The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 3 of 101 12 3 456781353 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Alternate Tinkerings (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=140)
-   -   '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... (https://67-72chevytrucks.com/vboard/showthread.php?t=332026)

tdave00 03-11-2009 03:06 AM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
Dude! Just wanted to say "thumbs up"! If you were working on a lawnmower it would be interesting.

454_72_4X4 03-11-2009 03:31 AM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
Just subsrribing to this thread too, so I can watch the fab work! Gonna be a cool little car!

Rokcrln 03-11-2009 07:20 AM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
Looking good Mike but stop stealing parts from the Hoe (trailer fenders) because I need you to finish yours so I know how to finish mine;) Keep it up that is going to be one sweet sleeper!

Kevin
LFD Inc.

Frizzle Fry 03-11-2009 09:06 PM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
Quote:
Originally Posted by Jvsapp (Post 3191168)
i just was looking through the posts again and noticed you modified the wheel well significantly. does this mean you will have to modify the rear seat too? as MSGROSS said someone's gonna get a sore arse :D
I will make/weld-in covers for the upper links. The covers will be about 1.5-2" above the seat pan. I will then adjust the seat springs/wires accordingly. There should still be plenty of cushion room there. The seat back will be mod'ed for the micro-tubs too. When it's all said and done the mods will not be visible and hopefully won't affect passenger comfort. It certainly won't be affecting mine. ;)
Quote:
Originally Posted by Rokcrln (Post 3191320)
Looking good Mike but stop stealing parts from the Hoe (trailer fenders) because I need you to finish yours so I know how to finish mine;) Keep it up that is going to be one sweet sleeper!

Kevin
LFD Inc.
Those are leftovers. No project cannibalization here! That's why the LS1 is still sitting in the 61. Believe me the temptation was hard to resist... :mm:

Jvsapp 03-13-2009 05:08 AM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
resist the temptation.......... but cool beans with the seat. i cant' wait till its streetable.

my67chevytruck 03-13-2009 09:30 AM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
sweet project, and progress.

ERASER5 03-13-2009 05:32 PM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
What are you planning to paint the D-44 with? I know you are not at that point yet, but I figured you had a plan.

Frizzle Fry 03-13-2009 09:12 PM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
Quote:
Originally Posted by ERASER5 (Post 3195669)
What are you planning to paint the D-44 with? I know you are not at that point yet, but I figured you had a plan.
Black POR-15

ERASER5 03-13-2009 10:29 PM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
Thanks.

Sub-versive 03-14-2009 06:40 PM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
Mike I am truly in awe of your fab skills! :smoke:
Both vehicles are amazing!

I can't wait to see the car (and the Hoe) finished! :metal:

Frizzle Fry 03-18-2009 07:07 PM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
3 Attachment(s)
Been really busy over the last two weeks with work and school so I've had no shop time. I did manage to get two wheels repaired (had bent lips), and new tires mounted. First pic is the worst of the two wheels. Both are now as good as new. I cannot find any sign of it.
The tires are yoko s-drive 235/40/17 all 4. I'm attaching these since my photobucket bandwidth limit has exceeded for this month (resets on the 21st).

Jvsapp 03-19-2009 01:45 AM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
YAY new CORN :D i'm gonna post some of my latest project. 20V swap into my daily driver in the others forum too.

russellmarling 03-19-2009 09:54 PM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
This is the coolest, most original project that I've seen in a long time. It is mind blowing how well thought out and engineered your projects are. 100 points for taking the road less traveled. You are going to love those S-Drives. I just put a set on my Camaro and they are excellent.

Frizzle Fry 03-20-2009 01:14 AM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
3 Attachment(s)
Quote:
Originally Posted by Jvsapp (Post 3206024)
YAY new CORN :D i'm gonna post some of my latest project. 20V swap into my daily driver in the others forum too.
I'll check it out.
Quote:
Originally Posted by russellmarling (Post 3207587)
This is the coolest, most original project that I've seen in a long time. It is mind blowing how well thought out and engineered your projects are. 100 points for taking the road less traveled. You are going to love those S-Drives. I just put a set on my Camaro and they are excellent.
Thanks brotha! I'm happy with the way it's headed. I researched tires for this and ended up going with the s-drives based on the countless rave reviews they received. Good to hear another one!

I got a couple things done today. Painted the radiator brackets (I'll show them installed soon). I cut out the PS rear WW for the nano-tub. And, I had to see how those new road grippers looked on there. I still need to clean/polish the wheels...

