The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What did you do to your truck today? Chapter II (https://67-72chevytrucks.com/vboard/showthread.php?t=612422)

ole dollor 02-10-2014 06:46 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by ItsRandy (Post 6518158)
Put wood in the bed of my truck. Lots of nuts, blots and washers!

that is really looking good. like the color.

Lou Boffa 02-10-2014 07:33 PM

Re: What did you do to your truck today? Chapter II
 
beautiful. Yup, if I ever do a bed again, I'm taking it off the truck and standing it up...for sure!

Ridgeclimber 02-10-2014 11:51 PM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Attachment 1213108I got my step side box all disassembled and started stripping the box sides.

cafetony 02-11-2014 12:46 AM

Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
shifter install
Attachment 1213143

Attachment 1213144

VWNate1 02-11-2014 01:37 AM

Re: What did you do to your truck today? Chapter II
 
I visited it in the body shop , the 1936 Rolls Royce got finished and was leaving as I arrived so hopefully Guillermo will soon begin to work on it .

Mike_The_Grad 02-11-2014 03:11 AM

Re: What did you do to your truck today? Chapter II
 
3 Attachment(s)
Disassembly and cleaning.hopefully paint tommorow.really excited for the results.

magwakeenercew2jh 02-12-2014 07:11 PM

Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
Picked up my heads from Redman's Machine in Oakhurst today. Newly refurbished 062 heads with new 1.94/1.60 valves,
new springs, and and the shop's pocket porting.

I took the heads in with the old springs, rockers and valves still attached....$550.66.

I paid $300. The "Boss" settled up for the rest as a Valentine's Day
treat for me.

:gi:

Elliot949 02-12-2014 07:36 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by magwakeenercew2jh (Post 6522698)
Picked up my heads from Redman's Machine in Oakhurst today. Newly refurbished 062 heads with new 1.94/1.60 valves,
new springs, and and the shop's pocket porting.

I took the heads in with the old springs, rockers and valves still attached....$550.66.

I paid $300. The "Boss" settled up for the rest as a Valentine's Day
treat for me.

:gi:



Nice....

jmorri34 02-12-2014 08:55 PM

Re: What did you do to your truck today? Chapter II
 
4 Attachment(s)
Bought the complete wiring harness a new rear bumper and installation kit and a new grill shell. Got the rear bumper installed and gonna work on the grill this weekend!!:metal:

UNEASYRIDER 02-12-2014 09:14 PM

Re: What did you do to your truck today? Chapter II
 
STARTING OVER ON THE BODY WORK
http://i196.photobucket.com/albums/a...212_120126.jpg

Mike_The_Grad 02-12-2014 11:39 PM

Re: What did you do to your truck today? Chapter II
 
3 Attachment(s)
Ran the block number on my "new" motor...found out its not 350. Its 305. Same size block different bore. But its OK, because the mechanic that sold it to me is a standup guy. Im gonna get my money back and return the motor.I had already cleaned and primed it.oh well, more money towards my 350.also cleaned and painted inside frame rails and partial firewall. Also cleaned and painted trans member and motor mount brackets.picked up grade 8 bolts to reinstall both. New motor mounts came in. Received my '72 service manual I had ordered online.

74baggedbug 02-13-2014 11:18 AM

Re: What did you do to your truck today? Chapter II
 
Ordered all my parts for the cam upgrade.. Darn pesky lifter tap

magwakeenercew2jh 02-13-2014 08:41 PM

Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
Getting ready to install the fuel pressure regulator, I went out and looked at the fuel pressure gauge. it wasn't at 15, the way it seemed to be pegged on the last start-up.

It was at around 9.5. Just sitting there. No electric fuel pump "on"....So, first I pulled the gauge. It *did* move. To 7.5...while it was off. No pressure. There is a screw
at the back I figured was an adjusting screw. I adjusted it. No dice.

Couldn't get another one today, so I installed the fuel pressure regulator, hard and soft lines. Screwed the fuel pressure gauge back in. Fixed a couple of trouble spots.

I think it showed 12 when adjusted all the way out ("most clogged") while the ignition was on and the motor was not running. When I started it up, the gauge reads "9".
Guess I better get a new gauge.

Z10 02-13-2014 11:46 PM

Re: What did you do to your truck today? Chapter II
 
Started my ZZ4 with FIRST TPI, for the first time.

:ennyd:

Click on the photo to hear it run and click on my build thread to see more.

http://i20.photobucket.com/albums/b2...h_IMG_1095.jpg

:gmc2:

magwakeenercew2jh 02-13-2014 11:53 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by Z10 (Post 6524754)
Started my ZZ4 with FIRST TPI, for the first time.



OOOOooooH!

:metal:

ole dollor 02-14-2014 09:28 PM

Re: What did you do to your truck today? Chapter II
 
Z10..sounds good. looks good also. like it a lot....

jmorri34 02-14-2014 11:04 PM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Put the new grill on today!!

Towstrap 02-14-2014 11:46 PM

Re: What did you do to your truck today? Chapter II
 
went out back an checked on her

http://i2.photobucket.com/albums/y6/...42905Small.jpg

stepsider 02-15-2014 02:28 AM

Re: What did you do to your truck today? Chapter II
 
Started project Windows, Picked up the one piece window kit(no wing window) & started the the change over & mods. will post pictures later.













&

In The Ten Ring 02-15-2014 03:27 AM

Re: What did you do to your truck today? Chapter II
 
Wednesday, just as the big storm Pax was getting started, I mailed off my shipping payment to get my 1968 stepside spare tire cutout fender sent to me.

I'll have to figure out where to put that as my garage is pretty packed up.

Z10 02-16-2014 01:13 AM

Re: What did you do to your truck today? Chapter II
 
I drove it for the first time since June!
Click on the pic to see video.

http://i20.photobucket.com/albums/b2...tsnewpower.jpg

:gmc2:

stepsider 02-16-2014 01:42 AM

Re: What did you do to your truck today? Chapter II
 
3 Attachment(s)
1 piece window did pass door today

Unionwelder 02-16-2014 01:45 AM

Re: What did you do to your truck today? Chapter II
 
Pulled the column to fix the 3ott shift issues I've been having( no 2nd or 3rd gear), got that repaired and shortened the column length. Not sure how well the linkage is gonna fit but ill tackle that tomorrow.

BruthaMan 02-16-2014 07:51 AM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by Z10 (Post 6524754)
Started my ZZ4 with FIRST TPI, for the first time.

I could hear that all the way down here! Very nice. Guess I'm not the only one with a '72 tag in a hundred mile radius!

Lippyp 02-17-2014 11:47 AM

Re: What did you do to your truck today? Chapter II
 
Washed the winters green slime off her, hopefully this year I'll get some time to do some serious work on getting her back on the road. Been accumulating parts for years now.


All times are GMT -4. The time now is 02:56 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com