Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

I have made another batch of billet aluminum transfer case boot rings.....for the 69-72 K/5 Blazers...Jimmy.....and 4wd trucks with the NP205 TC

There are two versions:
One with an approximation of the K/5 logo......and one without

These are ¼" thick 6061 aluminum plate that has been CNC machined, black anodized and CNC engraved with the NP205 shift pattern...... not painted on

They are blank as of now and I will consider other engraving options for an additional charge, and limited to what I can fit on the space available.

The supply is limited...I made 40 pieces and 16 pieces already sold on other sites...they are going fast

PM if you would like to order one...price each includes: the ring, 4 black screws, 4 U-nuts, and shipping to lower 48

Paypal preferred, but I will accept other forms of payment including credit card

Edit 10/17/23: Unfortunately due to current economic policies that have led to runaway inflation,
I have had to raise the the price of these to cover the increased cost of producing and shipping them.
the new price is $79.00 each and still includes the fasteners and shipping.
Attachment 1837728 Attachment 1837727

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

I've sold 24 of these already...
still have several available...
thanks to all who bought one!

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

I would like one, Thx Mike

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

Mike...PM me for ordering info

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

Fellow member in GA...received his today...
sent me this picture
Attachment 1838806

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

One sold to Mr Banshee....thanks!

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

Recieved the Boot Retainer today, very nice piece! Thanks A1971Blazer!!

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

Thanks...post a pic when you get it installed...

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

Whitton, I received mine this week, It will be put under the Christmas Tree!
Thanks!

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

I have several more of these K/5 transfer case boot rings in black anodized...

I now have a GMC version available

I also have a few matching 4 speed boot rings...

Price is $58.00 each and includes matching black screws, U-nuts, and shipping

With K/5 Logo
Attachment 1849216

matching 4 speed boot ring
Attachment 1849217

GMC truck or Jimmy
Attachment 1849218

Shown on high hump with 4 speed before anodizing
The bare aluminum are available as well (but out of stock right now)
Attachment 1849219

Shown on high hump with black carpet
Attachment 1849220

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

you have one of the gmc versions in a polished version

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

Any chance you have a set of these without the extra piece hanging off? No shift info area, rings only.

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

I don't have any bare ones on hand right now..I will be running another batch in the next few weeks

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

I don't have any right now but I've had several requests for that style..I will be running another batch in the next few weeks and I could run a few without the shift pattern side on them...keep an eye on this thread and I'll post when they're in process...thanks

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

Yes I would be interested for sure on a set of the two oval rings without the kewl extras .. Thanks.

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

Side note: early blazers had the shift pattern with the ring , nothing on the knob. Later 71-72 had just a ring for the boot and pattern on knob. These are very nice pieces!!

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

Interesting info....I've never seen a factory ring with the shift pattern on it, but I know some had a sticker on the glove box lid that showed the procedure for using the 4WD....thanks for the kind words.

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

I will take one with GMC.
Thanks
Ron

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

with "Jimmy" or without?
Attachment 1863055

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

With thanks.
Ron

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

very nice work A1971Blazer !!! im trying to figure something for my 69 gmc, has the t-221. best i can have done is an engraved pattern on the knob

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

Here is a pic of a 1970 with the Dana transfer case

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

OK... yea...I forgot that some had the Dana TC..I've never seen the boot ring for one except in pictures

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

Ron....yours will ship today....thanks!

Re: Billet Aluminum 4X4 TC Shifter Boot Retainer...Anodized
 

Do you have any more of the one's without the K/5 logo?

thanks!