Scott's 1972 Chevy K-20. A place to start.
Truck History – Purchased April 1999
Yes, I have had the truck for a while now. During the past decade, I really haven’t done a lot to the vehicle. This started as a pretty generic truck, here’s a look at the SPID http://lh6.ggpht.com/_6w_GHAGYXhM/Sp...0/DSC_5014.JPG Over the years, I’ve replaced the wood bed, swapped out the engine, added a lift and tires, and installed A/C. Engine: GM Crate 350 HO Deluxe. HP = 330@5500 RPM TQ = 380@3800 RPM http://lh6.ggpht.com/_6w_GHAGYXhM/Sg...0/100_1955.JPG SM-465, NP-205 Combo, D-44 Front, Eaton H052 Rear, 4:10 Gears. Superlift 6” suspension lift (no blocks) Rancho Shocks & steering stabilizer 16x9 Steel Rock Rims with 315/75R16 Goodyear MTR tires. http://lh3.ggpht.com/_6w_GHAGYXhM/Sg...0/100_2111.JPG Since this current “build” isn’t about what has been done in the past, I’ll use that as a starting point. Today, she has the bed off as I’m in the process of swapping out the wood bed for a metal floor. I’ve also decided to try and learn how to do some primer and paint work. http://lh5.ggpht.com/_6w_GHAGYXhM/Sm...0/DSC_4802.JPG I’ll keep you posted as I go. |
Re: Scott's 1972 Chevy K-20. A place to start.
August 22, 2009
Today I got the first coat of paint applied to the truck. Sheri and I managed to sand the thing down last night, and got done just before the rain came. I was up first thing this morning, excited, as this IS my first paint job…. After 3 cups of coffee, making sure that I was good and “twitchy” (think Tweak from South Parkhttp://www.comedycentral.co.uk/files...1/20/tweak.jpg) I started. I went out and mixed up the paint… http://lh6.ggpht.com/_6w_GHAGYXhM/Sp...0/DSC_5009.JPG I then got my equipment on, up and running, and proceeded to paint the bed of the truck. Before I post the pictures, I need y’all to understand that this is not, nor will it ever be a “show truck.” My standard disclaimer is that I use this truck as a truck. Moving rock, going hunting or camping, or just general off-roading. I have no intention of removing every ding and scrape. I have personally earned all of those love marks on the truck, and intend to keep them. The other warning is that this is my first paint job. My experience with painting is contained in the three coats of primer that were shot and sanded before shooting the color. That being said……. Left Bed Front http://lh6.ggpht.com/_6w_GHAGYXhM/Sp...0/DSC_5010.JPG Left Bed Rear http://lh4.ggpht.com/_6w_GHAGYXhM/Sp...0/DSC_5011.JPG Right Bed Front http://lh5.ggpht.com/_6w_GHAGYXhM/Sp...0/DSC_5013.JPG Right Bed Rear http://lh4.ggpht.com/_6w_GHAGYXhM/Sp...0/DSC_5012.JPG The inside and top of the bed rails will be rhino-lined in the future, but I’m not decided if I’m going to have it done in the orange of if it’ll be in black. Thank goodness I don’t have to decide that today. I hope to have more pictures up tomorrow… second coat will go on Sunday morning. |
Re: Scott's 1972 Chevy K-20. A place to start.
August 23, 2009
Well, I got the second coat done today, and (after a brief drying) moved it out into the hot Arizona sun for its final baking. I’m very happy with the results of my first painting endeavor. Here’s some updated pictures. http://lh4.ggpht.com/_6w_GHAGYXhM/Sp...0/DSC_5028.JPG http://lh6.ggpht.com/_6w_GHAGYXhM/Sp...0/DSC_5029.JPG http://lh5.ggpht.com/_6w_GHAGYXhM/Sp...0/DSC_5031.JPG http://lh3.ggpht.com/_6w_GHAGYXhM/Sp...0/DSC_5032.JPG http://lh4.ggpht.com/_6w_GHAGYXhM/Sp...0/DSC_5033.JPG http://lh6.ggpht.com/_6w_GHAGYXhM/Sp...0/DSC_5034.JPG I also ordered all new lenses for my lights, so those should be here and ready for me to put the bed back on the truck this coming weekend. I’ll keep this updated. Thanks for looking. |
Re: Scott's 1972 Chevy K-20. A place to start.
