The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   LSx Classifieds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=247)
-   -   2005 SSR 5.3 All Alum (https://67-72chevytrucks.com/vboard/showthread.php?t=619562)

1971 GMC SHORTY 03-07-2014 12:39 AM
2005 SSR 5.3 All Alum
 
1 Attachment(s)
Stand alone Wireing Harness Ready to Drop in... Not enough Torq For What I Need 2000.00 OBO Thanks Oh Yes Plus The Ride

1971 GMC SHORTY 03-07-2014 12:42 AM
Re: 2005 SSR 5.3 All Alum
 
1 Attachment(s)
Quote:
Originally Posted by 1971 GMC SHORTY (Post 6561931)
Stand alone Wireing Harness Ready to Drop in... Not enough Torq For What I Need 2000.00 OBO Thanks Oh Yes Plus The Ride
Another Picture

bigbluthng 03-08-2014 09:33 PM
Re: 2005 SSR 5.3 All Alum
 
engine only no trans? what else besides a fuel system and engine mounts would be needed?

1971 GMC SHORTY 03-08-2014 09:54 PM
Re: 2005 SSR 5.3 All Alum
 
Quote:
Originally Posted by bigbluthng (Post 6564873)
engine only no trans? what else besides a fuel system and engine mounts would be needed?
No Trans it Had Turbo 400,
You Need Just a Pump and Fuel Lines
It Is set Up For Chevy Hard Mounts and I Think I Have a Pump and Presser Reguler

68redc10 03-11-2014 06:53 AM
Re: 2005 SSR 5.3 All Alum
 
How many miles are on this??

1971 GMC SHORTY 03-11-2014 11:14 AM
Re: 2005 SSR 5.3 All Alum
 
Quote:
Originally Posted by 68redc10 (Post 6569069)
How many miles are on this??
Rebuilt. Then was Broken In and Car was Totaled

faribran 06-03-2014 06:59 PM
Re: 2005 SSR 5.3 All Alum
 
I would be interested in the alt/power steering bracket if you would separate. Thank you

70blackfish 07-08-2014 11:06 AM
Re: 2005 SSR 5.3 All Alum
 
Still have this?

1971 GMC SHORTY 07-08-2014 12:54 PM
Re: 2005 SSR 5.3 All Alum
 
Yes I do have inline fuel pump Now

Blazerowner 07-24-2014 10:20 PM
Re: 2005 SSR 5.3 All Alum
 
Pm sent

Hardesty454 07-29-2014 11:37 PM
Re: 2005 SSR 5.3 All Alum
 
Still available? Quick question on year though. I though in 05 they swapped the 5.3 to a 6.0? Might be wrong. Interested either way.

1971 GMC SHORTY 07-30-2014 02:10 AM
Re: 2005 SSR 5.3 All Alum
 
Quote:
Originally Posted by Hardesty454 (Post 6781332)
Still available? Quick question on year though. I though in 05 they swapped the 5.3 to a 6.0? Might be wrong. Interested either way.
Still Here it's 2004, looked at notes I Have on it don't no What happened With that. I have fuel Pump Single Fuel line Return from Filter

Hardesty454 07-30-2014 09:37 AM
Re: 2005 SSR 5.3 All Alum
 
You said it was rebuilt and broken in, who rebuilt it? How many miles were on the break in. Anything done to it or stock rebuild. Aluminum block or just the heads.

1971 GMC SHORTY 07-30-2014 10:01 AM
Re: 2005 SSR 5.3 All Alum
 
1 Attachment(s)
SSP and harnesses harness rebuilt the motor complete kit put it in the car was broken and Dyno before you put in the car motor had Less then a thousand miles out of the car before it was crashed
It's a complete aluminum motor block and heads

Twisted78SS 07-30-2014 10:15 AM
Re: 2005 SSR 5.3 All Alum
 
Interested pending cost to ship.
Could you get a shipping quote to a business address in 98686

1971 GMC SHORTY 07-30-2014 10:49 AM
Re: 2005 SSR 5.3 All Alum
 
Quote:
Originally Posted by Twisted78SS (Post 6781711)
Interested pending cost to ship.
Could you get a shipping quote to a business address in 98686
Do u have A Place to Ship to with a Forklift

1971 GMC SHORTY 07-30-2014 10:54 AM
Re: 2005 SSR 5.3 All Alum
 
1 Attachment(s)
Set up with Chevy mounts ready to Bolt in

1971 GMC SHORTY 07-30-2014 10:57 AM
Re: 2005 SSR 5.3 All Alum
 
1 Attachment(s)
Quote:
Originally Posted by 1971 GMC SHORTY (Post 6781747)
Set up with Chevy mounts ready to Bolt in
Never Been Over Heated

1971 GMC SHORTY 07-30-2014 02:19 PM
Re: 2005 SSR 5.3 All Alum
 
Quote:
Originally Posted by Twisted78SS (Post 6781711)
Interested pending cost to ship.
Could you get a shipping quote to a business address in 98686
PM Sent

Twisted78SS 07-30-2014 06:49 PM
Re: 2005 SSR 5.3 All Alum
 
Yes, forklift is available for offloading.

1971 GMC SHORTY 08-01-2014 12:44 PM
Re: 2005 SSR 5.3 All Alum
 
Quote:
Originally Posted by Twisted78SS (Post 6782258)
Yes, forklift is available for offloading.
PM Sent

1971 GMC SHORTY 08-07-2014 11:13 AM
Re: 2005 SSR 5.3 All Alum
 
Will Trade For A Complete 348 Engine

nibs 08-08-2014 08:58 AM
Re: 2005 SSR 5.3 All Alum
 
Would you part with any of the accessories??? Crank pulley and tensioner?

1971 GMC SHORTY 08-08-2014 01:45 PM
Re: 2005 SSR 5.3 All Alum
 
Quote:
Originally Posted by nibs (Post 6793395)
Would you part with any of the accessories??? Crank pulley and tensioner?
Why Would I do That? Lol

laid67c10 08-25-2014 10:58 PM
Re: 2005 SSR 5.3 All Alum
 
What's the price shipped to a fed ex loading dock in Longview, Tx?


All times are GMT -4. The time now is 01:18 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com