Frizzle Fry 03-20-2009 01:18 AM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
1 Attachment(s)
One more. The hood is back on to check rad clearance:

Jvsapp 03-20-2009 01:22 AM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
i think the wheels look good as is. non polished = more sleeper :D same with dirty wheels.

CG 03-20-2009 01:43 AM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
Had to give you some rep points for all the knowledge and inspiration you bring to the site...Thanks a ton!!!

This little car is going to be killer on the street.

joe231 03-20-2009 08:21 AM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
Quote:
Originally Posted by Sub-versive (Post 3197269)
Mike I am truly in awe of your fab skills! :smoke:
Both vehicles are amazing!

I can't wait to see the car (and the Hoe) finished! :metal:
don't forget the Vette-truck ;)


those wheels and tires look so nice on there :metal:

Mister laugh 03-20-2009 11:27 AM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
Wow i can't believe your projects they are so, well done. Your tahoe is what pushed me over the edge in wanting a 67-72 in the first place(I always wanted one I went and bought one after seeing the tahoe), and now this.

454_72_4X4 03-20-2009 02:10 PM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
I just wanna know if ya buy cutoff/grinding wheels buy the case or truckload! Hahaha

Looking good!

FRENCHBLUE72 03-20-2009 05:30 PM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
Wow.....

Jvsapp 03-21-2009 12:51 AM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
hey mike,

i found a way around the bandwidth exceed from Photobucket. open another account using a different email address like a yahoo or something. then you can double up the posts and not worry about exceeding your limit. i know your photo archive on Photobucket is HUGE so that might help splitting the difference in 2 places?

if you look at some of the pics i posted they come from 2 different photobucket accounts. i think im gonna post my nova's build up too. that way i can test the limits of the bandwidth too :D

-JV

Frizzle Fry 03-21-2009 12:59 AM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
Quote:
Originally Posted by Jvsapp (Post 3209682)
hey mike,

i found a way around the bandwidth exceed from Photobucket. open another account using a different email address like a yahoo or something. then you can double up the posts and not worry about exceeding your limit. i know your photo archive on Photobucket is HUGE so that might help splitting the difference in 2 places?

if you look at some of the pics i posted they come from 2 different photobucket accounts. i think im gonna post my nova's build up too. that way i can test the limits of the bandwidth too :D

-JV
I've thought about that but a friend of mine offered some server space so if I migrate anything it will be in that direction. Thanks for the suggestion. You know we also have photo hosting here too.

Jvsapp 03-21-2009 01:08 AM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
Quote:
Originally Posted by Frizzle Fry (Post 3209693)
I've thought about that but a friend of mine offered some server space so if I migrate anything it will be in that direction. Thanks for the suggestion. You know we also have photo hosting here too.
true, but i also post crap on other forums too so i'd rather have all the pics in one place and then i can distribute accordingly. it's free so i figure i tie up space on their free service and keep this board clutter free ;)

Frizzle Fry 03-21-2009 01:10 AM
Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...
 
Quote:
Originally Posted by Jvsapp (Post 3208014)
i think the wheels look good as is. non polished = more sleeper :D same with dirty wheels.
:lol: true
Quote:
Originally Posted by CG (Post 3208030)
Had to give you some rep points for all the knowledge and inspiration you bring to the site...Thanks a ton!!!
This little car is going to be killer on the street.
Thanks man! How's the panel?
Quote:
Originally Posted by joe231 (Post 3208227)
don't forget the Vette-truck ;)
those wheels and tires look so nice on there :metal:
Funny thing is I hated them on the Tahoe...
Quote:
Originally Posted by Mister laugh (Post 3208459)
Wow i can't believe your projects they are so, well done. Your tahoe is what pushed me over the edge in wanting a 67-72 in the first place(I always wanted one I went and bought one after seeing the tahoe), and now this.
Thant's awesome! Glad I could help :)
Quote:
Originally Posted by 454_72_4X4 (Post 3208703)
I just wanna know if ya buy cutoff/grinding wheels buy the case or truckload! Hahaha
Looking good!
I should...
Quote:
Originally Posted by FRENCHBLUE72 (Post 3208992)
Wow.....
hah, anyone can mock one up... ;)


All times are GMT -4. The time now is 06:02 PM.
Page 3 of 101 12 3 456781353 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com