The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)
-   -   Amp Research Powerstep (https://67-72chevytrucks.com/vboard/showthread.php?t=718917)

mcmlxix 09-29-2016 03:19 AM

Amp Research Powerstep
 
Has anyone figured out how to mount a set of electric running boards from Amp Research? I'm going to be running 35's with a 5" lift and the significant other is going to need help getting in. Hell, it will make it a lot easier for me too.

https://www.electricstep.com/AMP-Res...1059_large.jpg

http://www.off-road.com/images/conte...p-12-22-10.jpg

http://image.trucktrend.com/f/104623...ll%2Bsteps.jpg

hemi43 09-29-2016 10:20 AM

Re: Amp Research Powerstep
 
I looked into something like this, but the torque box prevented me from using it because there was no room behind the rocker to hide the mechanism. I went with a permanently mounted step.

truckster 09-29-2016 06:48 PM

Re: Amp Research Powerstep
 
I like the idea, because I have to keep a milk crate in the back for my wife to climb in. I can see the torque boxes being a big problem. The price is also a big problem for me.

I took a look at the mechanism for the door steps on my motorhome. It doesn't seem all that complicated, and unless I'm way off, it seems to be powered by a windshield wiper motor. I may go the route of designing my own step when I get that far in my build. My second choice would be to have a step that has a permanent mount but with some type of breakaway.

mcmlxix 09-30-2016 05:42 AM

Re: Amp Research Powerstep
 
I already covered the bottom of the Blazer in Line-X so I need a bolt on option. It would be awesome to have the steps hide up in the rocker box, but that would take some custom fab work...

AMP doesn't picture any of their brackets so its hard to tell what might work.

rgreathouse 10-07-2016 01:40 AM

Re: Amp Research Powerstep
 
I've been interested in doing this as well. I'm trying to find a used set for mockup. Let me know if you get anywhere

T'S1972 10-08-2016 06:42 PM

Re: Amp Research Powerstep
 
Here is a Jimmy that has some kind of power step on it.


http://www.ebay.com/itm/GMC-Jimmy-Ch...m=262651331217

mcmlxix 10-13-2016 03:38 AM

Re: Amp Research Powerstep
 
Quote:

Originally Posted by T'S1972 (Post 7736884)
Here is a Jimmy that has some kind of power step on it.


http://www.ebay.com/itm/GMC-Jimmy-Ch...m=262651331217

that auction ended... but I found it on craigslist...

http://phoenix.craigslist.org/evl/cto/5790026953.html

I may try and contact them to find out more about the steps... They have the AMP logo on the brackets... to at least I know its possible.

GMC-YA68 10-13-2016 11:35 AM

Re: Amp Research Powerstep
 
Leno has a bronco that ICON built and has a single step. Almost looks like they cut one in half and used it. I contacted AMP and they said this.

The steps you see in the video with Jay Leno are made for the Broncos made by Icon. These are exclusive to Icon at this time. They are not available for purchase through us. And from the information I have they are not able to sell the steps except for with the vehicle. Please let me know if you have any questions.

If you get a hold of that guy with the Jimmy, get some pics!

rjstorm 10-14-2016 07:32 PM

Re: Amp Research Powerstep
 
1 Attachment(s)
Wanted to use a pair too but did not see a good way to mount them . So I went old school loop steps

mcmlxix 10-14-2016 08:23 PM

Re: Amp Research Powerstep
 
Found another option from a company in Utah. www.rockslideengineering.com

These are for a F150 Raptor and they have other truck and Jeep models....
http://www.rockslideengineering.com/...DR%20-%203.jpg

You can see a vide of them in the link below...

https://youtu.be/yQg8-ie9ge0

Rickenbach 10-19-2016 10:41 AM

Re: Amp Research Powerstep
 
Bestop makes steps very similar to the AMP Research steps. Maybe they would be more accommodating for a custom setup.

Martymoose 10-27-2016 12:09 PM

Re: Amp Research Powerstep
 
1 Attachment(s)
Try looking into this. Once I finish other projects this is on my list. I wanted a retractable one as well to keep the body lines clean, especially a single step instead of the full board. Haven't seen much info on these though, but haven't looked to hard lately.

