The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Rearend Placement (https://67-72chevytrucks.com/vboard/showthread.php?t=320761)

lotik

12-26-2008 05:00 PM

Rearend Placement

I need a measurement from the rear of the frame to the center of the rearend. I removed the trailing arms and cut out the crossmember before measuring. I guess I will learn. I need to figure out the stock placement of the rear end again. Its a '67 Short.

Thanks for the help in advance.

john	12-26-2008 05:58 PM

Re: Rearend Placement

I would use the wheelbase. Then it would be correct.

lotik

12-27-2008 06:47 PM

Re: Rearend Placement

so that's from center of hub on rotor to center of hub on axle?

john	12-28-2008 02:40 PM

Re: Rearend Placement

Yes 115" SWB
127" LWB

lotik

12-28-2008 02:52 PM

Re: Rearend Placement

thanks john

All times are GMT -4. The time now is 05:38 PM.