Sanderson BB8
 

Anybody out there that can recommend a starter that they used with Sanderson BB8 headers? I have searched the forum and see that they fit with little or no modification but didn’t see what starter was used. Any ideas? Thanks

Re: Sanderson BB8
 

I could use some help on this also. I'm on the 2nd starter that doesn't clear.

Side note: BB8's don't clear a TH350 either, although I think I can get past that hurdle with some flange trimming.

Re: Sanderson BB8
 

In guessing you’ve tried this already. High torque mini starter clear?
Got mine from summit for $125.

Re: Sanderson BB8
 

I have a PowerMaster mini starter on my 468 BBC with Headman Headers. The mini is about 1/2 the size of a standard started, maybe slightly larger than 1/2 the size. Anyway tons of room with the headers installed. It's also 'clockable' allowing the solenoid to be moved closer to the block.

Re: Sanderson BB8
 

Do you remember the part number to the starter? Thanks

Re: Sanderson BB8
 

That part number would be 9500.

https://www.summitracing.com/parts/pwm-9500

Re: Sanderson BB8
 

Im late to the game here, but I am running Sanderson BB8 headers on a big block in my 1970 C10 along with an MSD Dyna Force Mini Starter. It has plenty of clearance. Not Cheap, but works great.