Originally Posted by Justinmac (Post 6054190)

My 86 Wrangler I bought today

Originally Posted by chevy-fun (Post 4797777)

What size rim/tire nice truck think I've seen u few times in agg driving around
Posted via Mobile Device

Originally Posted by Slim Pickins (Post 6060469)

Attachment 1104591

Here is my truck my Dad and I are starting to work on. We have a long way to go.
Posted via Mobile Device

Originally Posted by y5mgisi (Post 6062439)

Very pretty.

Originally Posted by bohmankid (Post 6063284)

papa kent, that truck is a BEAUTY!!!

Originally Posted by mkdesign (Post 5869981)

thanks. Not sure exactly how much the truck went down but i did an axle flip in the rear and cut the front a full 2 coils . I was able to move the top a-arms out enough to get my camber back to normal. The truck still drove well with one exception. My axle would hit the frame on any moderate bumps. I was going to c-notch it until i realized that the center section of the rear would hit the bed floor. That was not going to cut it because when i first got my truck home and took out the bed liner i was greeted with a perfect bed! I mean not a mark except where the paint was rubbed a bit. Zero rust and not a dent anywhere!

Attachment 1055547


i really liked the look of the truck as a 3/4, steel wheels, hub caps and all but for a better ride and better wheel selection i picked up a 1/2 ton parts truck for free and purchased a set of 3/4 ton to 1/2 ton, 2 1/2'" dropped spindles from early classic industries with the stock coils cut 1 1/2 turns. Used the 1/2 ton rear springs with flip. So i'm i'd say that it's down about 8" from stock.

Originally Posted by 79c10350 (Post 6048842)

just put some new tires on my daily

before:
http://i737.photobucket.com/albums/x...AEF361BA7A.jpg

after:
http://i737.photobucket.com/albums/x...AEFFD49DE0.jpg

Originally Posted by Justinmac (Post 6054190)

My 86 Wrangler I bought today

Originally Posted by Justinmac (Post 6054190)

My 86 Wrangler I bought today