirm that an 8" dual booster such as the Inline Tubing unit http://r.ebay.com/dYzdyl will fit with the factory tilt column shift arm?

Thanks!

Re: Power Brake Booster Adapter Bracket
 

From what info I have received from a couple past customers, you must use a booster that is smaller than 10" in diameter. If it were me, I would go with a 9-9.5" diameter dual diaphram booster.

Re: Power Brake Booster Adapter Bracket
 

Captainfab,

Received my bracket today, thank you for the speedy delivery and a beautiful product. I'll post pictures of it installed after paint. Thank you again!!

Re: Power Brake Booster Adapter Bracket
 

Finally got everything mounted, thanks again Captainfab!!

Re: Power Brake Booster Adapter Bracket
 

Thanks for posting a couple pics. :)

Re: Power Brake Booster Adapter Bracket
 

All of my booster brackets now come with slotted booster mounting holes to also accept aftermarket universal boosters with the 2-3/8" x 2-3/8" center to center mounting studs.

Re: Power Brake Booster Adapter Bracket
 

PayPal sent for powder coated bracket. Thanks!

Re: Power Brake Booster Adapter Bracket
 

PM sent

Re: Power Brake Booster Adapter Bracket
 

Pay pal sent

Re: Power Brake Booster Adapter Bracket
 

Payment received for a powder coated standard '67-'72 booster bracket.

Re: Power Brake Booster Adapter Bracket
 

I am officially notifying everyone that I will be on vacation from 02-05-18 thru 02-13-18. I will do my best to get all orders built and shipped before I leave, if placed by 01-31-18. Orders placed while I am gone will be built and shipped in order of receipt of payment once I return. Thanks for understanding.

Re: Power Brake Booster Adapter Bracket
 

Hello I would like to purchase an adapter bracket, how much would it cost for a powder coated one shipped to 92870?

Re: Power Brake Booster Adapter Bracket
 

The price is Exactly the same as in post #1 of this for sale thread........$77.65

Re: Power Brake Booster Adapter Bracket
 

Sorry I forgot ask about the hydroboost mount plate as well