GMC-YA68 10-27-2016 12:35 PM

Re: Amp Research Powerstep
 
ICON got back with me and said they want $1250 for their version! ouch.

I wonder how much these from Stylin will be...

mcmlxix 10-28-2016 06:51 AM

Re: Amp Research Powerstep
 
I definitely want full length steps. I want to be able to climb into the bed from the steps...

mister.freeze 10-28-2016 10:23 AM

Re: Amp Research Powerstep
 
Quote:

Originally Posted by rjstorm (Post 7742387)
Wanted to use a pair too but did not see a good way to mount them . So I went old school loop steps

How exactly did you mount them? Sheet metal screws to the rocker box? Custom brackets?

70K GMC 12-03-2017 08:17 PM

Re: Amp Research Powerstep
 
Following

chevyguy_72 12-05-2017 08:16 PM

Re: Amp Research Powerstep
 
https://www.youtube.com/watch?v=qX-BsApqQbo

Like this... I tried to find any info but other than this video... nothing... looks like they built some custom reinforcement into the floor for them... just wish i knew what they were off of so i could start to watch for some... Hinge mechanisms are specific to something... i know the ones on my duramax dont fold up like that... just at a angle next to the cab

GMC-YA68 12-06-2017 10:57 PM

Re: Amp Research Powerstep
 
Agree, different style trucks are visible at all times. My brother 15 f-250 that we just did fold up COMPLETELY under the truck you see absolutely nothing. This has got to be possible....

chevyguy_72 12-07-2017 05:01 PM

Re: Amp Research Powerstep
 
Quote:

Originally Posted by GMC-YA68 (Post 8098543)
Agree, different style trucks are visible at all times. My brother 15 f-250 that we just did fold up COMPLETELY under the truck you see absolutely nothing. This has got to be possible....

Whats the mounting surface look like on the f250? maybe thats the ticket?

DeadheadNM 12-07-2017 11:19 PM

Re: Amp Research Powerstep
 
Here's a vintage version of the step: https://www.ebay.com/itm/Vintage-NOS...FaBSF2&vxp=mtr

chevyguy_72 12-14-2017 02:03 PM

Re: Amp Research Powerstep
 
Anyone one on here have amp steps on another vehicle of theirs that have a horizontal mounting surface on the same level? My 2015 GMC does kind of... but one is shorter as it goes to the body mount in the front and the rear is longer as it mounts up higher on the body... So its level on there but wouldnt work for this application

GM man 12-17-2017 02:08 AM

Re: Amp Research Powerstep
 
Quote:

Originally Posted by hemi43 (Post 7728036)
I looked into something like this, but the torque box prevented me from using it because there was no room behind the rocker to hide the mechanism. I went with a permanently mounted step.

I've always wondered what the purpose of those boxes were. Anyone know? Surely you can fab something up where those steps can be mounted. I think they're awesome, like the best of both worlds. Expensive but awesome.

viking427 12-18-2017 12:20 AM

Re: Amp Research Powerstep
 
Quote:

Originally Posted by GM man (Post 8106992)
I've always wondered what the purpose of those boxes were. Anyone know? Surely you can fab something up where those steps can be mounted. I think they're awesome, like the best of both worlds. Expensive but awesome.

Torsion boxes. Provide support for the body, especially when doors are open. Too bad gm didn't use full box frame, instead of C channel, so they wouldn't be needed. These steps or competing styles should be fairly straight forward to modify to work on the blazer/Jimmy.

chevyguy_72 03-01-2018 01:37 PM

Re: Amp Research Powerstep
 
I ended up purchasing a set of used steps from a Jeep JK unlimited. They have a horizontal mounting surface front and rear... so i should be able to fab something up to the rocker boxes to hold them... might have to reinforce the boxes a bit but we shall see...

70K GMC 03-01-2018 01:39 PM

Re: Amp Research Powerstep
 
Interested in your findings


All times are GMT -4. The time now is 07:34 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com