the panelburb getting cut up
 

I will be cutting this one up pretty soon. I suspect there is a lot of bondo bc there is a lot of rust in this thing so I will have to check it out as we go. Cuts will start at $25 plus shipping and go from there. I have already gutted most of this but let me know what else you might need and I will see if I can help out. The front 3 doors have some rust in them but does not appear to be too terrible. The barn doors are shot and the lock pawl is already gone. I believe the front doors are 67 model (at least the wing windows)

Would like to keep the hinges with the 3rd door for now.

All of the glass was custom tinted (inside the glass) it is not removable but several of them are broken.

Would like to sell the frame as one if possible. It has 6 lug front disc brake conversion, set up for automatic & BB and I "think" it has a posi 6 lug rear. Still need to pull cover on that to verify. No title or vin available for the frame.

B pillar is SOLD
.

Re: the panelburb getting cut up
 

More general pics


.

Re: the panelburb getting cut up
 

6-10


.

Re: the panelburb getting cut up
 

11-15


.

Re: the panelburb getting cut up
 

16-20

.

Re: the panelburb getting cut up
 

21-25


.

Re: the panelburb getting cut up
 

26-30


.

Re: the panelburb getting cut up
 

A lot of the stuff I have already pulled from this is already listed in this thread

https://67-72chevytrucks.com/vboard/...d.php?t=786921


.

Re: the panelburb getting cut up
 

I have not pulled the headliner or bows yet so will wait to list them until I can determine condition of them. It looks like original headliner panels that have been covered over with fabric

Re: the panelburb getting cut up
 

Few more pics


.

Re: the panelburb getting cut up
 

If you cut the pass. Side B piller out? How much for that? How much for third door complete with hinges?
Posted via Mobile Device

Re: the panelburb getting cut up
 

If for some reason Clayton passes on this, I’d be interested next. Well just the b-pillar

Re: the panelburb getting cut up
 

I gotta leave early to head out on the road but will get it all figured up when I get back this afternoon

Thanks Richard
Posted via Mobile Device

Re: the panelburb getting cut up
 

Clayton

B pillar is $150 plus shipping I can cut where ever you need

3rd door minus door panel but including hinges $160 plus shipping

Probably cost more to ship on this than what it would cost you to make a trip down

I could leave the door attached to the B pillar so your gaps are already set :lol:

Can you email me pics of the door and rust and of the b piller? No shipping I’ll make the drive down and visit with ya. Thanks old friend

Clayton
Posted via Mobile Device

Re: the panelburb getting cut up
 

Give me a lil bit to get it off and check it real good. Been crazy here at work last couple days

I’m in no rush at all.. just figured a spare set up wouldn’t hurt to have around.. take your time
Posted via Mobile Device

I’m in no rush at all.. just figured a spare set up wouldn’t hurt to have around.. take your time
Posted via Mobile Device

Re: the panelburb getting cut up
 

Clayton
Got a chance to look closer today. The B pillar looks to be in great shape. The only spot I have not checked yet is underneath. Will try to get something out there in the morning to lay on, had a lot of rain.

.

Re: the panelburb getting cut up
 

The 3rd door has some body filler in the lower section of the outside panel. Lot of surface rust along the bottom perimeter but the only hole is on the inside edge of the door closest to the lower hinge. It looks like it started as a drilled hole but has gotten away from that. It has a speaker hole cut as well. Two of the pics are looking at the inside bottom of the door. You can see a lot of surface rust but I do not see anything major. That may change with a blaster so I will let you decide

.

Re: the panelburb getting cut up
 

A few more pics

.
Attachment 1909871

Attachment 1909872

Speaking of blaster..... While out there I thought I was losing my mind but it sounded like a shotgun went off and I got hit in the back with something. I looked around and did not see anything at 1st. I was looking for somebody not something. This is what I found. This is the rolling frame from the burb I got from you. Any warranty on them tires? :lol::lol: Luckily I have a spare :lol:

Attachment 1909873

Attachment 1909874

Attachment 1909875

Re: the panelburb getting cut up
 

Richard, any chance of getting a foam sound deadener from one of the roof supports? I have either tossed mine, or misplaced them. Trevor

Re: the panelburb getting cut up
 

Man Richard that tire is crazy.. and to think I drove it around my property before disassemble. Glad your safe but I do believe the 10 day warranty is expired.... 😬 but I think I’m gonna pass on the pillar and door. Currently getting my square ready for resale and the axle swap motor swap is eating my funds up quicker than expected. Thanks for taking the time to get the pics
Posted via Mobile Device

Re: the panelburb getting cut up
 

Since Clayton is passing, have you had an opportunity to get underneath it yet? Rain has been crazy here also, I’d like to see the underside where it bolts to the floor support since I see rust lines on the exterior paint down low. Thank you.