The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 99-06 GMT800 Chevy and GMC Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=58)
-   -   Ride height (https://67-72chevytrucks.com/vboard/showthread.php?t=781763)

STOCKISH 02-19-2019 10:29 AM

Ride height
 
Hey fellas. So I sold a 2007 Silverado classic a good while ago, it was 2wd and level from the factory. I just purchased a 2004 sierra 2 Wheel Dr. which is significantly lower in the front. I would like it to sit level like the Silverado did. Are there different coil springs? I’d love to use factory stuff not an aftermarket lift kit if possible.

Palf70Step 02-20-2019 06:49 AM

Re: Ride height
 
Different engine combos had different spring rates. I know my 02 Silverado and 06 Sierrra, both WT models with V6s set lower than my 07 classic Silverado with a 4.8 V8

kev2809 02-27-2019 08:47 AM

Re: Ride height
 
ya its annoying. my 02 sits lower in front compared to just about every nbs i get next to. even thought about putting a level spacer up front just to get it up some.

its an ext cab 4.8 v8 2wd

bigd65 06-15-2019 04:53 PM

Re: Ride height
 
I put 2 inch lift springs on the front of mine. Then tried to put regular dampening shocks rather than Bilsteins. The regular were not long enough. I want to remove the Bilstiens for regular dampening shocks because the w in lift springs are firmer than factory.

bigd65 06-15-2019 05:03 PM

Re: Ride height
 
Maxtracs


All times are GMT -4. The time now is 04:00 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com