lets see your trick mods and custom touches!!
 

lets see some of you coustom touches and trick mods on your trucks
door handles, dashes, lights, body mods, fuel doors, etc. anything you want to show !

Re: lets see your trick mods and custom touches!!
 

Did the sidemarker fuel door. Took some southern engineering, but it works! and built a little box that bolts inside the bed to cover it up. Now... we'll see just how tight it is when i try and fill 'er up!

Re: lets see your trick mods and custom touches!!
 

how do you get that cap out is there enuff room to get out

Re: lets see your trick mods and custom touches!!
 

Aftermarket tach and mid 80s clock in the dash.
Transmission temperature gauge and aux. fuel tank gauge. The middle button is for my back up lights - which overrides the surge brakes on my trailer.
Just to the left of my knee-knocker tranny and aux fuel gauges is my aftermarket cruise control. I don't have a good picture of that on this computer.
Oh that non-AC temperature control was swapped out a couple of years ago. I have all the firewall mods done for AC. All I need to do is cut a few holes in my dash, hook up a compressor, suck the air out, and charge the system.

4wd, tach, built-in clock, tranny temp, cruise control, AC. What is that in today's new market with a standard cab and 8-foot box? $20k? $25k? I'm sure liking my payments of $0 month and 0% interest.

Re: lets see your trick mods and custom touches!!
 

I added these over this winter

Re: lets see your trick mods and custom touches!!
 

I'm kinda proud of this :D

Re: lets see your trick mods and custom touches!!
 

70blowngmc: It has to come out at an angle with a little turn. Barely enought room. whats going to be tough is here in CA, most gas pumps have a big ol rubber boot around the nozzle. I'm keeping mental notes of the places that don't so that i know where i can go!

Re: lets see your trick mods and custom touches!!
 

Here is my interior with a converted van tilt, Autometer Phantom Gauges, seats from a 98 or 99 Silverado and door panels that I made to match the seats.

http://yukon.b0xen.us/69chevy/steeringcolumntilt07.jpg

http://yukon.b0xen.us/69chevy/interior09.jpg

http://yukon.b0xen.us/69chevy/seatsp9300004.jpg

http://yukon.b0xen.us/69chevy/doorpanels01.jpg

Also have a custom gas tank built by fuelcellguy on the flatbed. Filled in the stock gas filler hole on the cab.

http://yukon.b0xen.us/bbproject/69chevy67.jpg

Re: lets see your trick mods and custom touches!!
 

Since I didn't want to distract from the restored look of my interior, I had a custom panel built to mount my air ride controls. The sitches are monuted in this cool stalk that fits flush against seat. The digital gauge is hidden in the ashtray...:)

Re: lets see your trick mods and custom touches!!
 

You can buy a gas cap that doesn't have to be removed. It has a hole to put the fuel nozzle in and it's spring loaded so gas won't leak out.

May not work for your cali pumps?

Here's a pic and I got it from this thread:

http://67-72chevytrucks.com/vboard/s...ad.php?t=77104

http://67-72chevytrucks.com/vboard/a...1&d=1089168154

Re: lets see your trick mods and custom touches!!
 

whats that in your ash tray???

Re: lets see your trick mods and custom touches!!
 

White faced gauges and a custom console to house my cd player and hold sodas.
http://memimage.cardomain.net/member...88_58_full.jpg

Re: lets see your trick mods and custom touches!!
 

My gauges and 3rd brake light.....

Re: lets see your trick mods and custom touches!!
 

I'd like to see some more pics of this. Are they functional? Where did you get them? :phat:

Re: lets see your trick mods and custom touches!!
 

Pics will follow later, but I'm in the process of doing the following to my 69 right now:

Swivel reclining bucket seats
Aftermarket A/C
Custom Stereo (250 watt Amp, 12" subs where fuel Tank was because it's going out back).
Custom Center Console with B&M shifter
MP3 player in dash
18 Ckt [almost] Painless fuse panel.
Elect Windows and Door Locks
Cargo/3rd brake light combo install.

Here's a picture of the gage cluster with air/fuel ratio gage added.

Re: lets see your trick mods and custom touches!!
 

YukonJack - GREAT interior. Door panels are some of the best I have seen when not using stock style upholstry.

No pictures but my 2 "custom" mods are 68 Olds park lights (they match the 67/68 grill hoops with anodized aluminum bezels and clear lens and the 2nd mod is the 65 Chev heater control which looks just like the AC unit without the blower switch.;)

Bob

Re: lets see your trick mods and custom touches!!
 

I saw these on a 07' Buick Lacerne, and ordered some from GM, and after MUCH MUCH deliberation decided they should be installed. One of a kind for sure. Plans are to indeed make them useable, after all I have already cut the fenders to get them on. Those are my winter white spokes, the bling wheels are in their jammies.

Re: lets see your trick mods and custom touches!!
 

im doing the same thing but as a full length console. how did you make the cup holders ???

Re: lets see your trick mods and custom touches!!
 

Here is what I have done, Well here is what I thought about doing, I mean here is what some other guy did, Sorry I got nothing!:(

Kevin
LFD Inc.

Re: lets see your trick mods and custom touches!!
 

So far N2TRUX takes the cake with that trick setup! Nothing in my yard is that far off the chain. I tucked my stereo in the glovebox of both trucks and added a Camaro tach to the dash as well. Pretty typical fare I guess.

http://i5.photobucket.com/albums/y18...0/100_0394.jpg

http://i5.photobucket.com/albums/y18...0/100_0395.jpg

Re: lets see your trick mods and custom touches!!
 

All I have done is make a mount for speakers to fit under my bench, as I don't want to cut up my doors or kickpanels. It's decent but nothing worth showing off. Some really nice ideas here though.

Re: lets see your trick mods and custom touches!!
 

Mod'd auto van tilt (thanks to Yukon Jack), newer model steering wheel, and the ole' glove box instrument panel. The empty hole is going to get fitted with air pressure for oba.

Re: lets see your trick mods and custom touches!!
 

well so far ive mounted my tach in the old shifter position got flames on my cowl hood was going to mount my ignition like that but decided to mount it on the dash right above the E-brake handle the door panel is where I covered it with tweed I also made a dash cover in tweed as well and the little bolts go in the holes where a licence plate would go on my truck i just turned em down in the drill press

Re: lets see your trick mods and custom touches!!
 

The digital pressure gauge for the air suspension. Thanks, but I can't take credit for it. I told Roger at Stoked Out Specialties what I wanted to accomplish, and that's what he came up with...:)

Re: lets see your trick mods and custom touches!!
 

New badge to match engine.