Need help with bolt size
2 Attachment(s)
I am finally installing my steering column and I don't have all of the bolts. I have the brackets, but not the bolts. I am trying to figure out what size the bolts are that hold the bracket that the lower part of the steering column straps to just outside of the passenger compartment, below the master cylinder. I have circled the holes in blue ink on some pictures I had. Can anyone help me here?
Thank you in advance. |
Re: Need help with bolt size
This might help: http://67-72chevytrucks.com/vboard/s...&postcount=173
|
Re: Need help with bolt size
|
Re: Need help with bolt size
Column cover (engine side): The column cover mounts over a portion of the toe pan seal. The cover mounts to the firewall using:
• One (GR 5) 1/2" hex bolt and lock washer. The bolt thread is 5/16-18 x 1.1/2, of which 1/2" is shaft. This bolt also secures the brake booster bracket. The column cover slides underneath the booster bracket. NOTE: The bolt head is stamped "ROCKFORD". • One (GR 5) 1/2" recessed hex tapered bolt with a 1" OD integrated washer. The bolt thread is 5/16-18 x 7/8. NOTE: The bolt head is stamped with an anchor. Very cool bolt BTW, it's not a flange head like most recessed bolts:chevy: |
Re: Need help with bolt size
Im going out to see if my bolt heads have all those markings
|
Re: Need help with bolt size
Quote:
|
Re: Need help with bolt size
Thanks DeadheadNM and 71CHEVYSHORTBED402. That definitely helps!
|
All times are GMT -4. The time now is 03:23 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com