![]() |
90's bench seat in a 75 Blazer
1 Attachment(s)
Looking to put a 90's style 60-40 split bench seat in my 75. Has anyone done it? I still want the passenger side to flip up so back seat can be used. Any advice/suggestions would be great. I searched the forum and didn't find anything.
|
Re: 90's bench seat in a 75 Blazer
I haven't done it personally, but if you have some fab skills, it shouldn't be too hard.
At a minimum you will have to relocate the mounting holes on the floor or modify the tracks. Worst case you will have to do some fab work to the tracks themselves. |
Re: 90's bench seat in a 75 Blazer
1 Attachment(s)
I put a 70,s bench in my 78,just made some brackets ,if you measure good you can use dr. side holes,but will have to drill on pass. side.I thought I had some pics of the brackets I made but can,t find them.
|
Re: 90's bench seat in a 75 Blazer
1 Attachment(s)
tahoe buckets... headrest taken out on original blazer seat tracks so passenger still flips forward
|
Re: 90's bench seat in a 75 Blazer
You could also find a seat out of an extended cab to get the tip and slide action.
|
All times are GMT -4. The time now is 11:06 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com