|
67 K10 hubs
2 Attachment(s)
I need some new hubs for my 67 Chevy K10, one side is not working. Anyway it seems like new hubs are not easy to find for this. I did find one set on eBay that says they fit but they have the bolts around the outside where mine do not. Any advice for me? Will the eBay ones fit? First pic is my hub, second pic are the ones on eBay.
|
Re: 67 K10 hubs
I am 80 percent sure that the Dana Spicer OEM K10 hub will fit. The only unsure part on a 1967 is the splined area of the outer axle shaft. There needs to be a groove on the end for a snap ring retaining the hub clutch. If you can remove that hub that would be helpful.
|
Re: 67 K10 hubs
by the way the set you posted is missing the snap rings and the inner piece the spring rides on.
|
Re: 67 K10 hubs
This is the hub lock on my '67 K/10 Suburban. It's got aluminum parts.
[Picture edit didn't take. See below.] The Blue plastic knobs are like the ones on my '71 GMC Jimmy K/1500. |
Re: 67 K10 hubs
1 Attachment(s)
This is the all aluminum 1967 locking hub.
|
Re: 67 K10 hubs
Here is what the complete setup looks like straight from Dana Spicer
https://www.mahdikalani.com/static/8...d568249fb0.jpg |
Re: 67 K10 hubs
Quote:
|
| All times are GMT -4. The time now is 02:12 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com