The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   Canada Looking for bedside tool box pieces (https://67-72chevytrucks.com/vboard/showthread.php?t=789620)

chewychevy67 07-03-2019 12:19 AM
Looking for bedside tool box pieces
 
1 Attachment(s)
Looking for the piece that covers the lock on the right side of this picture. I don't believe 67 72 trucks came with this piece just the last few years had it. If you got one post a pic and how much shipped to S0k2t0 in Canada. Thanks.

chewychevy67 07-13-2019 12:42 AM
Re: Looking for bedside tool box pieces
 
1 Attachment(s)
It's part number 25 on this diagram just for reference

chewychevy67 07-19-2019 11:16 PM
Re: Looking for bedside tool box pieces
 
I would trade 3 used toolbox hinges for this piece as well.

chewychevy67 08-12-2019 11:16 PM
Re: Looking for bedside tool box pieces
 
3 Attachment(s)
Hinges for trade pictures

chewychevy67 08-27-2019 12:55 PM
Re: Looking for bedside tool box pieces
 
Ttt

chewychevy67 09-12-2019 09:26 AM
Re: Looking for bedside tool box pieces
 
Ttt

chewychevy67 12-24-2019 10:23 AM
Re: Looking for bedside tool box pieces
 
Ttt

chewychevy67 02-18-2020 10:39 AM
Re: Looking for bedside tool box pieces
 
Ttt

rustprimer 02-19-2020 12:44 PM
Re: Looking for bedside tool box pieces
 
Try rpmparts.ca in Saskatchewan or billstruckshop.com in Ontario. If they don't
carry them let me know.
Joe

chewychevy67 02-20-2020 05:40 PM
Re: Looking for bedside tool box pieces
 
I don't believe there are any reproduction parts for the tool box stuff

chewychevy67 03-19-2020 02:02 PM
Re: Looking for bedside tool box pieces
 
Ttt

chewychevy67 04-26-2020 07:07 PM
Re: Looking for bedside tool box pieces
 
Still looking

chewychevy67 05-12-2020 08:54 PM
Re: Looking for bedside tool box pieces
 
1 Attachment(s)
I'm looking for the door catch as well as the piece above

1774btcrew 05-12-2020 11:44 PM
Re: Looking for bedside tool box pieces
 
The door catch looks like it would be pretty simple to make

chewychevy67 05-12-2020 11:46 PM
Re: Looking for bedside tool box pieces
 
I agree but I thought I'd look for an original till I really need it. Measurements of it would do as well I guess so I could make it correctly. I don't have one to go off of.

1774btcrew 05-12-2020 11:49 PM
Re: Looking for bedside tool box pieces
 
I have a couple complete tool box set ups. I can see about measurements when I get to the shop.

chewychevy67 05-12-2020 11:51 PM
Re: Looking for bedside tool box pieces
 
I would appreciate that

1774btcrew 05-12-2020 11:52 PM
Re: Looking for bedside tool box pieces
 
I will have to see if one of them comes off easily as I cut the besides out with the doors. Hopefully the screws aren't too rusty

chewychevy67 07-13-2020 12:10 AM
Re: Looking for bedside tool box pieces
 
1 Attachment(s)
I have found the latch. I am now only looking for this piece still.

chewychevy67 08-10-2020 09:59 PM
Re: Looking for bedside tool box pieces
 
Ttt

chewychevy67 11-19-2020 12:41 AM
Re: Looking for bedside tool box pieces
 
I can't believe this is that hard to find. I may consider taking a whole door or whatever to find this piece if anyone has one. The hinges are sold so no pieces to trade.


All times are GMT -4. The time now is 05:26 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com