August 24, 2009
Well I the shipping confirmation from LMC this morning. ORDER SUMMARY: ________________________________________ Order Date 08/22/2009 (Saturday) ________________________________________ Part # Description 36-4401 LICENSE LAMP ASSY W/STD BMPR 36-4254 BACK UP LENS-CLEAR-LH 36-4255 BACK UP LENS-CLEAR-RH 36-0523 BACKUP LENS GASKET 2 REQ 36-4270 TAILLIGHT LENS-RED 2 REQ 36-0520 TAILLIGHT GASKET 2 REQ 36-4450 REAR SIDEMARKER LAMP-RED 2REQ 36-4208 DOME LIGHT LENS-WHITE A-CB56 CB.56 CATALOG - SUMMER 2009 ________________________________________ The other thing that I did was starting to strip the rear bumper off. As I was sitting there looking at the bed of the truck, I realized that the poor, mostly white with rust and other spots bumper wouldn’t look that good. In this vast “friend of a friend” network that we all have, I’m two steps removed from a powder coater. I’ve decided to go with black bumpers in lieu of the white. No pictures of the bumper today. (It’s not nearly as exciting as the paint.) |
Re: Scott's 1972 Chevy K-20. A place to start.
August 29, 2009
Well, I got a couple of things done today. First off, I was able to get the bed mounted. My mom & step-dad had shown up on their way back up to Colorado, so I was able to get my step-dad’s help in getting the bed put back on. http://i934.photobucket.com/albums/a...n/DSC_5037.jpg After my folks left, I went ahead and put the new lenses in, rewired the electrical, and remounted the bottle opener. http://i934.photobucket.com/albums/a...n/DSC_5040.jpg http://i934.photobucket.com/albums/a...n/DSC_5041.jpg http://i934.photobucket.com/albums/a...n/DSC_5043.jpg This one makes me realize how much I need to do on the front after the Elk hunt in October. http://i934.photobucket.com/albums/a...n/DSC_5045.jpg http://i934.photobucket.com/albums/a...n/DSC_5046.jpg http://i934.photobucket.com/albums/a...n/DSC_5047.jpg And finally, I started stripping down the bumpers, getting them ready to go for powder coating this week. http://i934.photobucket.com/albums/a...n/DSC_5039.jpg This coming week, I’ve also got an appointment with the Line-X guys on Thursday. I think I’m going to go ahead and shoot the bed in black, as I can’t quite justify the $300 additional it would take to color match the vehicle. In addition to that, (and after listening to my wife and buddies Taz & Jeffica), I think I’m going to re-do the lower body line in black. I think the lining over the top, the lower body line in black & the black powder coated bumpers will look sharp in contrast to the orange. Anyway, that’s my updates for today. |
Re: Scott's 1972 Chevy K-20. A place to start.
Dude I have got to tell you that I love your truck. I am working on a 69 gmc 3/4 ton 4x4 and now am inspired to get back into the garage. Also congrats on the elk hunt what unit? :metal:
|
Re: Scott's 1972 Chevy K-20. A place to start.
Looks good
|
Re: Scott's 1972 Chevy K-20. A place to start.
Quote:
|
Re: Scott's 1972 Chevy K-20. A place to start.
Quote:
|
Re: Scott's 1972 Chevy K-20. A place to start.
August 31, 2009
Dropped the rear bumper and license plate inset dropped off at the powder coater. I used Affordable Powder Coating in Phoenix. 2111 W Filmore St Phoenix, AZ 85009 (602) 272-7646 Good guys to work with, and they’re friends of my buddy Taz. I hope to get it back next week, and I’ll mount it back up, give you pictures. |
Re: Scott's 1972 Chevy K-20. A place to start.
September 1, 2009
I finished stripping down the front bumper today. It’s loaded into the car, and ready to be dropped off when I get the call that the rear’s been done. http://i934.photobucket.com/albums/a...n/DSC_5048.jpg |
Re: Scott's 1972 Chevy K-20. A place to start.
