WTB Rear portion of a 2-Piece Driveshaft
1 Attachment(s)
WTB Rear portion of a 2-Piece Driveshaft that has the HD carrier bearing. I just need the rear driveshaft.
|
Re: WTB Rear portion of a 2-Piece Driveshaft
What length?
|
Re: WTB Rear portion of a 2-Piece Driveshaft
What length you got?
|
Re: WTB Rear portion of a 2-Piece Driveshaft
I've got a pile of them. Can you measure between the front shaft and the rear end? And what diameter is the tube?
|
Re: WTB Rear portion of a 2-Piece Driveshaft
30.75 inches plus or minus.
|
Re: WTB Rear portion of a 2-Piece Driveshaft
Closest one I have is 28.5" including the yoke. A longer yoke might do the trick.
|
Re: WTB Rear portion of a 2-Piece Driveshaft
Thanks for checking.
But yes, I meant to say 30.75 center of u-joint to center of u-joint. |
Re: WTB Rear portion of a 2-Piece Driveshaft
Well that's different. I'll have to check again, probably Mon or Tues.
|
Re: WTB Rear portion of a 2-Piece Driveshaft
I have a couple that are 33" at the center of the u-joints.
|
Re: WTB Rear portion of a 2-Piece Driveshaft
Quote:
Thanks though. |
Re: WTB Rear portion of a 2-Piece Driveshaft
anyone local?
|
Re: WTB Rear portion of a 2-Piece Driveshaft
Did you ever find one?
|
Re: WTB Rear portion of a 2-Piece Driveshaft
Quote:
|
Re: WTB Rear portion of a 2-Piece Driveshaft
I believe I have the one you are looking for. I can take a measurement from center of u-joint to center of u-joint and let you know.
|
Re: WTB Rear portion of a 2-Piece Driveshaft
I'm assuming that you need the HD driveshaft and not the light duty driveshaft since that is what is in the pic you posted?
|
Re: WTB Rear portion of a 2-Piece Driveshaft
Yes, when I wrecked my longbed back in the 80's, I just had the rear portion of the driveline shortened.
My uncle welded something that I could bolt to the 62 x-frame donor. My 65 is still on the 62 donor frame. I've been thinking of going back to a longbed, and to do that, I need the stock length of the rear portion of the driveline. |
3 Attachment(s)
I measured 43.5” center to center on the U joints. Let me know if this is what you are looking for
Posted via Mobile Device |
Re: WTB Rear portion of a 2-Piece Driveshaft
Thanks, I need 30.75 inches plus or minus center of u-joint to center of u-joint.
|
Re: WTB Rear portion of a 2-Piece Driveshaft
Quote:
|
Re: WTB Rear portion of a 2-Piece Driveshaft
Thanks,
Still looking for local. |
Re: WTB Rear portion of a 2-Piece Driveshaft
Quote:
|
All times are GMT -4. The time now is 09:12 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com