The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   I need help with a steering gearbox rebuild (https://67-72chevytrucks.com/vboard/showthread.php?t=799397)

superdav 01-10-2020 11:27 PM
I need help with a steering gearbox rebuild
 
I need a rebuild kit for my steering gearbox and I've learned Amazon's car part finder is not trustworthy
so far I've bought
Edelmann 8522 which Amazon said was the right one for my 84 2wd and it wasn't, the first part I tried to put on was the wrong size, a piston seal
so i searched using the number on the casting 7802644 L and found the next one
Edelmann 7857 on Rock Auto and that kit is not right either. The bearings are way off.
The casting
https://i.imgur.com/6OWa6dbl.jpg

Pontiac1976 01-12-2020 04:39 PM
Re: I need help with a steering gearbox rebuild
 

EDELMANN 8523

SUNSONG 8401228

GATES 351300 {#2781} Stg. Gear Major Seal Kit

EDELMANN 8524 Power Steering Repair Kit; Includes Bearings Info One of our most popular parts

GATES 350440 {#2641} Includes Bearings; Stg. Gear Complete Rebuilding Kit Info One of our most popular parts

ACDELCO 36351300 {#19146616}

SUNSONG 8401229 Includes Bearings
(Only 1 Remaining)

ACDELCO 36350440 {#19146549} Professional; Includes Bearings

ACDELCO 07813631 Includes Bearings
800 GEAR VARIABLE

ACDELCO 05687182

Power Steering; SEAL KIT,W/VALVE RING,HYD STEERING GEAR

This is the list RockAuto for a 84 2WD.
you may want to talk to rock auto about your part your kit.

superdav 01-18-2020 04:27 PM
Re: I need help with a steering gearbox rebuild
 
Went to oreillys and ordered the Precision 28401229 which oreillys said was the same as the GATES 350440 but the bearings aren’t the same, the original has a raised ring around one end. I’m going to measure all the parts when I get home
Is this ok Or do I have a bastard gearbox?

superdav 01-18-2020 09:34 PM
Re: I need help with a steering gearbox rebuild
 
Anybody?

kipps 01-19-2020 02:04 PM
Re: I need help with a steering gearbox rebuild
 
Most folks just chunk out the cash and replace the box. I've done that in the past.

I'm glad to see someone pursuing a DIY rebuild. I hope you make it happen, and I further hope you document it to encourage others to do the same.

I've got a box that was left out in the weather with the lines off. I may pursue a teardown and rebuild of that at some point. If I do, I'd be thrilled to be able to follow someone else's experience, instead of attempting to blaze my own trail.

superdav 01-19-2020 06:06 PM
Re: I need help with a steering gearbox rebuild
 
Quote:
Originally Posted by kipps (Post 8662301)
Most folks just chunk out the cash and replace the box. I've done that in the past.

I'm glad to see someone pursuing a DIY rebuild. I hope you make it happen, and I further hope you document it to encourage others to do the same.

I've got a box that was left out in the weather with the lines off. I may pursue a teardown and rebuild of that at some point. If I do, I'd be thrilled to be able to follow someone else's experience, instead of attempting to blaze my own trail.
There’s only one reason I’m rebuilding it because it the original part and it’s made by Saginaw just like my M1 carbine, I’d like to think they were made in the same factory. I want everything in this resto to be done with my hands if possible

hatzie 01-20-2020 10:28 AM
Re: I need help with a steering gearbox rebuild
 
Some of the earlier Unit Repair manuals have detailed service info on the steering boxes.
The parts books will have the parts information. Sounds like the Chinese kits are not quite right. I've run into this with carburetors. Had to buy three kits to get the parts needed.

superdav 01-20-2020 02:20 PM
Re: I need help with a steering gearbox rebuild
 
Quote:
Originally Posted by hatzie (Post 8662813)
Some of the earlier Unit Repair manuals have detailed service info on the steering boxes.
The parts books will have the parts information. Sounds like the Chinese kits are not quite right. I've run into this with carburetors. Had to buy three kits to get the parts needed.
It’s an 84, the first kit had the right “size” bearings the second didn’t, this one is just like the first the OD and ID are right but there isnt a ridge around the end. Everything else is identical, is this an acceptable replacement? I know it could be installed but I’m worried it could “wander” around
https://i.imgur.com/SUC05RKl.jpg

v30crewcab 01-21-2020 11:08 AM
Re: I need help with a steering gearbox rebuild
 
it won't go anywere. use it.

superdav 01-21-2020 11:55 AM
Re: I need help with a steering gearbox rebuild
 
Quote:
Originally Posted by v30crewcab (Post 8663402)
it won't go anywere. use it.
After watching multiple videos on YouTube of people replacing the same bearing with the same no ridge bearing I started on it last night. Only one of those videos had the same as OEM replacement but he didn’t say where he got it


All times are GMT -4. The time now is 01:14 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com