September 2, 2009
I had shot an initial coat of primer on one side of my tailgate a while back. Knowing that I really needed to get it done and back on the truck before shooting the bed liner, I decided to crank that out today. http://i934.photobucket.com/albums/a...n/DSC_5049.jpg http://i934.photobucket.com/albums/a...n/DSC_5050.jpg http://i934.photobucket.com/albums/a...n/DSC_5052.jpg |
Re: Scott's 1972 Chevy K-20. A place to start.
September 3, 2009
<sigh> sanding, sanding & more sanding…… |
Re: Scott's 1972 Chevy K-20. A place to start.
Looks really good
|
Re: Scott's 1972 Chevy K-20. A place to start.
Quote:
|
Re: Scott's 1972 Chevy K-20. A place to start.
Yeah you cant do much better than orange
|
Re: Scott's 1972 Chevy K-20. A place to start.
September 4, 2009
Last night I was able to put the new coat of paint on the tailgate. I rushed a little bit, and ended up with two runs down the passenger side. Nothing a little more sanding won’t remedy. http://i934.photobucket.com/albums/a...n/DSC_5055.jpg http://i934.photobucket.com/albums/a...n/DSC_5059.jpg So, now it’ll be a matter of getting it reinstalled on the back of the truck. Let’s hope that Friday yields a little bit of time to work on it, somewhere in between work, Friday night & long weekend……. Y’all have an awesome weekend! |
Re: Scott's 1972 Chevy K-20. A place to start.
Looking good can't wait to get mine to be at this stage. My youngest daughter has laid her claim on the 69 so that gives me a year to get it respectable lol.
|
Re: Scott's 1972 Chevy K-20. A place to start.
September 27, 2009
Well, I have been a little bit neglectful in getting this updated in a timely manner as of late. I got the front and rear bumpers done. The powder coating turned out great, and I was very happy with the results. I decided to go with black instead of the original white or chrome. There’s something about having the items blacked out that mean business. I’ve seen far too many trucks that are all glitz and glam, and have yet to have the tires leave the road. Anyway, onward to the pictures: The freshly powder coated rear bumper: http://lh3.ggpht.com/_6w_GHAGYXhM/Ss...2/DSC_5168.JPG Getting my front lights on and working: http://lh4.ggpht.com/_6w_GHAGYXhM/Ss...2/IMG_0214.JPG Front shot, new bumper, new lights, new old plate: http://lh6.ggpht.com/_6w_GHAGYXhM/Ss...2/DSC_5165.JPG Left side, and note the new and improved, blacked out side view mirror: http://lh6.ggpht.com/_6w_GHAGYXhM/Ss...2/DSC_5166.JPG Another shot of the left side: http://lh4.ggpht.com/_6w_GHAGYXhM/Ss...2/DSC_5170.JPG Anyway, that’s it for the weekend…. See you again soon. |
Re: Scott's 1972 Chevy K-20. A place to start.
Quote:
There is something about this vintage K series that makes me drool. Your's looks like it means business. Nice job |
Re: Scott's 1972 Chevy K-20. A place to start.
Quote:
I know that you've put yours into limbo for a while, but I love seeing the "heavy" metal trucks. |
Re: Scott's 1972 Chevy K-20. A place to start.
Thank you Scott. That C30 should be back on the top of the list within a couple months. The plan is a diesel for it but it depends on what I come across at the salvage auction when the time comes. There always seems to be a couple early 90's Rams going through there as compared to GM stuff.
Richard |
Re: Scott's 1972 Chevy K-20. A place to start.
dude your truck is SICK
|
Re: Scott's 1972 Chevy K-20. A place to start.
Quote:
|
Re: Scott's 1972 Chevy K-20. A place to start.
Ok, 3 years later, I've started working on the cab rust repair. It's been a while, and this has stayed on the back-burner for quite some time, but here goes:
Rust down the rocker and inside the cab: https://lh3.googleusercontent.com/-b...0/IMG_0653.JPG The cab corner (filled with expando foam as a cheap and easy way to keep out the elements.) https://lh3.googleusercontent.com/-D...0/IMG_0655.JPG Cutting away the cancer: https://lh5.googleusercontent.com/-A...2/IMG_0659.jpg https://lh4.googleusercontent.com/-0...2/IMG_0660.jpg https://lh6.googleusercontent.com/-m...0/IMG_0663.JPG |
All times are GMT -4. The time now is 12:11 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com